JET

  • Layout
Jet EVS-949 Mill with 3-Axis Newall DP700 (Quill) DRO and Servo X, Y, Z-Axis Powerfeeds and USA Air Powered Draw Bar 894428 at Elite Metal Tools
Jet EVS-949 Mill with 3-Axis Newall DP700 (Quill) DRO and Servo X, Y, Z-Axis Powerfeeds and USA Air Powered Draw Bar 894428
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $51,894.80
$41,629
As low as $823.83/mo
View Details
Jet 3-Ton Two Speed Electric Chain Hoist 3-Phase 20' Lift | TS300-230-20 140118 at Elite Metal Tools
Jet 3-Ton Two Speed Electric Chain Hoist 3-Phase 20' Lift | TS300-230-20 140118
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
MSRP: $16,641.89
$9,461
As low as $307.48/mo
View Details
Jet JTM-4VS Mill With ACU-RITE 203 DRO With X-Axis Powerfeed 690107 at Elite Metal Tools
Jet JTM-4VS Mill With ACU-RITE 203 DRO With X-Axis Powerfeed 690107
  • Adjustable gibs throughout
  • Heavy duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $24,325.72
$19,397
As low as $383.86/mo
View Details
Jet JET — Replacement Filter Bag and Collection Bag Kit, 30 Micron, for DC-650 Dust Collector 708642B at Elite Metal Tools
Jet JET — Replacement Filter Bag and Collection Bag Kit, 30 Micron, for DC-650 Dust Collector 708642B
  • Includes 30 Micron filter bag and 5 clear plastic collection bags
MSRP: $229.67
$220
View Details
Jet JET —Replacement Charcoal Filters for IAFS1700/2400 Industrial Air Filtration Systems 415105 at Elite Metal Tools
Jet JET —Replacement Charcoal Filters for IAFS1700/2400 Industrial Air Filtration Systems 415105
$430
View Details
Jet E-1236VS With Collet Closer 892301 at Elite Metal Tools
Jet E-1236VS With Collet Closer 892301
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Integrated locking tool cabinet in stand on 12" Lathe
MSRP: $26,487.99
$20,986
As low as $415.31/mo
View Details
Jet JTM-4VS Mill With ACU-RITE 203 DRO With X and Y-Axis Powerfeeds 690098 at Elite Metal Tools
Jet JTM-4VS Mill With ACU-RITE 203 DRO With X and Y-Axis Powerfeeds 690098
  • Adjustable gibs throughout
  • Heavy duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $26,217.72
$20,787
As low as $411.37/mo
View Details
Jet JTM-4VS-1 Mill With 3-Axis ACU-RITE 203 DRO (Knee) With X-Axis Powerfeed 691411 at Elite Metal Tools
Jet JTM-4VS-1 Mill With 3-Axis ACU-RITE 203 DRO (Knee) With X-Axis Powerfeed 691411
  • Adjustable gibs throughout
  • Heavy duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $24,325.72
$19,397
As low as $383.86/mo
View Details
Jet E-1340VS With ACU-RITE 303 CSS DRO 892415 at Elite Metal Tools
Jet E-1340VS With ACU-RITE 303 CSS DRO 892415
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Inverter drive system provides infinitely variable spindle speeds
MSRP: $34,055.99
$27,365
As low as $541.55/mo
View Details
Jet 1-Ton Two Speed Electric Chain Hoist 3-Phase 15' Lift | TS100-460-015 144005 at Elite Metal Tools
Jet 1-Ton Two Speed Electric Chain Hoist 3-Phase 15' Lift | TS100-460-015 144005
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
MSRP: $9,870.29
$5,575
As low as $181.18/mo
View Details
Jet Open Stand for JSG-96 Sander - (708596) 708596 at Elite Metal Tools
Jet Open Stand for JSG-96 Sander - (708596) 708596
  • Compatible with Jet JSG-96 Sander
  • Shop the Jet store for all your replacement part needs
MSRP: $317.56
$291
View Details
Jet JTM-4VS Mill With ACU-RITE 203 DRO 690202 at Elite Metal Tools
Jet JTM-4VS Mill With ACU-RITE 203 DRO 690202
  • Adjustable gibs throughout
  • Heavy duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $22,568.80
$17,604
As low as $348.38/mo
View Details
Jet 5-Ton Two Speed Electric Chain Hoist 3-Phase 15 'Lift | TS500-460-015 144014 at Elite Metal Tools
Jet 5-Ton Two Speed Electric Chain Hoist 3-Phase 15 'Lift | TS500-460-015 144014
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
MSRP: $20,377.49
$11,422
As low as $371.21/mo
View Details
Jet JTM-2 Mill With 3-Axis Newall DP700 DRO (Knee) 691182 at Elite Metal Tools
Jet JTM-2 Mill With 3-Axis Newall DP700 DRO (Knee) 691182
  • Certified Meehanite® castings
  • Heavy duty splined motor drive
  • Internal coolant tank built into base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $22,433.72
$17,504
As low as $346.40/mo
View Details
Jet JTM-2 Mill With X-Axis Powerfeed 690006 at Elite Metal Tools
Jet JTM-2 Mill With X-Axis Powerfeed 690006
  • Certified Meehanite® castings
  • Heavy duty splined motor drive
  • Internal coolant tank built into base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $18,244.26
$14,275
As low as $463.93/mo
View Details
Jet 30" Rip ProShop Rail Set, JPSR-30: 708483 at Elite Metal Tools
Jet 30" Rip ProShop Rail Set, JPSR-30: 708483
$467
View Details
Jet JET — Replacement Filter for JDCS-505 Dust Collector 414840 at Elite Metal Tools
Jet JET — Replacement Filter for JDCS-505 Dust Collector 414840
  • Specifically designed for Metalworking dust collection
  • Filter Efficiency: 90% @ 50 Microns
  • Filter Size: 6-3/4 X 2-5/8 X 13-1/2 In.
MSRP: $581.12
$566
As low as $18.39/mo
View Details
Jet JAT-480, 1/4", 1 HP Die Grinder 505480 at Elite Metal Tools
Jet JAT-480, 1/4", 1 HP Die Grinder 505480
  • 360° Rotating air inlet keeps the air hose tangle free for added safety
  • Comes standard with 1/4" Erickson collet
  • Impact resistant composite housings reduce tool weight and user fatigue.
  • Sealed ball bearing design keeps out contaminants promoting smooth operation
  • Upgraded Full, 1 HP motors provide the heavy-duty power needed for harsh industrial environments
MSRP: $355.29
$245
View Details
Jet TS500-460-015,5-Ton Two Speed Electric Chain Hoist 3-Phase 15' Lift, MT500-4 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 11ft 144014K at Elite Metal Tools
Jet TS500-460-015,5-Ton Two Speed Electric Chain Hoist 3-Phase 15' Lift, MT500-4 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 11ft 144014K
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
  • 5 Pocket Chain Sprocket provides reduced vibration, smoother operation, and reduced chain wear during long lifting or lowering of loads
MSRP: $21,750.29
$12,284
As low as $399.23/mo
View Details
Jet JET — Replacement Filter Bag and Collection Bag Kit, 5 Micron, for DC-650 Dust Collector 708642MF at Elite Metal Tools
Jet JET — Replacement Filter Bag and Collection Bag Kit, 5 Micron, for DC-650 Dust Collector 708642MF
  • Includes 5 Micron filter bag and 5 clear plastic collection bags
  • Filter bag is 98% efficient on 5 micron particles; 92% efficient on 3 micron; and 74% efficient on 1 micron
  • Much higher filtration efficiency than the 30 micron unit but similar in budget
  • Excellent performance in a multitude of operating conditions
$231
View Details
Jet JET — Replacement Bimetal Band Saw Blade, 1" X .035" X 144" (4/6T) for EHB-1018VM/H Band Saw 891097 at Elite Metal Tools
Jet JET — Replacement Bimetal Band Saw Blade, 1" X .035" X 144" (4/6T) for EHB-1018VM/H Band Saw 891097
  • Bimetal
  • 4/6T
  • 1" X .035" X 144"
MSRP: $245.95
$237
View Details
Jet 2-Ton Two Speed Electric Chain Hoist 3-Phase 20' Lift | TS200-460-020 144009 at Elite Metal Tools
Jet 2-Ton Two Speed Electric Chain Hoist 3-Phase 20' Lift | TS200-460-020 144009
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
MSRP: $14,490.29
$8,191
As low as $266.20/mo
View Details
Jet EVS-949 Mill with 3-Axis Newall DP700 (Quill) DRO and X, Y, Z-Axis JET Powerfeeds and USA Made Air Draw Bar 894364 at Elite Metal Tools
Jet EVS-949 Mill with 3-Axis Newall DP700 (Quill) DRO and X, Y, Z-Axis JET Powerfeeds and USA Made Air Draw Bar 894364
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $49,191.99
$39,643
As low as $784.53/mo
View Details
Jet JTM-949EVS Mill With 3-Axis Acu-Rite 203 DRO (Knee) With X and Y-Axis Powerfeeds and Air Powered Draw Bar 690528 at Elite Metal Tools
Jet JTM-949EVS Mill With 3-Axis Acu-Rite 203 DRO (Knee) With X and Y-Axis Powerfeeds and Air Powered Draw Bar 690528
  • Automatic oiler releases 3 to 6 cc/cy of lubrication every 30 minutes
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $35,677.72
$28,556
As low as $565.12/mo
View Details

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.