JET

  • Layout
Jet EVS-949 Mill with 3-Axis ACU-RITE 303 (Quill) DRO and X-Axis JET Powerfeed 894338 at Elite Metal Tools
Jet EVS-949 Mill with 3-Axis ACU-RITE 303 (Quill) DRO and X-Axis JET Powerfeed 894338
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $37,728
$30,709
As low as $607.73/mo
View Details
Jet JTM-1 Mill With 3-Axis Newall DP500 DRO (Knee) 692182 at Elite Metal Tools
Jet JTM-1 Mill With 3-Axis Newall DP500 DRO (Knee) 692182
  • Certified Meehanite® castings
  • Heavy duty splined motor drive
  • Internal coolant tank built into base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $17,187.14
$13,889
As low as $451.39/mo
View Details
Jet EVS-949 Mill with 3-Axis ACU-RITE 303 (Quill) DRO and X, Y-Axis JET Powerfeeds 894340 at Elite Metal Tools
Jet EVS-949 Mill with 3-Axis ACU-RITE 303 (Quill) DRO and X, Y-Axis JET Powerfeeds 894340
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $39,214.57
$31,919
As low as $631.67/mo
View Details
Jet JTM-1254RVS with 3-Axis ACU-RITE MILLPOWER CNC with Air Power Drawbar 691945 at Elite Metal Tools
Jet JTM-1254RVS with 3-Axis ACU-RITE MILLPOWER CNC with Air Power Drawbar 691945
  • 12.1" High resolution display (1024 x 768) with 3D graphics
  • 3-D Contouring, ability to import and run G-code files from CAD/CAM programs
  • Adjustable gibs throughout
  • Automatic Lubrication every 180 minutes with a flow of 3-6cc reduces maintenance
  • Available offline software
MSRP: $61,427.34
$49,999
As low as $989.48/mo
View Details
Jet JET — Replacement Bimetal Band Saw Blade, 1" X .035" X 114-1/2" (5/8T) for EHB-8VS/M 891091 at Elite Metal Tools
Jet JET — Replacement Bimetal Band Saw Blade, 1" X .035" X 114-1/2" (5/8T) for EHB-8VS/M 891091
  • Bimetal
  • 5/8T
  • 1" X .035" X 114-1/2"
MSRP: $215.03
$193
View Details
Jet JTM-4VS Mill With Air Powered Draw Bar 690119 at Elite Metal Tools
Jet JTM-4VS Mill With Air Powered Draw Bar 690119
  • Adjustable gibs throughout
  • Heavy duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $17,542.86
$14,359
As low as $466.66/mo
View Details
Jet Mill With 3-Axis ACU-RITE 200S DRO (Quill) and X-Axis Powerfeeds - (JTM-4VS) 690221 at Elite Metal Tools
Jet Mill With 3-Axis ACU-RITE 200S DRO (Quill) and X-Axis Powerfeeds - (JTM-4VS) 690221
  • Adjustable gibs throughout
  • Heavy duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $21,071.43
$17,249
As low as $341.35/mo
View Details
Jet 1/4-Ton Electric Chain Hoist 1-Phase 20' Lift | BLVS025-020 104013 at Elite Metal Tools
Jet 1/4-Ton Electric Chain Hoist 1-Phase 20' Lift | BLVS025-020 104013
  • Comes standard with Wireless Controller that can infinitely adjust speed from creep to 4ft/min with speed dial and max of 41ft/min in high speed
  • TAA Approved
  • Single phase 120V plug enables use in all areas and the Permanent Magnet Brushless Motor has the lowest required starting current available at just 10amp.
  • Overload protection using slip clutch system to protect hoist from loads over rated capacities
  • DC Brushless motor designed for a longer lifespan than normal Electric Hoist motors reducing maintenance costs
MSRP: $5,982
$3,752.18
As low as $121.94/mo
View Details
Jet JET — Infeed Table for MBS-1323EVS 891171 at Elite Metal Tools
Jet JET — Infeed Table for MBS-1323EVS 891171
  • 18 f/min. maximum transfer speed
  • 11" distance between rollers
  • Six rollers
  • 50-300 SFPM Variable Speed
  • 7716 lb Capacity load
MSRP: $6,004.29
$4,859
As low as $157.91/mo
View Details
Jet JET — Replacement Blade,-1" x .035" x 130" x 8/12VT for HBS-1018W 414310 at Elite Metal Tools
Jet JET — Replacement Blade,-1" x .035" x 130" x 8/12VT for HBS-1018W 414310
  • Carbon steel
  • 8/12VT
  • 1" x .035" x 130"
$164
View Details
Jet JTM-4VS Mill With 3-Axis ACU-RITE 203 DRO (Quill), X, Y and Z-Axis Powerfeeds With Power Drawbar 690153 at Elite Metal Tools
Jet JTM-4VS Mill With 3-Axis ACU-RITE 203 DRO (Quill), X, Y and Z-Axis Powerfeeds With Power Drawbar 690153
  • Adjustable gibs throughout
  • Heavy duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $26,962.86
$21,879
As low as $432.98/mo
View Details
Jet JCT-1605, Floor Sand Rammer / Backfill Tamper 550605 at Elite Metal Tools
Jet JCT-1605, Floor Sand Rammer / Backfill Tamper 550605
  • All Steel cylinder housing for increased durability
  • Heavy-Duty, industry proven valve design
  • Highly efficient way to quickly compact backfill and sand
  • Maximum power with slow, powerful blows for compacting large sand molds
  • Backed by the industry leading 2-Year Warranty
MSRP: $1,676
$1,140.99
As low as $37.08/mo
View Details
Jet MT200, 2 Ton Two Speed Electric Trolley 3-Phase 230V 140187 at Elite Metal Tools
Jet MT200, 2 Ton Two Speed Electric Trolley 3-Phase 230V 140187
  • Heavy-Duty motor puts out up to 0.8HP making it the strongest in it's class
  • TAA Approved
  • Two speeds reduces bump firing to while still allowing high speed movement of materials
  • Indoor and Outdoor use with IP-55 rating for trolley and IP-65 rating for the pendant
  • Expanded flange capacity kits are available
MSRP: $3,793
$2,379.99
As low as $77.34/mo
View Details
Jet 1/2-Ton Two Speed Electric Chain Hoist 3-Phase 10' Lift | TS050-460-010 144001 at Elite Metal Tools
Jet 1/2-Ton Two Speed Electric Chain Hoist 3-Phase 10' Lift | TS050-460-010 144001
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
  • 5 Pocket Chain Sprocket provides reduced vibration, smoother operation, and reduced chain wear during long lifting or lowering of loads
MSRP: $6,368
$3,993
As low as $129.77/mo
View Details
Jet Taper Attachment for ELITE E-1340 and E-1440 Lathes 892035 at Elite Metal Tools
Jet Taper Attachment for ELITE E-1340 and E-1440 Lathes 892035
  • 10° Inclusive cutting capacity
  • Factory installation available
  • Mounts to predrilled and tapped holes
  • Specifically designed for Elite E-1340VS and E-1440VS Lathes
MSRP: $2,464.29
$2,029
As low as $65.94/mo
View Details
Jet JET —6 in Riser Block for JTM-1/2/4VS Mill 350090 at Elite Metal Tools
Jet JET —6 in Riser Block for JTM-1/2/4VS Mill 350090
  • Adds 6" height capacity
  • Includes all mounting hardware
  • Specially designed for each model
MSRP: $901.43
$789
As low as $25.64/mo
View Details
Jet EVS-949 Mill with 3-Axis Newall DP700 (Knee) DRO and Servo X, Y, Z-Axis Powerfeeds and USA Air Powered Draw Bar 894434 at Elite Metal Tools
Jet EVS-949 Mill with 3-Axis Newall DP700 (Knee) DRO and Servo X, Y, Z-Axis Powerfeeds and USA Air Powered Draw Bar 894434
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $45,099.43
$36,709
As low as $726.47/mo
View Details
Jet JET — Replacement Filter Bag and Collection Bag Kit, 30 Micron, for DC-650 Dust Collector 708642B at Elite Metal Tools
Jet JET — Replacement Filter Bag and Collection Bag Kit, 30 Micron, for DC-650 Dust Collector 708642B
  • Includes 30 Micron filter bag and 5 clear plastic collection bags
MSRP: $184.27
$179
View Details
Jet JET — Taper Attachment Kit for 14 in ZX Series Lathes 321291 at Elite Metal Tools
Jet JET — Taper Attachment Kit for 14 in ZX Series Lathes 321291
  • 10° Inclusive cutting capacity
  • Mounts to predrilled and tapped holes
  • Specially designed for each model
  • 26.6 x 12.7 x 9.8 in
  • Attachment length 18 in
MSRP: $5,034.29
$4,199
As low as $136.46/mo
View Details
Jet 2-Ton Two Speed Electric Chain Hoist 3-Phase 20' Lift | TS200-230-020 140240 at Elite Metal Tools
Jet 2-Ton Two Speed Electric Chain Hoist 3-Phase 20' Lift | TS200-230-020 140240
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
MSRP: $11,716
$7,348
As low as $238.81/mo
View Details
Jet JET — Replacement Bimetal Band Saw Blade, 1" X .035" X 144" (4/6T) for EHB-1018VM/H Band Saw 891097 at Elite Metal Tools
Jet JET — Replacement Bimetal Band Saw Blade, 1" X .035" X 144" (4/6T) for EHB-1018VM/H Band Saw 891097
  • Bimetal
  • 4/6T
  • 1" X .035" X 144"
MSRP: $201.08
$191
View Details
Jet JTM-1050EVS2/230 Mill With Acu-Rite 203 DRO With X-Axis Powerfeed 690619 at Elite Metal Tools
Jet JTM-1050EVS2/230 Mill With Acu-Rite 203 DRO With X-Axis Powerfeed 690619
  • Automatic oiler releases 3 to 6 cc/cy of lubrication at adjustable time intervals
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $27,442.86
$22,099
As low as $437.33/mo
View Details
Jet JET — Heat Resistant Dust Collection Hose, 4 in dia x 2.5M length, Max 180 degrees 414715 at Elite Metal Tools
Jet JET — Heat Resistant Dust Collection Hose, 4 in dia x 2.5M length, Max 180 degrees 414715
  • Flexible
  • For temperatures up to 180 degrees F
  • 2.5M length
  • Hose dia 4 in.
MSRP: $517.14
$490
View Details
Jet EVS-949 Mill with 3-Axis Newall DP700 (Quill) DRO and X-Axis JET Powerfeed 894359 at Elite Metal Tools
Jet EVS-949 Mill with 3-Axis Newall DP700 (Quill) DRO and X-Axis JET Powerfeed 894359
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $35,860.57
$29,189
As low as $577.65/mo
View Details

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.