JET

  • Layout
Jet JET — Buffer Dust Shroud, 8 in 578400 at Elite Metal Tools
Jet JET — Buffer Dust Shroud, 8 in 578400
  • Compatible with JET models IBG-8SSB and IBG-8VSB bench buffers
  • Heavy duty 14 gauge steel buffer hood housing, 4" exhaust outlet, & 10 gauge mounting plates and brackets
$549
As low as $17.84/mo
View Details
Jet EVS-949 Mill with 3-Axis ACU-RITE 303 (Quill) DRO and X, Y, Z-Axis JET Powerfeeds and USA Made Air Draw Bar 894343 at Elite Metal Tools
Jet EVS-949 Mill with 3-Axis ACU-RITE 303 (Quill) DRO and X, Y, Z-Axis JET Powerfeeds and USA Made Air Draw Bar 894343
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $50,678.53
$40,735
As low as $806.14/mo
View Details
Jet EVS-949 Mill with 3-Axis ACU-RITE 203 (Knee) DRO and X, Y, Z-Axis JET Powerfeeds 894328 at Elite Metal Tools
Jet EVS-949 Mill with 3-Axis ACU-RITE 203 (Knee) DRO and X, Y, Z-Axis JET Powerfeeds 894328
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $45,678.26
$35,904
As low as $710.54/mo
View Details
Jet 2-Ton Electric Chain Hoist 1-Phase 10' Lift | BLVS200-010 104044 at Elite Metal Tools
Jet 2-Ton Electric Chain Hoist 1-Phase 10' Lift | BLVS200-010 104044
  • Comes standard with Wireless Controller that can infinitely adjust speed from creep to 4ft/min with speed dial and max of 41ft/min in high speed
  • TAA Approved
  • Single phase 120V plug enables use in all areas and the Permanent Magnet Brushless Motor has the lowest required starting current available at just 10amp.
  • Overload protection using slip clutch system to protect hoist from loads over rated capacities
  • DC Brushless motor designed for a longer lifespan than normal Electric Hoist motors reducing maintenance costs
MSRP: $14,479.29
$8,186
As low as $266.04/mo
View Details
Jet JAT-106, 3/8" Compact Impact Wrench 505106 at Elite Metal Tools
Jet JAT-106, 3/8" Compact Impact Wrench 505106
  • 3 Position forward & reverse power settings
  • Aluminum construction
  • Compact design of 4-5/7" long for hard to reach or tight work spaces
  • Ergonomically Designed Grip
  • Lightweight aluminum construction
MSRP: $304.69
$215
View Details
Jet DC-1200VX-CK3 Dust Collector, 2HP 3PH 230/460V, 2-Micron Canister Kit 710704K at Elite Metal Tools
Jet DC-1200VX-CK3 Dust Collector, 2HP 3PH 230/460V, 2-Micron Canister Kit 710704K
  • Eliminates premature filter clogging for sustained performance
  • High air velocity (CFM) design stands up to any competitive specifications
  • Includes four casters for maneuverability and total portability
  • Industrial controls designed for years of trouble-free use
  • Permanently lubricated, totally enclosed, fan-cooled motors are rated for continuous-duty
MSRP: $1,418.99
$1,205
As low as $39.16/mo
View Details
Jet J-3130, 5" x 8" Horizontal Bandsaw 414461 at Elite Metal Tools
Jet J-3130, 5" x 8" Horizontal Bandsaw 414461
  • Adjustable blade guides with side eccentric shaft with ball bearings with rear-ball bearings
  • Adjustable Material Stop
  • Blade drive is a steel, heat treated worm driving a bronze worm gear in an oil bath
  • Blade guides with side eccentric shaft with ball bearings
  • Fully adjustable hydraulic downfeed system
MSRP: $1,959.53
$1,635
As low as $53.13/mo
View Details
Jet 10" x 16" Horizontal Bandsaw | J-7040 414478 at Elite Metal Tools
Jet 10" x 16" Horizontal Bandsaw | J-7040 414478
  • Adjustable blade guide with six contact point system that utilizes cam follower bearings mounted on eccentric shafts on both sides of the blades
  • Adjustable Material Stop
  • Heavy-duty transmission utilizes hardened and ground gears operating in an oil bath
  • Patented 3-Jaw vise with rapid action moveable jaw for faster set up
  • Swing away control panel houses major saw controls
MSRP: $9,892.40
$7,799
As low as $253.46/mo
View Details
Jet JET — X-Axis Table Powerfeed for Milling Machines 350194 at Elite Metal Tools
Jet JET — X-Axis Table Powerfeed for Milling Machines 350194
  • 13L x 13W x 14 inH
  • Adjustable stops allow automatic shut off
  • Built-in clutch helps prevent damage in overload
  • Includes rapid traverse button
  • Factory installation is available
MSRP: $1,351.45
$1,162
As low as $37.76/mo
View Details
Jet EVS-949 Mill with ACU-RITE 203 DRO and X, Y, Z-Axis Powerfeeds and Air Powered Draw Bar 894315 at Elite Metal Tools
Jet EVS-949 Mill with ACU-RITE 203 DRO and X, Y, Z-Axis Powerfeeds and Air Powered Draw Bar 894315
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $47,840.53
$38,939
As low as $770.60/mo
View Details
Jet JET — Flood Coolant System for 2221VS Drill Press 1hp 1 phase 115/220V 5512104 at Elite Metal Tools
Jet JET — Flood Coolant System for 2221VS Drill Press 1hp 1 phase 115/220V 5512104
  • Flood Style
  • 1/8 HP
  • 115/220V, 1Ph
MSRP: $675.72
$644
As low as $20.93/mo
View Details
Jet EVS-949 Mill with X-Axis JET Powerfeed 894300 at Elite Metal Tools
Jet EVS-949 Mill with X-Axis JET Powerfeed 894300
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $35,812.80
$28,655
As low as $567.08/mo
View Details
Jet 5C Lever Type Collet Closer For ELITE E-1236VS Lathe 892006 at Elite Metal Tools
Jet 5C Lever Type Collet Closer For ELITE E-1236VS Lathe 892006
  • Precision ground components
  • Rear mounted lever action
  • Some drilling and other modifications may be required for installation
  • Specifically designed for Elite E-1236VS Lathes
MSRP: $3,783.99
$3,034
As low as $98.60/mo
View Details
Jet JAT-412, 1/4" Industrial Gearless Die Grinder 505412 at Elite Metal Tools
Jet JAT-412, 1/4" Industrial Gearless Die Grinder 505412
  • Advanced easy release safety lever
  • Comes with two wrenches for easy accessory changes
  • Composite handle for easy cleaning and comfort during extended use
  • Direct drive replaces beveled gearing for extended life
  • Kevlar rotor vanes to extend life and reduce maintenance
MSRP: $392.69
$269
View Details
On Sale
Jet 8 x 13 Variable Speed Mitering Bandsaw | EHB-8VSM 891020 at Elite Metal Tools
Jet 8 x 13 Variable Speed Mitering Bandsaw | EHB-8VSM 891020
  • Adjustable Material Stop
  • Automatic blade shut off switch stops the sawing process
  • Built-in, self-propelled chip brush prevents chip build up in blade guides
  • Integrated pressurized wash hose for easy machine cleaning
  • Large handwheel with blade tensioning gauge accurately measures blade pressure
MSRP: $11,351.99
Was: $8,927
Now: $7,141.60
As low as $232.10/mo
View Details
Jet JTM-1050EVS2/230 Mill With 3-Axis Newall DP700 DRO (Knee) With X and Y-Axis Powerfeeds and Air Powered Draw Bar 690642 at Elite Metal Tools
Jet JTM-1050EVS2/230 Mill With 3-Axis Newall DP700 DRO (Knee) With X and Y-Axis Powerfeeds and Air Powered Draw Bar 690642
  • Automatic oiler releases 3 to 6 cc/cy of lubrication at adjustable time intervals
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $37,164.26
$29,648
As low as $586.73/mo
View Details
Jet JTM-4VS-1 Mill With X and Y-Axis Powerfeeds 690197 at Elite Metal Tools
Jet JTM-4VS-1 Mill With X and Y-Axis Powerfeeds 690197
  • Adjustable gibs throughout
  • Heavy duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $21,622.80
$16,909
As low as $334.62/mo
View Details
Jet JET — Replacement 2 Micron Canister Filter for DC Dust Collectors 1100/1100VX, 1200, 120VX 708639B at Elite Metal Tools
Jet JET — Replacement 2 Micron Canister Filter for DC Dust Collectors 1100/1100VX, 1200, 120VX 708639B
  • Includes(1) 2 micron canister filter and (5) clear plastic collection bags
MSRP: $635.13
$588
As low as $19.11/mo
View Details
Jet 2HP, 460V with 3Ph Power Down Feed | JDP-20EVST-460-PDF 354246 at Elite Metal Tools
Jet 2HP, 460V with 3Ph Power Down Feed | JDP-20EVST-460-PDF 354246
  • CSA Coolant System
  • Front Mounted LED Spindle RPM Readout
  • Front mounted positive control depth stop
  • Heavy-duty steel column for increased precision and rigidity
  • High torque at all speeds both forward and reverse
MSRP: $11,216.80
$9,129
As low as $296.69/mo
View Details
Jet Stand for Jet JWL-1221VS Lathe 719202A at Elite Metal Tools
Jet Stand for Jet JWL-1221VS Lathe 719202A
$478
View Details
Jet EVS-949 Mill with 2-Axis ACU-RITE 303 DRO and Servo X-Axis Powerfeed 894399 at Elite Metal Tools
Jet EVS-949 Mill with 2-Axis ACU-RITE 303 DRO and Servo X-Axis Powerfeed 894399
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $43,515.99
$34,315
As low as $679.09/mo
View Details
Jet EVS-949 Mill with X, Y-Axis JET Powerfeeds and USA Made Air Draw Bar 894306 at Elite Metal Tools
Jet EVS-949 Mill with X, Y-Axis JET Powerfeeds and USA Made Air Draw Bar 894306
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $41,353.72
$32,727
As low as $647.66/mo
View Details
Jet CS-275, 275mm 1-Phase Ferrous Manual Cold Saw 414228 at Elite Metal Tools
Jet CS-275, 275mm 1-Phase Ferrous Manual Cold Saw 414228
  • 275mm (10") Ferrous Cold Saw for steel, stainless and tough to cut alloys
  • Blade drive reduction gearbox operates in an oil bath for increased durability
  • Flood coolant system with a 1-1/3 Gallon coolant reservoir and pump with flow control system extends blade life
  • Fully adjustable material depth stop for sawing repeatability and increased production
  • Hardened and ground direct drive worm shaft and bronze worm wheel transmits maximum torque to the saw blade
MSRP: $4,459.72
$3,599
As low as $116.96/mo
View Details
Jet JTM-4VS-1 Mill With X-Axis Powerfeed 690178 at Elite Metal Tools
Jet JTM-4VS-1 Mill With X-Axis Powerfeed 690178
  • Adjustable gibs throughout
  • Heavy duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $19,730.80
$15,518
As low as $307.10/mo
View Details

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.