JET

  • Layout
Jet EGH-1740, Elite 17x40 Large Spindle Bore Geared Head Lathe 892100 at Elite Metal Tools
Jet EGH-1740, Elite 17x40 Large Spindle Bore Geared Head Lathe 892100
  • 4-Position Carriage Stop
  • Anti-Float design eliminates backlash in the cross slide
  • Enclosed coolant system contains excess coolant for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Full Length Splash Guard
$43,598.57
$35,789.00
As low as $708/mo
View Details
Jet 15" JET Helical Cutterhead Planer, JWP-15BHH 722155 at Elite Metal Tools
Jet 15" JET Helical Cutterhead Planer, JWP-15BHH 722155
  • 4" Dust Port hooks up to dust management system and helps keep shop clean
  • Dual infeed speed control for 16fpm or 20fpm maximizes cut efficiency
  • Dust Port hooks up to dust management system and helps keep shop clean
  • Large hand wheel with positive gear drive easily moves the head to the desired board thickness
  • Magnetic Switch with green safety light illuminates when powered
$3,931.42
$3,199.99
As low as $103/mo
View Details
Jet IBG-8VS 8" Variable Speed Industrial Grinder 578208 at Elite Metal Tools
Jet IBG-8VS 8" Variable Speed Industrial Grinder 578208
  • Adjustable Cast Iron Tool Rest
  • Brake Resistor added for rapid wheel stoppage
  • Cast iron guards house the 36- and 60-grit wheels
  • CSA/CUS Certified
  • Large Eye Safety Shields
$831.43
$748.00
As low as $24/mo
View Details
Jet J-8201K, 14" Metal/Wood Vertical Bandsaw 414500 at Elite Metal Tools
Jet J-8201K, 14" Metal/Wood Vertical Bandsaw 414500
  • 14 TPI metal cutting blade included
  • 6 TPI wood cutting blade included
  • Adjustable table
  • Conveniently located on/off switch
  • Gear box design allows wood/metal model saws to be used for a wider variety of metal, wood, non-ferrous metal and plastic cutting applications
$2,782.86
$2,289.00
As low as $74/mo
View Details
Jet JTM-4VS-1 Variable Speed Vertical Milling Machine 115/230V 1Ph 690180 at Elite Metal Tools
Jet JTM-4VS-1 Variable Speed Vertical Milling Machine 115/230V 1Ph 690180
  • Adjustable gibs throughout
  • Heavy duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
$15,164.29
$12,299.00
As low as $399/mo
View Details
Jet Deluxe Xacta® SAW 3HP, 1Ph, 50" Rip 708675PK at Elite Metal Tools
Jet Deluxe Xacta® SAW 3HP, 1Ph, 50" Rip 708675PK
  • Deluxe miter gauge with adjustable positive stops and large soft grip handles provides large crosscutting capacity and accurate miters
  • Heavy-duty chrome plated handwheels contribute to smooth trunnion/arbor movement
  • Hinged motor cover on cabinet gives quick access to the motor and belts
  • Independent leaf safety guard protects operator from blade while cutting, even at 45° tilt
  • Left and right cast iron extension wings
$4,299.99
$3,499.99
As low as $113/mo
View Details
Jet 12" Xacta® Saw, 5HP 1PH - (JTAS-12-DX) 708546PK at Elite Metal Tools
Jet 12" Xacta® Saw, 5HP 1PH - (JTAS-12-DX) 708546PK
  • 40-1/2” fence provides greater stability and better support when ripping
  • 80” of solid cast iron provides a massive work surface
  • Collection shroud around the blade and integrated hose improve dust collection
  • External tool storage for the fence and miter gauge
  • Integrated arbor lock is accessed from table top for rapid blade change
$7,125.70
$5,799.99
As low as $188/mo
View Details
Jet HVBS-710G, 7" x 10-1/2" Horizontal/Vertical Mitering Geared Head Bandsaw 413452 at Elite Metal Tools
Jet HVBS-710G, 7" x 10-1/2" Horizontal/Vertical Mitering Geared Head Bandsaw 413452
  • Adjustable Material Stop
  • Built-in, self-propelled blade brush extends blade life
  • Fully adjustable hydraulic downfeed system
  • Hardened and ground drive shaft and worm gears transmit maximum torque to blade wheels
  • Heavy-duty cast iron saw bow and bed
$3,868.57
$3,149.00
As low as $102/mo
View Details
Jet HBS-916, 9" x 16" Horizontal Bandsaw 414468 at Elite Metal Tools
Jet HBS-916, 9" x 16" Horizontal Bandsaw 414468
  • Adjustable Material Stop
  • Blade guides feature parallel double-row ball bearing support
  • Built-in, self-propelled blade brush extends blade life
  • Carbide blade guides feature parallel double-row ball bearing support
  • Coolant is distributed through the blade guides
$6,345.10
$5,179.00
As low as $168/mo
View Details
Jet 13" JET Helical Style Bench Top Planer, JWP-13BT 722130 at Elite Metal Tools
Jet 13" JET Helical Style Bench Top Planer, JWP-13BT 722130
  • Adjustable depth stop for consistent repetitive cuts
  • Adjustable folding infeed/outfeed tables for leveling to bed and saves shop space when stored
  • Dual infeed speed control for 18fpm or 26fpm maximizes cut efficiency on different wood material types
  • Dust Port hooks up to dust management system and helps keep shop clean
  • Maximum depth of cut 1/8", 6" depth and 13" width capacity
$1,105.70
$949.00
As low as $30/mo
View Details
Jet JMD-18 Mill/Drill With NEWALL DP700 DRO 350126 at Elite Metal Tools
Jet JMD-18 Mill/Drill With NEWALL DP700 DRO 350126
  • 1/2” Drill chuck, chuck arbor
  • 360° head swivel
  • Adjustable carbide facemill
  • Base taper allows for easier clean up
  • Easy to read internal depth gauge
$7,582.03
$6,179.00
As low as $200/mo
View Details
Jet JWL-1440VSK 14" x 40" Wood Lathe with Legs 719400K at Elite Metal Tools
Jet JWL-1440VSK 14" x 40" Wood Lathe with Legs 719400K
  • Acme thread in Tailstock
  • CSA Certified
  • Easy-to-read RPM display
  • Headstock slides for maximum versatility
  • Improved tailstock quill locking with anti-rotation key
$2,948.56
$2,399.99
As low as $77/mo
View Details
Jet IBG-8VSB 8" Variable Speed Industrial Buffer 578218 at Elite Metal Tools
Jet IBG-8VSB 8" Variable Speed Industrial Buffer 578218
  • Brake Resistor added for rapid wheel stoppage
  • CSA/CUS Certified
  • Totally enclosed, pre-lubricated ball bearings
  • Variable speed provides wide range of RPMs
  • *LED Work Lamp shown not included
$652.86
$589.00
As low as $19/mo
View Details
Jet OES-80CS Oscillating 6" x 89" Belt Edge Sander 708447 at Elite Metal Tools
Jet OES-80CS Oscillating 6" x 89" Belt Edge Sander 708447
  • 4" dust port hooks up to your dust collection system for efficient dust removal
  • Adjustable outer drum support table enables contour sanding
  • Belt platen is made from precision-ground steel plate for strength and durability
  • Cast iron table moves up or down to provide exact workpiece positioning
  • Graphite covered platen runs cooler increasing machine and belt life
$1,842.84
$1,499.99
As low as $48/mo
View Details
Jet IAFS-3000 3000 CFM Industrial Air Filtration System 1HP, 230V, Single Phase 415150 at Elite Metal Tools
Jet IAFS-3000 3000 CFM Industrial Air Filtration System 1HP, 230V, Single Phase 415150
  • Constructed of metal for years of use
  • Helps to extended the service life of the air conditioning equipment in the shop
  • Filters dust, smoke and oil mist in a closed or air conditioned workshop
  • Fully enclosed ball bearing motor with overload protection for long, dependable service
  • Metalworking-specific outer filter that attracts more oil mist, smoke and dust generated during the metal processing, which could effect the health of the machinist, especially in closed areas of the workshop
$2,920.00
$2,429.00
As low as $78/mo
View Details
Jet JTM-1050EVS2/230 Mill With 3-Axis Acu-Rite 303 DRO (Knee) With X, Y and Z-Axis Powerfeeds and Air Powered Draw Bar 690680 at Elite Metal Tools
Jet JTM-1050EVS2/230 Mill With 3-Axis Acu-Rite 303 DRO (Knee) With X, Y and Z-Axis Powerfeeds and Air Powered Draw Bar 690680
  • Automatic oiler releases 3 to 6 cc/cy of lubrication at adjustable time intervals
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
$34,425.67
$27,799.00
As low as $550/mo
View Details
Jet JTM-4VS Mill With 3-Axis ACU-RITE G-2 MILLPWR CNC 690948 at Elite Metal Tools
Jet JTM-4VS Mill With 3-Axis ACU-RITE G-2 MILLPWR CNC 690948
  • 12.1" High resolution display (1024 x 768) with 3D graphics
  • Available offline software
  • Built-in calculator: Performs standard, trig, and geometry calculations and transfers them directly into part programs
  • Closed loop feedback using Acu-Rite precision linear encoders with 0.00005" resolution
  • Estimated run time feature
$52,827.34
$42,999.00
As low as $850/mo
View Details
Jet JWS-35X3-1 Shaper 3HP, 1Ph 708323 at Elite Metal Tools
Jet JWS-35X3-1 Shaper 3HP, 1Ph 708323
  • 4" Dust port built into fence for convenient hookup to any dust collection system
  • Extra-large chrome handwheel is conveniently located for fast, easy, and accurate spindle height adjustments
  • Extruded aluminum fence comes with T-Slots and 2 feather board hold-downs
  • Four RPM speeds (4000, 6000, 8000, 10000) let you select the best speed and torque for different cutter diameters
  • Large 26-3/4” x 32-1/4” precision-ground cast iron table provides a durable work area and is predrilled for power feeder
$4,422.85
$3,599.99
As low as $116/mo
View Details
Jet JWDS-2244OSC Oscillating Drum Sander With Closed Stand 723544OSCK at Elite Metal Tools
Jet JWDS-2244OSC Oscillating Drum Sander With Closed Stand 723544OSCK
  • Self-Cooling Drum
  • Exclusive variable speed oscillating drum moves from left to right—minimizing visual scratch patterns in workpieces and increasing the lifespan of abrasive paper
  • Infinitely variable speed control of up to 10 feet per minute allows the user to choose the optimal feed rate
  • Mobile cabinet features a heavy duty 45" x 24" footprint to increase stability and has a door to keep items stored securely
  • One rotation of the top-position hand wheel adjusts the drum height by 1/16"
$3,808.56
$3,099.99
As low as $100/mo
View Details
Jet JMD-45GH Geared Head Square Column Mill/Drill 351045 at Elite Metal Tools
Jet JMD-45GH Geared Head Square Column Mill/Drill 351045
  • Calibrated fine down feed built in
  • CSA/CUS Certified
  • Easy to read internal depth gauge
  • Full power to the cutting tools through 6 speed geared head
  • Heavy-duty design allows for a variety of precision drilling applications
$8,611.20
$6,949.00
As low as $225/mo
View Details
Jet 14" Closed Stand Bandsaw, 1HP, 1Ph, 115/230V 708115K at Elite Metal Tools
Jet 14" Closed Stand Bandsaw, 1HP, 1Ph, 115/230V 708115K
  • 3/8", 6 TPI woodworking blade is included so you can start cutting right away
  • 6-spoke, precision computer balanced wheels eliminate vibration for accurate blade tracking
  • 6" depth resaw capacity for cutting larger pieces of wood
  • Micro-adjustable lower blade guide reduces set up time and makes adjustments easier
  • Single knob tracking adjustment simplifies the blade tracking process
$1,597.13
$1,335.00
As low as $43/mo
View Details
Jet JWL-1221VS 12'' x 21'' Variable Speed Wood Lathe 719200 at Elite Metal Tools
Jet JWL-1221VS 12'' x 21'' Variable Speed Wood Lathe 719200
  • 24 integrated indexing positions
  • Acme thread in Tailstock
  • Conveniently located controls and DRO
  • Forward to reverse is a smooth transition
  • Innovative ratchet style belt tension system (patent pending)
$1,228.56
$1,067.00
As low as $34/mo
View Details
Jet JWDS-2550 Drum Sander With Closed Stand 723544CSK at Elite Metal Tools
Jet JWDS-2550 Drum Sander With Closed Stand 723544CSK
  • Self-Cooling Drum
$3,317.13
$2,699.99
As low as $87/mo
View Details
Jet HVBS-10 DMW 10” Horizontal/Vertical Dual Mitering Portable Band Saw , 1HP, 115V, 1 Ph 424463 at Elite Metal Tools
Jet HVBS-10 DMW 10” Horizontal/Vertical Dual Mitering Portable Band Saw , 1HP, 115V, 1 Ph 424463
  • Adjustable vise
  • Automatic shut off switch stops the sawing process
  • Blade is fully guarded for Operator safety
  • Built-in, self-propelled blade brush prevents chip build up in blade guides
  • Head is pressure controlled by a hydraulic cylinder
$5,014.29
$4,099.00
As low as $133/mo
View Details

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.