JET

  • Layout
Jet IAFS-3000 3000 CFM Industrial Air Filtration System 1HP, 230V, Single Phase 415150 at Elite Metal Tools
Jet IAFS-3000 3000 CFM Industrial Air Filtration System 1HP, 230V, Single Phase 415150
  • Constructed of metal for years of use
  • Helps to extended the service life of the air conditioning equipment in the shop
  • Filters dust, smoke and oil mist in a closed or air conditioned workshop
  • Fully enclosed ball bearing motor with overload protection for long, dependable service
  • Metalworking-specific outer filter that attracts more oil mist, smoke and dust generated during the metal processing, which could effect the health of the machinist, especially in closed areas of the workshop
MSRP: $2,920
$2,429
As low as $78.94/mo
View Details
Jet E-1440VS, Elite 14x40 EVS Lathe 892030 at Elite Metal Tools
Jet E-1440VS, Elite 14x40 EVS Lathe 892030
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Inverter drive system provides infinitely variable spindle speeds
MSRP: $24,775.71
$20,239
As low as $400.52/mo
View Details
Jet EGH-1740, Elite 17x40 Large Spindle Bore Geared Head Lathe 892100 at Elite Metal Tools
Jet EGH-1740, Elite 17x40 Large Spindle Bore Geared Head Lathe 892100
  • 4-Position Carriage Stop
  • Anti-Float design eliminates backlash in the cross slide
  • Enclosed coolant system contains excess coolant for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Full Length Splash Guard
MSRP: $43,598.57
$35,789
As low as $708.26/mo
View Details
Jet EGH-1740 With ACU-RITE 203 DRO With Taper Attachment and Collet Closer 892506 at Elite Metal Tools
Jet EGH-1740 With ACU-RITE 203 DRO With Taper Attachment and Collet Closer 892506
  • 4-Position Carriage Stop
  • Anti-Float design eliminates backlash in the cross slide
  • Enclosed coolant system contains excess coolant for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Full Length Splash Guard
MSRP: $59,517.71
$48,629
As low as $962.36/mo
View Details
Jet EGH-1740 With Collet Closer 892501 at Elite Metal Tools
Jet EGH-1740 With Collet Closer 892501
  • 4-Position Carriage Stop
  • Anti-Float design eliminates backlash in the cross slide
  • Enclosed coolant system contains excess coolant for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Full Length Splash Guard
MSRP: $46,828.57
$38,349
As low as $758.92/mo
View Details
Jet AFS-2000, 1700CFM Air Filtration System, 3-Speed, with Remote Control 708615 at Elite Metal Tools
Jet AFS-2000, 1700CFM Air Filtration System, 3-Speed, with Remote Control 708615
  • Adjustable Exhaust directs the air where you want it for optimal circulation
  • Disposable Electrostatic Outer Filter attracts more dust particles than standard filters
  • Electrostatic Outer Filter
  • Four eye bolts let you hang unit from shop ceiling; all hardware included
  • Fully enclosed ball bearing motor with overload protection for long, dependable service
MSRP: $982.84
$859
As low as $27.91/mo
View Details
Jet IAFS-2400 2400 CFM Industrial Air Filtration System 3/4HP, 115V, Single Phase 415125 at Elite Metal Tools
Jet IAFS-2400 2400 CFM Industrial Air Filtration System 3/4HP, 115V, Single Phase 415125
  • Constructed of metal for years of use
  • Helps to extended the service life of the air conditioning equipment in the shop
  • Filters dust, smoke and oil mist in a closed or air conditioned workshop
  • Fully enclosed ball bearing motor with overload protection for long, dependable service
  • Adjustable Exhaust directs the air where you want it for optimal circulation
MSRP: $2,248.57
$1,849
As low as $60.09/mo
View Details
Jet EGH-1740 With ACU-RITE 303 DRO With Taper Attachment and Collet Closer 892510 at Elite Metal Tools
Jet EGH-1740 With ACU-RITE 303 DRO With Taper Attachment and Collet Closer 892510
  • 4-Position Carriage Stop
  • Anti-Float design eliminates backlash in the cross slide
  • Enclosed coolant system contains excess coolant for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Full Length Splash Guard
MSRP: $57,907.14
$47,269
As low as $935.45/mo
View Details
Jet E-1236VS, Elite 12x36 EVS Lathe 892000 at Elite Metal Tools
Jet E-1236VS, Elite 12x36 EVS Lathe 892000
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Integrated locking tool cabinet in stand on 12" Lathe
MSRP: $19,522.86
$15,899
As low as $314.64/mo
View Details
Jet EGH-1740 With ACU-RITE 203 DRO 892503 at Elite Metal Tools
Jet EGH-1740 With ACU-RITE 203 DRO 892503
  • 4-Position Carriage Stop
  • Anti-Float design eliminates backlash in the cross slide
  • Enclosed coolant system contains excess coolant for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Full Length Splash Guard
MSRP: $49,561.43
$40,559
As low as $802.66/mo
View Details
Jet EGH-1740 With ACU-RITE 203 DRO With Collet Closer 892505 at Elite Metal Tools
Jet EGH-1740 With ACU-RITE 203 DRO With Collet Closer 892505
  • 4-Position Carriage Stop
  • Anti-Float design eliminates backlash in the cross slide
  • Enclosed coolant system contains excess coolant for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Full Length Splash Guard
MSRP: $53,045.71
$43,399
As low as $858.86/mo
View Details
Jet EVS-949 Mill with 2-Axis ACU-RITE 303 DRO 894330 at Elite Metal Tools
Jet EVS-949 Mill with 2-Axis ACU-RITE 303 DRO 894330
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $34,337.14
$27,949
As low as $553.11/mo
View Details
Jet IAFS-1700 1700 CFM Industrial Air Filtration System 1/3HP, 115V, Single Phase 415100 at Elite Metal Tools
Jet IAFS-1700 1700 CFM Industrial Air Filtration System 1/3HP, 115V, Single Phase 415100
  • Constructed of metal for years of use
  • Helps to extended the service life of the air conditioning equipment in the shop
  • Filters dust, smoke and oil mist in a closed or air conditioned workshop
  • Fully enclosed ball bearing motor with overload protection for long, dependable service
  • Adjustable Exhaust directs the air where you want it for optimal circulation
MSRP: $1,696.69
$1,429
As low as $46.44/mo
View Details
Jet EGH-1740 With Newall DP700 DRO With Taper Attachment and Collet Closer 892514 at Elite Metal Tools
Jet EGH-1740 With Newall DP700 DRO With Taper Attachment and Collet Closer 892514
  • 4-Position Carriage Stop
  • Anti-Float design eliminates backlash in the cross slide
  • Enclosed coolant system contains excess coolant for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Full Length Splash Guard
MSRP: $59,170.06
$48,459
As low as $959.00/mo
View Details
Jet EVS-949 Mill with 3-Axis ACU-RITE 303 (Knee) DRO 894344 at Elite Metal Tools
Jet EVS-949 Mill with 3-Axis ACU-RITE 303 (Knee) DRO 894344
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $35,983.43
$29,289
As low as $579.62/mo
View Details
Jet EGH-1740 With ACU-RITE 203 DRO With Taper Attachment 892504 at Elite Metal Tools
Jet EGH-1740 With ACU-RITE 203 DRO With Taper Attachment 892504
  • 4-Position Carriage Stop
  • Anti-Float design eliminates backlash in the cross slide
  • Enclosed coolant system contains excess coolant for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Full Length Splash Guard
MSRP: $56,081.26
$45,759
As low as $905.57/mo
View Details
Jet EGH-1740 With ACU-RITE 303 DRO 892507 at Elite Metal Tools
Jet EGH-1740 With ACU-RITE 303 DRO 892507
  • 4-Position Carriage Stop
  • Anti-Float design eliminates backlash in the cross slide
  • Enclosed coolant system contains excess coolant for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Full Length Splash Guard
MSRP: $50,274.29
$41,199
As low as $815.32/mo
View Details
Jet EVS-949 Mill with 3-Axis ACU-RITE 303 (Knee) DRO and X, Y-Axis JET Powerfeeds 894347 at Elite Metal Tools
Jet EVS-949 Mill with 3-Axis ACU-RITE 303 (Knee) DRO and X, Y-Axis JET Powerfeeds 894347
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $39,374.29
$32,049
As low as $634.24/mo
View Details
Jet EVS-949 Mill with 3-Axis ACU-RITE 303 (Quill) DRO 894337 at Elite Metal Tools
Jet EVS-949 Mill with 3-Axis ACU-RITE 303 (Quill) DRO 894337
  • Patented vari-disc key provides up to 10 times the wear resistance than aluminum or brass keys
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
MSRP: $35,995.71
$29,299
As low as $579.82/mo
View Details
Jet EVS-949 Mill with 3-Axis ACU-RITE 203 (Knee) DRO 894323 at Elite Metal Tools
Jet EVS-949 Mill with 3-Axis ACU-RITE 203 (Knee) DRO 894323
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $35,221.71
$28,669
As low as $567.35/mo
View Details
Jet E-1340VS, Elite 13x40 EVS Lathe 892020 at Elite Metal Tools
Jet E-1340VS, Elite 13x40 EVS Lathe 892020
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Inverter drive system provides infinitely variable spindle speeds
MSRP: $23,855.91
$19,266.78
As low as $381.28/mo
View Details
Jet EVS-1440B Electronic Variable Speed Bench Lathe, 3HP 311440 at Elite Metal Tools
Jet EVS-1440B Electronic Variable Speed Bench Lathe, 3HP 311440
  • Standard Equipment
  • 6" 3-Jaw Chuck
  • Threading Dial Indictor
  • Steady & Follow Rest
  • LED Work Lamp
MSRP: $19,803.99
$16,099
As low as $318.59/mo
View Details
Jet EGH-1740 With Taper Attacment 892500 at Elite Metal Tools
Jet EGH-1740 With Taper Attacment 892500
  • 4-Position Carriage Stop
  • Anti-Float design eliminates backlash in the cross slide
  • Enclosed coolant system contains excess coolant for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Full Length Splash Guard
MSRP: $47,717.14
$38,999
As low as $771.79/mo
View Details
Jet 5C Lever Type Collet Closer For ELITE E-1340 and E-1440 Lathes 892036 at Elite Metal Tools
Jet 5C Lever Type Collet Closer For ELITE E-1340 and E-1440 Lathes 892036
  • Precision ground components
  • Rear mounted lever action
  • Some drilling and other modifications may be required for installation
  • Specifically designed for Elite E-1340VS and E-1440VS Lathes
MSRP: $2,818.57
$2,299
As low as $74.71/mo
View Details

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.