JET

  • Layout
Jet JCDC-3 Cyclone Dust Collector Kit, 3HP, 230V 717530K at Elite Metal Tools
Jet JCDC-3 Cyclone Dust Collector Kit, 3HP, 230V 717530K
  • Direct mounted filter eliminates inefficiencies from ridged flex hosing and bends
  • Double paddle manual cleaning system quickly cleans the pleated filter
  • Fine dust particles are filtered through pleated material that captures even the smallest particles down to 1 micron and below
  • Heavy debris is captured in a 66 gallon drum with quick release levers and independent casters for quick emptying
  • Heavy debris is pulled down to collection drum before debris stream reaches the filter, providing constant suction
MSRP: $3,071.42
$2,499.99
As low as $81.24/mo
View Details
Jet E-1440VS, Elite 14x40 EVS Lathe 892030 at Elite Metal Tools
Jet E-1440VS, Elite 14x40 EVS Lathe 892030
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Inverter drive system provides infinitely variable spindle speeds
MSRP: $24,775.71
$20,239
As low as $400.52/mo
View Details
Jet EGH-1740, Elite 17x40 Large Spindle Bore Geared Head Lathe 892100 at Elite Metal Tools
Jet EGH-1740, Elite 17x40 Large Spindle Bore Geared Head Lathe 892100
  • 4-Position Carriage Stop
  • Anti-Float design eliminates backlash in the cross slide
  • Enclosed coolant system contains excess coolant for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Full Length Splash Guard
MSRP: $43,598.57
$35,789
As low as $708.26/mo
View Details
Jet EGH-1740 With ACU-RITE 203 DRO With Taper Attachment and Collet Closer 892506 at Elite Metal Tools
Jet EGH-1740 With ACU-RITE 203 DRO With Taper Attachment and Collet Closer 892506
  • 4-Position Carriage Stop
  • Anti-Float design eliminates backlash in the cross slide
  • Enclosed coolant system contains excess coolant for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Full Length Splash Guard
MSRP: $59,517.71
$48,629
As low as $962.36/mo
View Details
Jet EGH-1740 With Collet Closer 892501 at Elite Metal Tools
Jet EGH-1740 With Collet Closer 892501
  • 4-Position Carriage Stop
  • Anti-Float design eliminates backlash in the cross slide
  • Enclosed coolant system contains excess coolant for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Full Length Splash Guard
MSRP: $46,828.57
$38,349
As low as $758.92/mo
View Details
Jet AFS-2000, 1700CFM Air Filtration System, 3-Speed, with Remote Control 708615 at Elite Metal Tools
Jet AFS-2000, 1700CFM Air Filtration System, 3-Speed, with Remote Control 708615
  • Adjustable Exhaust directs the air where you want it for optimal circulation
  • Disposable Electrostatic Outer Filter attracts more dust particles than standard filters
  • Electrostatic Outer Filter
  • Four eye bolts let you hang unit from shop ceiling; all hardware included
  • Fully enclosed ball bearing motor with overload protection for long, dependable service
MSRP: $982.84
$859
As low as $27.91/mo
View Details
Jet DC-1100VX-CK Dust Collector, 1.5HP 1PH 115/230V, 2-Micron Canister Kit 708659K at Elite Metal Tools
Jet DC-1100VX-CK Dust Collector, 1.5HP 1PH 115/230V, 2-Micron Canister Kit 708659K
  • Eliminates premature filter clogging for sustained performance
  • High air velocity (CFM) design stands up to any competitive specifications
  • Includes four casters for maneuverability and total portability
  • Industrial controls designed for years of trouble-free use
  • Permanently lubricated, totally enclosed, fan-cooled motors are rated for continuous-duty
MSRP: $1,044.27
$899
As low as $29.21/mo
View Details
Jet JCDC-2 Cyclone Dust Collector, 2HP, 230V 717520 at Elite Metal Tools
Jet JCDC-2 Cyclone Dust Collector, 2HP, 230V 717520
  • Direct mounted filter eliminates inefficiencies from ridged flex hosing and bends
  • Double paddle manual cleaning system quickly cleans the pleated filter
  • Fine dust particles are filtered through pleated material that captures even the smallest particles down to 1 micron and below
  • Heavy debris is captured in a 30 gallon drum with quick release levers and independent casters for quick emptying
  • Heavy debris is pulled down to collection drum before debris stream reaches the filter, providing constant suction
MSRP: $2,579.99
$2,099.99
As low as $68.24/mo
View Details
Jet JCDC-1.5 Cyclone Dust Collector, 1.5HP, 115V 717515 at Elite Metal Tools
Jet JCDC-1.5 Cyclone Dust Collector, 1.5HP, 115V 717515
  • Direct mounted filter eliminates inefficiencies from ridged flex hosing and bends
  • Double paddle manual cleaning system quickly cleans the pleated filter
  • Fine dust particles are filtered through pleated material that captures even the smallest particles down to 1 micron and below
  • Heavy debris is captured in 20 gallon drum with quick release levers and independent casters for quick emptying
  • Heavy debris is pulled down to collection drum before debris stream reaches the filter, providing constant suction
MSRP: $1,965.70
$1,599.99
As low as $51.99/mo
View Details
Jet EGH-1740 With ACU-RITE 303 DRO With Taper Attachment and Collet Closer 892510 at Elite Metal Tools
Jet EGH-1740 With ACU-RITE 303 DRO With Taper Attachment and Collet Closer 892510
  • 4-Position Carriage Stop
  • Anti-Float design eliminates backlash in the cross slide
  • Enclosed coolant system contains excess coolant for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Full Length Splash Guard
MSRP: $57,907.14
$47,269
As low as $935.45/mo
View Details
Jet E-1236VS, Elite 12x36 EVS Lathe 892000 at Elite Metal Tools
Jet E-1236VS, Elite 12x36 EVS Lathe 892000
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Integrated locking tool cabinet in stand on 12" Lathe
MSRP: $19,522.86
$15,899
As low as $314.64/mo
View Details
Jet Air Filtration 1000CFM | AFS-1000C 713000 at Elite Metal Tools
Jet Air Filtration 1000CFM | AFS-1000C 713000
  • Automatic air quality sensor adjusts the six speeds based on air quality.
  • Captures particles down to 1 micron.
  • Timer can be set up to 16 hours.
  • Bright, clear, LED display panel is angled for easier viewing when ceiling mounted.
  • Two-Filter system with air Diffuser disperses air into a broader pattern.
MSRP: $675.70
$606
As low as $19.69/mo
View Details
Jet DC-650 1HP Dust Collector with 30 Micron Filter Bags 708642BK at Elite Metal Tools
Jet DC-650 1HP Dust Collector with 30 Micron Filter Bags 708642BK
  • Hook up one to three machines for optimum dust cleaning
  • Includes four casters for maneuverability and total portability
  • Permanently lubricated, totally enclosed, fan-cooled motors are rated for continuous-duty
  • Quick-install collection bag makes emptying and re-attaching a snap
  • Single-stage design for economical and quiet operation
MSRP: $614.27
$561
As low as $18.23/mo
View Details
Jet EGH-1740 With ACU-RITE 203 DRO 892503 at Elite Metal Tools
Jet EGH-1740 With ACU-RITE 203 DRO 892503
  • 4-Position Carriage Stop
  • Anti-Float design eliminates backlash in the cross slide
  • Enclosed coolant system contains excess coolant for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Full Length Splash Guard
MSRP: $49,561.43
$40,559
As low as $802.66/mo
View Details
Jet EGH-1740 With ACU-RITE 203 DRO With Collet Closer 892505 at Elite Metal Tools
Jet EGH-1740 With ACU-RITE 203 DRO With Collet Closer 892505
  • 4-Position Carriage Stop
  • Anti-Float design eliminates backlash in the cross slide
  • Enclosed coolant system contains excess coolant for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Full Length Splash Guard
MSRP: $53,045.71
$43,399
As low as $858.86/mo
View Details
Jet EVS-949 Mill with 2-Axis ACU-RITE 303 DRO 894330 at Elite Metal Tools
Jet EVS-949 Mill with 2-Axis ACU-RITE 303 DRO 894330
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $34,337.14
$27,949
As low as $553.11/mo
View Details
Jet EGH-1740 With Newall DP700 DRO With Taper Attachment and Collet Closer 892514 at Elite Metal Tools
Jet EGH-1740 With Newall DP700 DRO With Taper Attachment and Collet Closer 892514
  • 4-Position Carriage Stop
  • Anti-Float design eliminates backlash in the cross slide
  • Enclosed coolant system contains excess coolant for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Full Length Splash Guard
MSRP: $59,170.06
$48,459
As low as $959.00/mo
View Details
Jet Dust Collector, 1.5HP 1PH 115/230V, 5-Micron Bag Filter Kit | DC-1100VX-5M 708658K at Elite Metal Tools
Jet Dust Collector, 1.5HP 1PH 115/230V, 5-Micron Bag Filter Kit | DC-1100VX-5M 708658K
  • Eliminates premature filter clogging for sustained performance
  • High air velocity (CFM) design stands up to any competitive specifications
  • Includes four casters for maneuverability and total portability
  • Industrial controls designed for years of trouble-free use
  • Permanently lubricated, totally enclosed, fan-cooled motors are rated for continuous-duty
MSRP: $798.56
$719
As low as $23.36/mo
View Details
Jet EVS-949 Mill with 3-Axis ACU-RITE 303 (Knee) DRO 894344 at Elite Metal Tools
Jet EVS-949 Mill with 3-Axis ACU-RITE 303 (Knee) DRO 894344
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $35,983.43
$29,289
As low as $579.62/mo
View Details
Jet EGH-1740 With ACU-RITE 203 DRO With Taper Attachment 892504 at Elite Metal Tools
Jet EGH-1740 With ACU-RITE 203 DRO With Taper Attachment 892504
  • 4-Position Carriage Stop
  • Anti-Float design eliminates backlash in the cross slide
  • Enclosed coolant system contains excess coolant for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Full Length Splash Guard
MSRP: $56,081.26
$45,759
As low as $905.57/mo
View Details
Jet EGH-1740 With ACU-RITE 303 DRO 892507 at Elite Metal Tools
Jet EGH-1740 With ACU-RITE 303 DRO 892507
  • 4-Position Carriage Stop
  • Anti-Float design eliminates backlash in the cross slide
  • Enclosed coolant system contains excess coolant for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Full Length Splash Guard
MSRP: $50,274.29
$41,199
As low as $815.32/mo
View Details
Jet EVS-949 Mill with 3-Axis ACU-RITE 303 (Knee) DRO and X, Y-Axis JET Powerfeeds 894347 at Elite Metal Tools
Jet EVS-949 Mill with 3-Axis ACU-RITE 303 (Knee) DRO and X, Y-Axis JET Powerfeeds 894347
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $39,374.29
$32,049
As low as $634.24/mo
View Details
Jet EVS-949 Mill with 3-Axis ACU-RITE 303 (Quill) DRO 894337 at Elite Metal Tools
Jet EVS-949 Mill with 3-Axis ACU-RITE 303 (Quill) DRO 894337
  • Patented vari-disc key provides up to 10 times the wear resistance than aluminum or brass keys
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
MSRP: $35,995.71
$29,299
As low as $579.82/mo
View Details
Jet DC-1100VX-BK Dust Collector, 1.5HP 1PH 115/230V, 30-Micron Bag Filter Kit 708657K at Elite Metal Tools
Jet DC-1100VX-BK Dust Collector, 1.5HP 1PH 115/230V, 30-Micron Bag Filter Kit 708657K
  • Eliminates premature filter clogging for sustained performance
  • High air velocity (CFM) design stands up to any competitive specifications
  • Industrial controls designed for years of trouble-free use
  • Permanently lubricated, totally enclosed, fan-cooled motors are rated for continuous-duty
  • Quick-connect collection bags with elastic band for fast, easy installation and removal
MSRP: $737.13
$659
As low as $21.41/mo
View Details

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.