JET

  • Layout
Jet 5C Lever Type Collet Closer For ELITE E-1340 and E-1440 Lathes 892036 at Elite Metal Tools
Jet 5C Lever Type Collet Closer For ELITE E-1340 and E-1440 Lathes 892036
  • Precision ground components
  • Rear mounted lever action
  • Some drilling and other modifications may be required for installation
  • Specifically designed for Elite E-1340VS and E-1440VS Lathes
MSRP: $3,513.72
$2,835
As low as $92.13/mo
View Details
Jet 5-Ton Two Speed Electric Chain Hoist 3-Phase 20' Lift | TS500-460-020 144015 at Elite Metal Tools
Jet 5-Ton Two Speed Electric Chain Hoist 3-Phase 20' Lift | TS500-460-020 144015
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
MSRP: $20,265.29
$11,363
As low as $369.29/mo
View Details
Jet 1-Ton Electric Chain Hoist 1-Phase 20' Lift | BLVS100-020 104035 at Elite Metal Tools
Jet 1-Ton Electric Chain Hoist 1-Phase 20' Lift | BLVS100-020 104035
  • Comes standard with Wireless Controller that can infinitely adjust speed from creep to 4ft/min with speed dial and max of 41ft/min in high speed
  • TAA Approved
  • Single phase 120V plug enables use in all areas and the Permanent Magnet Brushless Motor has the lowest required starting current available at just 10amp.
  • Overload protection using slip clutch system to protect hoist from loads over rated capacities
  • DC Brushless motor designed for a longer lifespan than normal Electric Hoist motors reducing maintenance costs
MSRP: $13,302.29
$7,568
As low as $245.96/mo
View Details
Jet 2-Ton Electric Chain Hoist 1-Phase 20' Lift | BLVS200-020 104046 at Elite Metal Tools
Jet 2-Ton Electric Chain Hoist 1-Phase 20' Lift | BLVS200-020 104046
  • Comes standard with Wireless Controller that can infinitely adjust speed from creep to 4ft/min with speed dial and max of 41ft/min in high speed
  • TAA Approved
  • Single phase 120V plug enables use in all areas and the Permanent Magnet Brushless Motor has the lowest required starting current available at just 10amp.
  • Overload protection using slip clutch system to protect hoist from loads over rated capacities
  • DC Brushless motor designed for a longer lifespan than normal Electric Hoist motors reducing maintenance costs
MSRP: $15,551.79
$8,748
As low as $284.31/mo
View Details
Jet 12" 4-Jaw Chuck D1-6 For Elite 17" Geared Head Lathes 892158 at Elite Metal Tools
Jet 12" 4-Jaw Chuck D1-6 For Elite 17" Geared Head Lathes 892158
  • 4 independent one-piece jaws
  • Cast iron construction
  • Specifically designed for Elite EGH-1740 and EGH-1760 lathes
MSRP: $2,256.86
$1,850
As low as $60.12/mo
View Details
Jet 5C Lever Type Collet Closer For ELITE E-1236VS Lathe 892006 at Elite Metal Tools
Jet 5C Lever Type Collet Closer For ELITE E-1236VS Lathe 892006
  • Precision ground components
  • Rear mounted lever action
  • Some drilling and other modifications may be required for installation
  • Specifically designed for Elite E-1236VS Lathes
MSRP: $3,783.99
$3,034
As low as $98.60/mo
View Details
Jet 2-Ton Electric Chain Hoist 1-Phase 10' Lift | BLVS200-010 104044 at Elite Metal Tools
Jet 2-Ton Electric Chain Hoist 1-Phase 10' Lift | BLVS200-010 104044
  • Comes standard with Wireless Controller that can infinitely adjust speed from creep to 4ft/min with speed dial and max of 41ft/min in high speed
  • TAA Approved
  • Single phase 120V plug enables use in all areas and the Permanent Magnet Brushless Motor has the lowest required starting current available at just 10amp.
  • Overload protection using slip clutch system to protect hoist from loads over rated capacities
  • DC Brushless motor designed for a longer lifespan than normal Electric Hoist motors reducing maintenance costs
MSRP: $14,479.29
$8,186
As low as $266.04/mo
View Details
Jet JET — Replacement Bimetal Band Saw Blade, 1" X .035" X 128-1/2" (4/6T) for EHB-916V 891095 at Elite Metal Tools
Jet JET — Replacement Bimetal Band Saw Blade, 1" X .035" X 128-1/2" (4/6T) for EHB-916V 891095
  • Bimetal
  • 4/6T
  • 1" X .035" X 128-1/2"
MSRP: $245.95
$237
View Details
Jet JET — Infeed Table for MBS-1323EVS 891171 at Elite Metal Tools
Jet JET — Infeed Table for MBS-1323EVS 891171
  • 18 f/min. maximum transfer speed
  • 11" distance between rollers
  • Six rollers
  • 50-300 SFPM Variable Speed
  • 7716 lb Capacity load
MSRP: $7,230.07
$5,707
As low as $185.47/mo
View Details
Jet 8" 4-Jaw Chuck D1-4 For Elite EVS Lathes 892058 at Elite Metal Tools
Jet 8" 4-Jaw Chuck D1-4 For Elite EVS Lathes 892058
  • 4 independent one-piece jaws
  • Cast iron construction
  • Specifically designed for Elite EVS Lathes
MSRP: $1,756.80
$1,482
As low as $48.16/mo
View Details
Jet 1/2-Ton Electric Chain Hoist 1-Phase 20' Lift | BLVS050-020 104024 at Elite Metal Tools
Jet 1/2-Ton Electric Chain Hoist 1-Phase 20' Lift | BLVS050-020 104024
  • Comes standard with Wireless Controller that can infinitely adjust speed from creep to 4ft/min with speed dial and max of 41ft/min in high speed
  • TAA Approved
  • Single phase 120V plug enables use in all areas and the Permanent Magnet Brushless Motor has the lowest required starting current available at just 10amp.
  • Overload protection using slip clutch system to protect hoist from loads over rated capacities
  • DC Brushless motor designed for a longer lifespan than normal Electric Hoist motors reducing maintenance costs
MSRP: $7,791.29
$4,484
As low as $145.73/mo
View Details
Jet 1-Ton Electric Chain Hoist 1-Phase 10' Lift | BLVS100-010 104033 at Elite Metal Tools
Jet 1-Ton Electric Chain Hoist 1-Phase 10' Lift | BLVS100-010 104033
  • Comes standard with Wireless Controller that can infinitely adjust speed from creep to 4ft/min with speed dial and max of 41ft/min in high speed
  • TAA Approved
  • Single phase 120V plug enables use in all areas and the Permanent Magnet Brushless Motor has the lowest required starting current available at just 10amp.
  • Overload protection using slip clutch system to protect hoist from loads over rated capacities
  • DC Brushless motor designed for a longer lifespan than normal Electric Hoist motors reducing maintenance costs
MSRP: $13,499.19
$7,671
As low as $249.30/mo
View Details
Jet JET — 13GH/BD Taper Attachment for 13 x 40 A Lathes 321442 at Elite Metal Tools
Jet JET — 13GH/BD Taper Attachment for 13 x 40 A Lathes 321442
  • 10° Inclusive cutting capacity
  • Mounts to predrilled and tapped holes
MSRP: $4,459.72
$3,615
As low as $117.48/mo
View Details
Jet JET — Collet Closer 5C for GHB Series Lathes 321514A at Elite Metal Tools
Jet JET — Collet Closer 5C for GHB Series Lathes 321514A
  • Precision ground components
  • Rear mounted lever action
  • Specially designed for each model
  • Uses 5C collets
MSRP: $5,135.45
$4,168
As low as $135.46/mo
View Details
Jet JET — CBS-1340 Cabinet Stand for 13" x 40" Lathes 321443AK at Elite Metal Tools
Jet JET — CBS-1340 Cabinet Stand for 13" x 40" Lathes 321443AK
  • All steel construction
  • Two large cabinets with hinged locking locks to store supplies
  • Gray
  • 30" x 48" x 40"
  • Assembly required
MSRP: $1,121.66
$965
As low as $31.36/mo
View Details
Jet 5-Ton Two Speed Electric Chain Hoist 3-Phase 20' Lift | TS500-230-020 140129 at Elite Metal Tools
Jet 5-Ton Two Speed Electric Chain Hoist 3-Phase 20' Lift | TS500-230-020 140129
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
MSRP: $19,857.19
$11,149
As low as $362.34/mo
View Details
Jet 2-Ton Two Speed Electric Chain Hoist 3-Phase 20' Lift | TS200-230-020 140240 at Elite Metal Tools
Jet 2-Ton Two Speed Electric Chain Hoist 3-Phase 20' Lift | TS200-230-020 140240
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
MSRP: $13,912.79
$7,888
As low as $256.36/mo
View Details
Jet TS200-230-010, 2-Ton Two Speed Electric Chain Hoist 3-Phase 10' Lift, MT200 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 6ft 140239K at Elite Metal Tools
Jet TS200-230-010, 2-Ton Two Speed Electric Chain Hoist 3-Phase 10' Lift, MT200 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 6ft 140239K
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
MSRP: $15,258.09
$8,594
As low as $279.30/mo
View Details
Jet 12" Faceplate D1-6 For Elite 17" Geared Head Lathes 892155 at Elite Metal Tools
Jet 12" Faceplate D1-6 For Elite 17" Geared Head Lathes 892155
  • Cast iron construction
  • Rectangular, square and irregular shape materials can be mounted
  • Specifically designed for Elite EGH-1740 and EGH-1760 lathes
MSRP: $837.86
$775
As low as $25.18/mo
View Details
Jet JET — Replacement Bimetal Band Saw Blade, 1" X .035" X 114-1/2" (5/8T) for EHB-8VS/M 891091 at Elite Metal Tools
Jet JET — Replacement Bimetal Band Saw Blade, 1" X .035" X 114-1/2" (5/8T) for EHB-8VS/M 891091
  • Bimetal
  • 5/8T
  • 1" X .035" X 114-1/2"
MSRP: $245.95
$237
View Details
Jet Bi-Metal Bandsaw Blade 1/4" x 0.025 x 185-1/2" (14/18VT) For EVBS-26 891190 at Elite Metal Tools
Jet Bi-Metal Bandsaw Blade 1/4" x 0.025 x 185-1/2" (14/18VT) For EVBS-26 891190
MSRP: $233.74
$225
View Details
Jet JET — Taper Attachment for W Series and GH1440 321520 at Elite Metal Tools
Jet JET — Taper Attachment for W Series and GH1440 321520
  • 10° Inclusive cutting capacity
  • Mounts to predrilled and tapped holes
  • Specially designed for each model
MSRP: $5,270.53
$4,267
As low as $138.67/mo
View Details
Jet JET — Outfeed Roller Table for ECB-1422V 891163 at Elite Metal Tools
Jet JET — Outfeed Roller Table for ECB-1422V 891163
  • 4 Rollers
  • 40" x 25.2" Roller Capacity (L x W)
  • 27-1/2" - 30-1/8" Roller to Floor Height
  • 3306 lbs. Capacity Load
  • Steel
MSRP: $3,473.13
$2,805
As low as $91.16/mo
View Details
Jet 5-Ton Two Speed Electric Chain Hoist 3-Phase 15 'Lift | TS500-230-015 140128 at Elite Metal Tools
Jet 5-Ton Two Speed Electric Chain Hoist 3-Phase 15 'Lift | TS500-230-015 140128
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
MSRP: $19,463.39
$10,945
As low as $355.71/mo
View Details

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.