JET

  • Layout
Jet JBG-6W Shop Grinder with Grinding Wheel and Wire Wheel 577126 at Elite Metal Tools
Jet JBG-6W Shop Grinder with Grinding Wheel and Wire Wheel 577126
  • Adjustable Tool Rest
  • Cast iron wheel guard
  • Cast iron wheel guards dust chutes
  • Crimped Wire wheel included
  • Rubber mounts prevents movement
$425
View Details
Jet JMD-45GH Geared Head Square Column Mill/Drill with Newall DP700 2-Axis DRO & X-Powerfeed 351151 at Elite Metal Tools
Jet JMD-45GH Geared Head Square Column Mill/Drill with Newall DP700 2-Axis DRO & X-Powerfeed 351151
  • Calibrated fine down feed built in
  • CSA/CUS Certified
  • Easy to read internal depth gauge
  • Full power to the cutting tools through 6 speed geared head
  • Heavy-duty design allows for a variety of precision drilling applications
MSRP: $16,081.99
$12,685
As low as $412.26/mo
View Details
Jet EVS-949 Mill with X-Axis JET Powerfeed and USA Made Air Draw Bar 894304 at Elite Metal Tools
Jet EVS-949 Mill with X-Axis JET Powerfeed and USA Made Air Draw Bar 894304
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $39,731.99
$31,535
As low as $624.07/mo
View Details
Jet IBGB-436 8-Inch Industrial Grinder and 4 x 36 Belt Sander 578436 at Elite Metal Tools
Jet IBGB-436 8-Inch Industrial Grinder and 4 x 36 Belt Sander 578436
  • CSA/CUS Certified
  • Industrial strength construction for demanding usage
  • Innovative safety guarding surrounding the sanding belt
  • Large Eye Safety Shields
  • Rubber sealed bearings for years of maintenance free sanding on idle wheel
MSRP: $1,175.67
$1,033
As low as $33.57/mo
View Details
Jet JMD-45VSPFT Variable Speed Geared Head Square Column Mill/Drill with Power Downfeed & Newall DP500 2-Axis DRO & X-Axis Powerfeed 351165 at Elite Metal Tools
Jet JMD-45VSPFT Variable Speed Geared Head Square Column Mill/Drill with Power Downfeed & Newall DP500 2-Axis DRO & X-Axis Powerfeed 351165
  • Easy to read internal depth gauge
  • Full power to the cutting tools through Variable Speed geared head
  • Heavy-duty design allows for a variety of precision drilling applications
  • Mill Drill Stand, p/n 350045, shown in some images, is optional
  • Milling table allows for movement
MSRP: $18,379.45
$14,378
As low as $467.28/mo
View Details
Jet JMD-45VSPFT Variable Speed Geared Head Square Column Mill/Drill with Power Downfeed & Newall DP500 2-Axis DRO 351164 at Elite Metal Tools
Jet JMD-45VSPFT Variable Speed Geared Head Square Column Mill/Drill with Power Downfeed & Newall DP500 2-Axis DRO 351164
  • Easy to read internal depth gauge
  • Full power to the cutting tools through Variable Speed geared head
  • Heavy-duty design allows for a variety of precision drilling applications
  • Mill Drill Stand, p/n 350045, shown in some images, is optional
  • Milling table allows for movement
MSRP: $15,811.72
$12,486
As low as $405.79/mo
View Details
Jet 12" 4-Jaw Chuck D1-6 For Elite 17" Geared Head Lathes 892158 at Elite Metal Tools
Jet 12" 4-Jaw Chuck D1-6 For Elite 17" Geared Head Lathes 892158
  • 4 independent one-piece jaws
  • Cast iron construction
  • Specifically designed for Elite EGH-1740 and EGH-1760 lathes
MSRP: $2,256.86
$1,850
As low as $60.12/mo
View Details
On Sale
Jet J-4400A, 12" Industrial Disc Finishing Machine 115/230V 1Ph 414602 at Elite Metal Tools
Jet J-4400A, 12" Industrial Disc Finishing Machine 115/230V 1Ph 414602
  • Easy to read scale shows exact degree of table tilt
  • Fully machined balanced disc runs vibration free
  • Heavy duty one piece steel stand
  • Large cast iron slotted table
  • Optimum speed of 1960 RPM, which is ideal for both metal and wood finishing
MSRP: $2,500.07
Was: $2,075
Now: $1,203.50
As low as $39.11/mo
View Details
Jet J-7040M, 10" x 16" Horizontal Mitering Bandsaw 414475 at Elite Metal Tools
Jet J-7040M, 10" x 16" Horizontal Mitering Bandsaw 414475
  • Adjustable blade guide with six contact point system that utilizes cam follower bearings mounted on eccentric shafts on both sides of the blades
  • Adjustable Material Stop
  • Cast iron blade wheels
  • Downfeed system is controlled by a dual system of counterbalance springs working with a hydraulic cylinder
  • Heavy-duty transmission utilizes hardened and ground gears operating in an oil bath
MSRP: $13,649.45
$10,799
As low as $350.96/mo
View Details
Jet EGH-1740 With Taper Attachment and Collet Closer 892502 at Elite Metal Tools
Jet EGH-1740 With Taper Attachment and Collet Closer 892502
  • 4-Position Carriage Stop
  • Anti-Float design eliminates backlash in the cross slide
  • Enclosed coolant system contains excess coolant for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Full Length Splash Guard
MSRP: $59,597.99
$47,289
As low as $935.84/mo
View Details
Jet EVS-949 Mill with 2-Axis ACU-RITE 303 DRO and X, Y-Axis JET Powerfeeds and USA Made Air Draw Bar 894334 at Elite Metal Tools
Jet EVS-949 Mill with 2-Axis ACU-RITE 303 DRO and X, Y-Axis JET Powerfeeds and USA Made Air Draw Bar 894334
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $47,299.99
$38,253
As low as $757.02/mo
View Details
Jet EVS-949 Mill with 3-Axis ACU-RITE 203 (Knee) DRO and X, Y-Axis JET Powerfeeds 894326 at Elite Metal Tools
Jet EVS-949 Mill with 3-Axis ACU-RITE 203 (Knee) DRO and X, Y-Axis JET Powerfeeds 894326
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $43,786.26
$34,514
As low as $683.03/mo
View Details
Jet J-4300A, 6" x 48" Industrial Belt Finishing Machine 1Ph 414600 at Elite Metal Tools
Jet J-4300A, 6" x 48" Industrial Belt Finishing Machine 1Ph 414600
  • Adjustable dust deflector and dust chute
  • Adjustable, heavy-duty, cast iron removable platen
  • Belt head adjusts vertically and horizontally
  • Completely enclosed drums and guarded sanding belt
  • Fine thread adjustments for simple and easy belt tracking
MSRP: $3,310.99
$2,694.99
As low as $87.58/mo
View Details
Jet JMD-18PFN Mill/Drill With ACU-RITE 203 DRO 350402 at Elite Metal Tools
Jet JMD-18PFN Mill/Drill With ACU-RITE 203 DRO 350402
  • 1/2” Drill chuck, chuck arbor
  • 360° head swivel
  • Adjustable carbide facemill
  • Base taper allows for easier clean up
  • Easy to read internal depth gauge
MSRP: $10,135.72
$8,075
As low as $262.43/mo
View Details
Jet JET — X-Axis Table Powerfeed for Milling Machines 350194 at Elite Metal Tools
Jet JET — X-Axis Table Powerfeed for Milling Machines 350194
  • 13L x 13W x 14 inH
  • Adjustable stops allow automatic shut off
  • Built-in clutch helps prevent damage in overload
  • Includes rapid traverse button
  • Factory installation is available
MSRP: $1,351.45
$1,162
As low as $37.76/mo
View Details
Jet JMD-40GH Geared Head Mill/Drill with Newall DP500 2-Axis DRO & X-Powerfeed 351145 at Elite Metal Tools
Jet JMD-40GH Geared Head Mill/Drill with Newall DP500 2-Axis DRO & X-Powerfeed 351145
  • Calibrated fine down feed built in
  • CSA/CUS Certified
  • Easy to read internal depth gauge
  • Full power to the cutting tools through 6 speed geared head
  • Heavy-duty design allows for a variety of precision drilling applications
MSRP: $12,906.07
$10,210
As low as $331.82/mo
View Details
On Sale
Jet ETM-949 Mill With 2-Axis ACU-RITE MILLPWR G2 CNC 894040 at Elite Metal Tools
Jet ETM-949 Mill With 2-Axis ACU-RITE MILLPWR G2 CNC 894040
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $74,869.07
Was: $58,509
Now: $48,509
As low as $959.99/mo
View Details
Jet EVS-949 Mill with 3-Axis ACU-RITE 303 (Knee) DRO and Servo X, Y, Z-Axis Powerfeeds and USA Air Powered Draw Bar 894416 at Elite Metal Tools
Jet EVS-949 Mill with 3-Axis ACU-RITE 303 (Knee) DRO and Servo X, Y, Z-Axis Powerfeeds and USA Air Powered Draw Bar 894416
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $54,057.07
$43,218
As low as $855.28/mo
View Details
Jet JET — Replacement Filter for JDC-500 Dust Collector, Pair 414705 at Elite Metal Tools
Jet JET — Replacement Filter for JDC-500 Dust Collector, Pair 414705
  • 99% efficient at 5 Microns
  • Replacement filters for JDC-501 (pair)
  • Specifically designed for Metalworking dust collection
MSRP: $635.13
$599
As low as $19.46/mo
View Details
Jet JMD-40GHPF Geared Head Mill/Drill with Power Downfeed & Newall DP500 2-Axis DRO 351146 at Elite Metal Tools
Jet JMD-40GHPF Geared Head Mill/Drill with Power Downfeed & Newall DP500 2-Axis DRO 351146
  • Calibrated fine down feed built in
  • CSA/CUS Certified
  • Easy to read internal depth gauge
  • Full power to the cutting tools through 6 speed geared head
  • Heavy-duty design allows for a variety of precision drilling applications
MSRP: $11,662.85
$9,295
As low as $302.08/mo
View Details
Jet JET — Buffer Dust Shroud, 8 in 578400 at Elite Metal Tools
Jet JET — Buffer Dust Shroud, 8 in 578400
  • Compatible with JET models IBG-8SSB and IBG-8VSB bench buffers
  • Heavy duty 14 gauge steel buffer hood housing, 4" exhaust outlet, & 10 gauge mounting plates and brackets
$549
As low as $17.84/mo
View Details
Jet J-3130, 5" x 8" Horizontal Bandsaw 414461 at Elite Metal Tools
Jet J-3130, 5" x 8" Horizontal Bandsaw 414461
  • Adjustable blade guides with side eccentric shaft with ball bearings with rear-ball bearings
  • Adjustable Material Stop
  • Blade drive is a steel, heat treated worm driving a bronze worm gear in an oil bath
  • Blade guides with side eccentric shaft with ball bearings
  • Fully adjustable hydraulic downfeed system
MSRP: $1,959.53
$1,635
As low as $53.13/mo
View Details
Jet EVS-949 Mill with 3-Axis ACU-RITE 303 (Quill) DRO and X, Y, Z-Axis JET Powerfeeds and USA Made Air Draw Bar 894343 at Elite Metal Tools
Jet EVS-949 Mill with 3-Axis ACU-RITE 303 (Quill) DRO and X, Y, Z-Axis JET Powerfeeds and USA Made Air Draw Bar 894343
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $50,678.53
$40,735
As low as $806.14/mo
View Details
Jet 10" x 16" Horizontal Bandsaw | J-7040 414478 at Elite Metal Tools
Jet 10" x 16" Horizontal Bandsaw | J-7040 414478
  • Adjustable blade guide with six contact point system that utilizes cam follower bearings mounted on eccentric shafts on both sides of the blades
  • Adjustable Material Stop
  • Heavy-duty transmission utilizes hardened and ground gears operating in an oil bath
  • Patented 3-Jaw vise with rapid action moveable jaw for faster set up
  • Swing away control panel houses major saw controls
MSRP: $9,892.40
$7,799
As low as $253.46/mo
View Details

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.