JET

  • Layout
Jet JMD-45GH Geared Head Square Column Mill/Drill with Newall DP500 2-Axis DRO 351158 at Elite Metal Tools
Jet JMD-45GH Geared Head Square Column Mill/Drill with Newall DP500 2-Axis DRO 351158
  • Calibrated fine down feed built in
  • CSA/CUS Certified
  • Easy to read internal depth gauge
  • Full power to the cutting tools through 6 speed geared head
  • Heavy-duty design allows for a variety of precision drilling applications
MSRP: $13,419.66
$10,588
As low as $344.11/mo
View Details
Jet HBS-56MVS, Variable Speed, Mitering 5" x 6" Horizontal Bandsaw, .5HP 115V 414558 at Elite Metal Tools
Jet HBS-56MVS, Variable Speed, Mitering 5" x 6" Horizontal Bandsaw, .5HP 115V 414558
  • Front legs feature leveling pads
  • Fully adjustable ball bearing blade guides
  • Hardened Ferrous 82-130 SFPM
  • Quick speed changes with the turn of a dial, no more belt changes
  • Variable Speed gives you the ability to cut various material
MSRP: $1,932.47
$1,612
As low as $52.39/mo
View Details
On Sale
Jet EVS-949 Mill with USA Air Powered Draw Bar 894375 at Elite Metal Tools
Jet EVS-949 Mill with USA Air Powered Draw Bar 894375
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $36,799.39
Was: $29,380
Now: $19,380
As low as $383.53/mo
View Details
Jet SWG-272VS EVS Square Wheel Grinder 1HP, 115/230V, Single Phase 577405 at Elite Metal Tools
Jet SWG-272VS EVS Square Wheel Grinder 1HP, 115/230V, Single Phase 577405
  • Adjustable Dust port with high dust collection efficiency and drive sparks away from the Operator
  • Aluminum casted drive wheel for years of use
  • Flat and Angular Stock: Platen setting is the perfect angle for high speed, precision flat and level grinding
  • Fully guarded on all grinding surfaces
  • Steel frame and platen provides heavy duty construction
MSRP: $3,540.67
$2,855
As low as $92.78/mo
View Details
On Sale
Jet EVS-949 Mill with 2-Axis Newall DP700 DRO 894351 at Elite Metal Tools
Jet EVS-949 Mill with 2-Axis Newall DP700 DRO 894351
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $39,326.53
Was: $31,237
Now: $21,237
As low as $420.28/mo
View Details
Jet JMD-40GH Geared Head Mill/Drill with Newall DP500 2-Axis DRO 351144 at Elite Metal Tools
Jet JMD-40GH Geared Head Mill/Drill with Newall DP500 2-Axis DRO 351144
  • Calibrated fine down feed built in
  • CSA/CUS Certified
  • Easy to read internal depth gauge
  • Full power to the cutting tools through 6 speed geared head
  • Heavy-duty design allows for a variety of precision drilling applications
MSRP: $10,460
$8,272
As low as $268.84/mo
View Details
Jet MBS-1014W-3, 10" x 14" Horizontal Mitering Bandsaw 414477 at Elite Metal Tools
Jet MBS-1014W-3, 10" x 14" Horizontal Mitering Bandsaw 414477
  • Adjustable Material Stop
  • Built-in, self-propelled blade brush extends blade life
  • Carbide blade guides with roller bearings
  • Coolant is distributed through the blade guides
  • Fully adjustable hydraulic downfeed with separate on/off control valve
MSRP: $11,784.40
$9,591
As low as $311.70/mo
View Details
Jet EVS-1440 Electronic Variable Speed lathe with Acu-Rite 203 DRO and Collet Closer, 3HP 311446 at Elite Metal Tools
Jet EVS-1440 Electronic Variable Speed lathe with Acu-Rite 203 DRO and Collet Closer, 3HP 311446
  • Compound and cross slide have backlash elimination
  • Electronic Chuck Key Docking Station
  • Front Removable Chip Tray
  • Full Length Splash Guard
  • Independent lead screw and feed rod
MSRP: $30,136.80
$23,667
As low as $468.36/mo
View Details
Jet J-4002 1 x 42 Bench Belt and Disc Sander 577003 at Elite Metal Tools
Jet J-4002 1 x 42 Bench Belt and Disc Sander 577003
  • Abrasive belt unit removes material and finishes at the same time, allowing the operator to get into small openings, plus handle odd shapes and angles
  • Adjustable dust deflector and dust chute
  • Cast iron construction
  • Deluxe miter gauge that turns and locks for common angles, 45° both left and right
  • Heavy-duty steel base and rubber feet
MSRP: $858.10
$771
As low as $25.05/mo
View Details
Jet EVS-949 Mill with 3-Axis ACU-RITE 303 (Knee) DRO and X, Y, Z-Axis JET Powerfeeds 894349 at Elite Metal Tools
Jet EVS-949 Mill with 3-Axis ACU-RITE 303 (Knee) DRO and X, Y, Z-Axis JET Powerfeeds 894349
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $48,651.45
$39,246
As low as $776.67/mo
View Details
Jet IBG-8SSB 8" Industrial Buffer 577408 at Elite Metal Tools
Jet IBG-8SSB 8" Industrial Buffer 577408
  • CSA/CUS Certified
  • Heavy Cast Iron Bases
  • Oversized motor shafts, heavy retainer plates and massive lock nuts.
  • Safety switch with removable key
  • The wide range of spacer options allow you to run a huge variety of finishing wheels.
$537
As low as $17.45/mo
View Details
Jet EVS-949 Mill with 3-Axis ACU-RITE 203 (Quill) DRO and X-Axis JET Powerfeed 894317 at Elite Metal Tools
Jet EVS-949 Mill with 3-Axis ACU-RITE 203 (Quill) DRO and X-Axis JET Powerfeed 894317
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $41,623.99
$32,925
As low as $651.58/mo
View Details
Jet 315mm Ferrous Manual Cold Saw | CS-315 414227 at Elite Metal Tools
Jet 315mm Ferrous Manual Cold Saw | CS-315 414227
  • Blade drive reduction gearbox operates in an oil bath for increased durability
  • Cast iron frame
  • Flood coolant system
  • Flood coolant system with a 1-1/3 Gallon coolant reservoir and pump with flow control system extends blade life
  • Fully adjustable material depth stop for sawing repeatability and increased production
MSRP: $4,581.27
$3,699
As low as $120.21/mo
View Details
Jet JMD-18 Mill/Drill With Newall DP500 DRO and X-Axis Table Powerfeed 350134 at Elite Metal Tools
Jet JMD-18 Mill/Drill With Newall DP500 DRO and X-Axis Table Powerfeed 350134
  • 1/2” Drill chuck, chuck arbor
  • 360° head swivel
  • Adjustable carbide facemill
  • Base taper allows for easier clean up
  • Easy to read internal depth gauge
MSRP: $9,459.99
$7,537
As low as $244.95/mo
View Details
Jet J-7040-4, 10" x 16" Horizontal Bandsaw 414499 at Elite Metal Tools
Jet J-7040-4, 10" x 16" Horizontal Bandsaw 414499
  • Adjustable blade guide with six contact point system that utilizes cam follower bearings mounted on eccentric shafts on both sides of the blades
  • Adjustable Material Stop
  • Heavy-duty transmission utilizes hardened and ground gears operating in an oil bath
  • Patented 3-Jaw vise with rapid action moveable jaw for faster set up
  • Swing away control panel houses major saw controls
MSRP: $10,135.72
$7,999
As low as $259.96/mo
View Details
Jet EVS-949 Mill with 3-Axis ACU-RITE 203 (Knee) DRO and X, Y, Z-Axis JET Powerfeeds and USA Made Air Draw Bar 894329 at Elite Metal Tools
Jet EVS-949 Mill with 3-Axis ACU-RITE 203 (Knee) DRO and X, Y, Z-Axis JET Powerfeeds and USA Made Air Draw Bar 894329
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $49,529.80
$39,891
As low as $789.44/mo
View Details
Jet EVS-949 Mill with 3-Axis ACU-RITE 303 (Knee) DRO and X-Axis JET Powerfeed 894345 at Elite Metal Tools
Jet EVS-949 Mill with 3-Axis ACU-RITE 303 (Knee) DRO and X-Axis JET Powerfeed 894345
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $44,056.53
$34,713
As low as $686.97/mo
View Details
On Sale
Jet EVS-949 Mill with 2-Axis ACU-RITE 203 DRO and X-Axis JET Powerfeed 894310 at Elite Metal Tools
Jet EVS-949 Mill with 2-Axis ACU-RITE 203 DRO and X-Axis JET Powerfeed 894310
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $40,880.72
Was: $32,379
Now: $22,379
As low as $442.88/mo
View Details
Jet JET — Replacement Blade, 1/2 x 0.0256 x 156 10T for VBS-18MWEVS 414426 at Elite Metal Tools
Jet JET — Replacement Blade, 1/2 x 0.0256 x 156 10T for VBS-18MWEVS 414426
  • 10T
  • Replacement blade for for Jet VBS-18MWEVS Bandsaw
$225
View Details
Jet EVS-1440 Electronic Variable Speed lathe with Acu_rite 203 DRO, Taper Attachment & Collet Closer,3HP 311447 at Elite Metal Tools
Jet EVS-1440 Electronic Variable Speed lathe with Acu_rite 203 DRO, Taper Attachment & Collet Closer,3HP 311447
  • Compound and cross slide have backlash elimination
  • Electronic Chuck Key Docking Station
  • Front Removable Chip Tray
  • Full Length Splash Guard
  • Independent lead screw and feed rod
MSRP: $35,407.45
$28,358
As low as $561.20/mo
View Details
Jet JTM-1254RVS Variable Speed Vertical Mill Machine 230/460V, 3Ph 690020 at Elite Metal Tools
Jet JTM-1254RVS Variable Speed Vertical Mill Machine 230/460V, 3Ph 690020
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $27,028.53
$21,383
As low as $423.16/mo
View Details
Jet J-9225, 8-3/4" Zip Miter Horizontal Bandsaw 414467 at Elite Metal Tools
Jet J-9225, 8-3/4" Zip Miter Horizontal Bandsaw 414467
  • Adjustable blade guides that utilizes cam follower bearings mounted on eccentric shafts
  • Adjustable Material Stop
  • Convenient control panel with overload protection
  • Fully adjustable hydraulic downfeed system
  • Heavy-duty cast iron saw head and sturdy base
MSRP: $6,567.87
$5,220
As low as $169.65/mo
View Details
Jet HBS-56S, 5" x 6" Horizontal Mitering Bandsaw 414457 at Elite Metal Tools
Jet HBS-56S, 5" x 6" Horizontal Mitering Bandsaw 414457
  • Adjustable Material Stop
  • Ball bearing supported blade wheel
  • Deluxe enclosed stand with wheels and handle for easy movement
  • Fully adjustable hydraulic downfeed system
  • Mitering head swivels to cut any angle 0° - 60° while the work piece remains secured
MSRP: $1,864.93
$1,556
As low as $50.57/mo
View Details
Jet JBG-6W Shop Grinder with Grinding Wheel and Wire Wheel 577126 at Elite Metal Tools
Jet JBG-6W Shop Grinder with Grinding Wheel and Wire Wheel 577126
  • Adjustable Tool Rest
  • Cast iron wheel guard
  • Cast iron wheel guards dust chutes
  • Crimped Wire wheel included
  • Rubber mounts prevents movement
$425
View Details

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.