JET

  • Layout
Jet 1-Ton Two Speed Electric Chain Hoist 3-Phase 20' Lift | TS100-230-020 140238 at Elite Metal Tools
Jet 1-Ton Two Speed Electric Chain Hoist 3-Phase 20' Lift | TS100-230-020 140238
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
MSRP: $10,779.99
$6,244
As low as $202.93/mo
View Details
Jet JTM-1050VS2 Mill With 3-Axis ACU-RITE 203 DRO (Quill) With X, Y and Z-Axis Powerfeeds 690160 at Elite Metal Tools
Jet JTM-1050VS2 Mill With 3-Axis ACU-RITE 203 DRO (Quill) With X, Y and Z-Axis Powerfeeds 690160
  • Adjustable gibs throughout
  • Chrome lead screws on X and Y axis
  • Chrome-plated motor shaft with bearing support at end
  • Hardened and ground square vertical knee ways and cross ways
  • Heavy duty motor drive
MSRP: $31,893.72
$25,776
As low as $510.10/mo
View Details
Jet JET 15" Planer Accessory Side Table 722151 at Elite Metal Tools
Jet JET 15" Planer Accessory Side Table 722151
  • Adjustable glides help level table
  • Double Steel Rollers help feed boards across table
  • Easily bolts to JET 15" Planer for more efficient planning
  • Square steel tube support legs assist in supporting materials
MSRP: $229.67
$220
View Details
Jet JTM-1 Mill With Newall DP500 DRO 692187 at Elite Metal Tools
Jet JTM-1 Mill With Newall DP500 DRO 692187
  • Heavy duty splined motor drive
  • Internal coolant tank built into base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
  • Precision bored and honed milling head
MSRP: $19,190.26
$14,969
As low as $486.49/mo
View Details
Jet JTM-1050EVS2/230 Mill With Acu-Rite 203 DRO With X and Y-Axis Powerfeeds 690621 at Elite Metal Tools
Jet JTM-1050EVS2/230 Mill With Acu-Rite 203 DRO With X and Y-Axis Powerfeeds 690621
  • Automatic oiler releases 3 to 6 cc/cy of lubrication at adjustable time intervals
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $33,785.72
$27,166
As low as $537.61/mo
View Details
Jet Coolant System with Switch For ELITE Mills 894092 at Elite Metal Tools
Jet Coolant System with Switch For ELITE Mills 894092
  • Accessory for JET ELITE Mills
MSRP: $837.86
$765
As low as $24.86/mo
View Details
Jet JTM-1254VS with ACU-RITE 203 3X (Q) DRO, X & Y Powerfeeds & Air Power Drawbar 698064 at Elite Metal Tools
Jet JTM-1254VS with ACU-RITE 203 3X (Q) DRO, X & Y Powerfeeds & Air Power Drawbar 698064
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $40,272.53
$31,932
As low as $631.93/mo
View Details
Jet TS200-460-010, 2-Ton Two Speed Electric Chain Hoist 3-Phase 10' Lift, MT200-4 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 6ft 144007K at Elite Metal Tools
Jet TS200-460-010, 2-Ton Two Speed Electric Chain Hoist 3-Phase 10' Lift, MT200-4 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 6ft 144007K
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
MSRP: $15,043.59
$8,481
As low as $275.63/mo
View Details
On Sale
Jet 3-Ton Two Speed Electric Chain Hoist 3-Phase 20' Lift | TS300-460-20 144012 at Elite Metal Tools
Jet 3-Ton Two Speed Electric Chain Hoist 3-Phase 20' Lift | TS300-460-20 144012
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
MSRP: $15,692.59
Was: $8,823
Now: $4,411.50
As low as $143.37/mo
View Details
Jet 1/2-Ton Two Speed Electric Chain Hoist 3-Phase 20' Lift | TS050-460-020 144003 at Elite Metal Tools
Jet 1/2-Ton Two Speed Electric Chain Hoist 3-Phase 20' Lift | TS050-460-020 144003
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
MSRP: $8,120.19
$4,656
As low as $151.32/mo
View Details
Jet JTM-1254VS with NEWALL DP700 3X (Q) DRO, X, Y & Z Powerfeeds 698082 at Elite Metal Tools
Jet JTM-1254VS with NEWALL DP700 3X (Q) DRO, X, Y & Z Powerfeeds 698082
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $39,596.80
$31,436
As low as $622.11/mo
View Details
Jet E-1340VS With ACU-RITE 203 DRO With Taper Attachment and Collet Closer 892406 at Elite Metal Tools
Jet E-1340VS With ACU-RITE 203 DRO With Taper Attachment and Collet Closer 892406
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Inverter drive system provides infinitely variable spindle speeds
MSRP: $41,488.80
$32,826
As low as $649.62/mo
View Details
On Sale
Jet 3-Ton Two Speed Electric Chain Hoist 3-Phase 10' Lift | TS300-460-010 144010 at Elite Metal Tools
Jet 3-Ton Two Speed Electric Chain Hoist 3-Phase 10' Lift | TS300-460-010 144010
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
MSRP: $14,461.69
Was: $8,176
Now: $4,088
As low as $132.86/mo
View Details
Jet E-1340VS With Newall DP700 DRO With Taper Attachment 892420 at Elite Metal Tools
Jet E-1340VS With Newall DP700 DRO With Taper Attachment 892420
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Heavy-duty stand with full length foot brake
MSRP: $36,083.07
$28,854
As low as $571.02/mo
View Details
Jet JTM-949EVS Mill With Acu-Rite 203 DRO With X-Axis Powerfeed 690520 at Elite Metal Tools
Jet JTM-949EVS Mill With Acu-Rite 203 DRO With X-Axis Powerfeed 690520
  • Automatic oiler releases 3 to 6 cc/cy of lubrication every 30 minutes
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $29,461.07
$23,170
As low as $458.53/mo
View Details
Jet JTM-1050EVS2/230 Mill With 3-Axis Acu-Rite 203 DRO (Quill) With X, Y and Z-Axis Powerfeeds 690633 at Elite Metal Tools
Jet JTM-1050EVS2/230 Mill With 3-Axis Acu-Rite 203 DRO (Quill) With X, Y and Z-Axis Powerfeeds 690633
  • Automatic oiler releases 3 to 6 cc/cy of lubrication at adjustable time intervals
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $38,380.53
$30,542
As low as $604.42/mo
View Details
Jet JTM-1050VS2 Mill With X and Y-Axis Powerfeeds 690150 at Elite Metal Tools
Jet JTM-1050VS2 Mill With X and Y-Axis Powerfeeds 690150
  • Adjustable gibs throughout
  • Chrome lead screws on X and Y axis
  • Chrome-plated motor shaft with bearing support at end
  • Hardened and ground square vertical knee ways and cross ways
  • Heavy duty motor drive
MSRP: $27,028.53
$21,383
As low as $423.16/mo
View Details
Jet JTM-4VS Mill With 3-Axis ACU-RITE 203 DRO (Quill) 690184 at Elite Metal Tools
Jet JTM-4VS Mill With 3-Axis ACU-RITE 203 DRO (Quill) 690184
  • Adjustable gibs throughout
  • Heavy duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $24,325.72
$19,397
As low as $383.86/mo
View Details
Jet JTM-949EVS Mill With Acu-Rite 203 DRO With X and Y-Axis Powerfeeds 690522 at Elite Metal Tools
Jet JTM-949EVS Mill With Acu-Rite 203 DRO With X and Y-Axis Powerfeeds 690522
  • Automatic oiler releases 3 to 6 cc/cy of lubrication every 30 minutes
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $32,501.80
$26,223
As low as $518.95/mo
View Details
Jet E-1340VS With ACU-RITE 303 CSS DRO With Taper Attachment and Collet Closer 892418 at Elite Metal Tools
Jet E-1340VS With ACU-RITE 303 CSS DRO With Taper Attachment and Collet Closer 892418
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Inverter drive system provides infinitely variable spindle speeds
MSRP: $40,813.07
$32,329
As low as $639.79/mo
View Details
Jet ETM-949 Mill with 2-Axis Newall DP700 DRO 894151 at Elite Metal Tools
Jet ETM-949 Mill with 2-Axis Newall DP700 DRO 894151
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $32,704.53
$26,372
As low as $521.90/mo
View Details
Jet JTM-4VS Mill With ACU-RITE 203 DRO With X and Y-Axis Powerfeeds and Power Draw Bar 690230 at Elite Metal Tools
Jet JTM-4VS Mill With ACU-RITE 203 DRO With X and Y-Axis Powerfeeds and Power Draw Bar 690230
  • Adjustable gibs throughout
  • Heavy duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $28,379.99
$22,376
As low as $442.82/mo
View Details
Jet JCT-3640, 2" Stroke, Round Shank, Open Handle Chipping Hammer 550640 at Elite Metal Tools
Jet JCT-3640, 2" Stroke, Round Shank, Open Handle Chipping Hammer 550640
  • Comes with standard type retainer
  • Heat treated cylinder and piston for added durability
  • Heavy-Duty, industry proven valve design
  • Open style forged handle is engineered to dissipate the impact energy more efficiently, reducing user fatigue and increasing safety
  • Backed by the industry leading 2-Year Warranty
MSRP: $944.89
$632
As low as $20.54/mo
View Details
Jet JTM-1254RVS with ACU-RITE 203 DRO X & Y Powerfeeds & Air Power Drawbar 698111 at Elite Metal Tools
Jet JTM-1254RVS with ACU-RITE 203 DRO X & Y Powerfeeds & Air Power Drawbar 698111
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $38,245.45
$30,443
As low as $602.46/mo
View Details

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.