JET

  • Layout
Jet HVBS-10-DMWC 10” Horizontal/Vertical Dual Mitering Portable Band Saw with Coolant System, 1HP, 115V, 1 Ph 424465 at Elite Metal Tools
Jet HVBS-10-DMWC 10” Horizontal/Vertical Dual Mitering Portable Band Saw with Coolant System, 1HP, 115V, 1 Ph 424465
  • Adjustable vise
  • Automatic shut off switch stops the sawing process
  • Blade is fully guarded for Operator safety
  • Built-in, self-propelled blade brush prevents chip build up in blade guides
  • Head is pressure controlled by a hydraulic cylinder
MSRP: $6,892.26
$5,609
As low as $182.29/mo
View Details
Jet The JPS-10 1.75 HP 115V 52" Proshop Tablesaw with Steel wings 725005K at Elite Metal Tools
Jet The JPS-10 1.75 HP 115V 52" Proshop Tablesaw with Steel wings 725005K
  • Convenient, magnetic paddle switch for the safest operation possible
  • CSA Certified
  • Improved dust shroud around blade for greater dust collection
  • Innovative single belt design for easier belt tensioning and reduced vibration
  • Low profile riving knife included
MSRP: $2,973.07
$2,415
As low as $78.48/mo
View Details
Jet EGH-1740 With ACU-RITE 303 DRO With Taper Attachment and Collet Closer 892510 at Elite Metal Tools
Jet EGH-1740 With ACU-RITE 303 DRO With Taper Attachment and Collet Closer 892510
  • 4-Position Carriage Stop
  • Anti-Float design eliminates backlash in the cross slide
  • Enclosed coolant system contains excess coolant for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Full Length Splash Guard
MSRP: $67,571.45
$53,147
As low as $1,051.77/mo
View Details
Jet 8" x 12" Horizontal/Vertical Geared Head Bandsaw | HBS-812G 413460 at Elite Metal Tools
Jet 8" x 12" Horizontal/Vertical Geared Head Bandsaw | HBS-812G 413460
  • Adjustable Material Stop
  • Built-in, self-propelled blade brush extends blade life
  • Hardened and ground worm gear
  • Heavy-duty cast iron saw bow and head
  • Heavy-duty geared head transmission for quick speed changes
MSRP: $3,783.99
$3,079
As low as $100.06/mo
View Details
Jet JWBS-20-5, 20" Bandsaw, 5HP, 230V 714850 at Elite Metal Tools
Jet JWBS-20-5, 20" Bandsaw, 5HP, 230V 714850
  • Blade tracking window provides clear view of blade during tracking
  • Cast iron handwheels and ergonomic-designed knobs make adjustments smooth and easy
  • Cast iron trunnion for maximum support and stability
  • Conveniently located dual 4" dust collection ports catch dust and chips at the source
  • Easy-to-read blade tension scale can be viewed through upper door window
MSRP: $6,216.53
$4,975
As low as $161.68/mo
View Details
Jet EGH-1740 With ACU-RITE 303 DRO 892507 at Elite Metal Tools
Jet EGH-1740 With ACU-RITE 303 DRO 892507
  • 4-Position Carriage Stop
  • Anti-Float design eliminates backlash in the cross slide
  • Enclosed coolant system contains excess coolant for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Full Length Splash Guard
MSRP: $58,651.99
$46,594
As low as $922.09/mo
View Details
On Sale
Jet 12" Planer / Jointer 3HP | JPJ-12B 715100 at Elite Metal Tools
Jet 12" Planer / Jointer 3HP | JPJ-12B 715100
  • Extremely quick changeover between jointing and planing functions. Fence does not need to be removed
  • Heavy-duty cast iron tables with a ground finish to ensure accuracy and flatness
  • Heavy-duty, one-piece steel closed stand includes mounting tabs for increased stability
  • Large handwheel for quick and precise adjustments of planer table
  • Parallelogram design keeps the table close to the cutterhead for improved finish and allows for precise depth of cut adjustments
MSRP: $5,757.06
Was: $4,625
Now: $3,006.25
As low as $97.70/mo
View Details
Jet EGH-1740 With Taper Attacment 892500 at Elite Metal Tools
Jet EGH-1740 With Taper Attacment 892500
  • 4-Position Carriage Stop
  • Anti-Float design eliminates backlash in the cross slide
  • Enclosed coolant system contains excess coolant for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Full Length Splash Guard
MSRP: $55,678.80
$44,409
As low as $878.85/mo
View Details
On Sale
Jet J-948WBSV 9” x 48” Variable Speed Small Piece Metal Wide Belt Sander JT1-550 at Elite Metal Tools
Jet J-948WBSV 9” x 48” Variable Speed Small Piece Metal Wide Belt Sander JT1-550
  • Belt Size (in.): 9 x 48
  • Minimum Material Thickness (in.): 1/16
  • Abrasive Drum Speed (rpm): 660 - 2500
  • Table Height (in.): 32.7 - 36.8
MSRP: $16,217.07
Was: $13,199
Now: $9,107.31
As low as $295.98/mo
View Details
Jet IBDG-436VS Variable Speed Industrial 4" x 36" Belt and 9" Disc Grinder 577634 at Elite Metal Tools
Jet IBDG-436VS Variable Speed Industrial 4" x 36" Belt and 9" Disc Grinder 577634
  • 9" aluminum disc reduces heat buildup and prolongs abrasive life
  • Cast iron work rests with tool-less adjustments
  • Contact wheel grinding with toolless access
  • Easy-to-use belt tracking.
  • Full guarding of all non-work contact points
MSRP: $1,513.59
$1,276
As low as $41.47/mo
View Details
Jet J-8201VS, 14" Metal/Wood Vertical Variable Speed Bandsaw 414502 at Elite Metal Tools
Jet J-8201VS, 14" Metal/Wood Vertical Variable Speed Bandsaw 414502
  • 14 TPI metal cutting blade included
  • 6 TPI wood cutting blade included
  • Adjustable table
  • Conveniently located on/off switch
  • Gear box design allows wood/metal model saws to be used for a wider variety of metal, wood, non-ferrous metal and plastic cutting applications
MSRP: $3,946.13
$3,211
As low as $104.35/mo
View Details
Jet HBS-1321W, 13" x 21" Semi-Auto Horizontal Bandsaw 414471 at Elite Metal Tools
Jet HBS-1321W, 13" x 21" Semi-Auto Horizontal Bandsaw 414471
  • Adjustable Material Stop
  • Built-in, self-propelled blade brush extends blade life
  • Carbide blade guides with roller bearings
  • Coolant is distributed through the blade guides
  • Fully adjustable hydraulic downfeed controls the rate of decent
MSRP: $21,622.80
$17,599
As low as $348.28/mo
View Details
JET JPW-208HH-BLK Black 230V Single Phase 20” Helical Cutterhead Planer with 25¾”x20” Table JT1-1374 at Elite Metal Tools
JET JPW-208HH-BLK Black 230V Single Phase 20” Helical Cutterhead Planer with 25¾”x20” Table JT1-1374
  • Cutterhead diameter: 3-7/32”
  • Table size: 25¾” x 20” 
  • Cutterhead speed: 5000 rpm 
  • Feed rate: 24 & 31 FPM
MSRP: $7,027.45
$5,699
As low as $185.21/mo
View Details
Jet MBS-1018-1 , 10" x 18" Horizontal Dual Mitering Bandsaw 413411 at Elite Metal Tools
Jet MBS-1018-1 , 10" x 18" Horizontal Dual Mitering Bandsaw 413411
  • Adjustable Material Stop
  • Automatic shut off switch stops the sawing process
  • Hydraulic downfeed control is easily adjusted enabling feed rates to evolve with variable types of materials
  • Integrated pressurized wash hose for easy machine clean up
  • Magnetic starter for low voltage and lost phase protection
MSRP: $12,838.53
$10,449
As low as $339.59/mo
View Details
Jet JSG-96, Benchtop 6" x 48" Belt / 9" Disc Sander, 3/4HP 1Ph, 115V 708595 at Elite Metal Tools
Jet JSG-96, Benchtop 6" x 48" Belt / 9" Disc Sander, 3/4HP 1Ph, 115V 708595
  • Built-in handles for easier portability
  • Drive drum is rubber-coated for a better grip on the sanding belt resulting in less slippage
  • Exclusive dual thumbscrew belt tracking adjustment locks to keep belt on track during use
  • Graphite covered steel platen runs cooler increasing machine and belt life
  • Large cast iron table has preset stops at 90° and 45° to let you use the belt sander vertically, horizontally or anywhere in between
MSRP: $1,405.46
$1,193.50
As low as $38.78/mo
View Details
Jet JTM-1254RVS with ACU-RITE 203 3X (Q) DRO, X, Y & Z Powerfeeds 698124 at Elite Metal Tools
Jet JTM-1254RVS with ACU-RITE 203 3X (Q) DRO, X, Y & Z Powerfeeds 698124
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $40,002.26
$31,735
As low as $628.03/mo
View Details
Jet MT500, 5 Ton Two Speed Electric Trolley 3-Phase 230V 140190 at Elite Metal Tools
Jet MT500, 5 Ton Two Speed Electric Trolley 3-Phase 230V 140190
  • Heavy-Duty motor puts out up to 0.8HP making it the strongest in it's class
  • TAA Approved
  • Two speeds reduces bump firing to while still allowing high speed movement of materials
  • Indoor and Outdoor use with IP-55 rating for trolley and IP-65 rating for the pendant
  • Expanded flange capacity kits are available
MSRP: $5,715.59
$3,338
As low as $108.48/mo
View Details
Jet EVS-949 Mill with 3-Axis ACU-RITE 203 (Knee) DRO 894323 at Elite Metal Tools
Jet EVS-949 Mill with 3-Axis ACU-RITE 203 (Knee) DRO 894323
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $40,677.99
$32,230
As low as $637.83/mo
View Details
Jet JOSS-S, Floor Model Oscillating Spindle Sander, 1HP, 1Ph, 115V 723950 at Elite Metal Tools
Jet JOSS-S, Floor Model Oscillating Spindle Sander, 1HP, 1Ph, 115V 723950
  • 1-1/2" Oscillating action reduces friction heat to protect wood and prolong sleeve life
  • Baffles create a chamber under the table for improved dust collection
  • Includes 1/4", 3/8", 1/2", 5/8", 3/4", 1", 1-1/2", 2", 3" and 4" spindle assemblies
  • Integrated paddle switch with safety key
  • Main spindle support runs on precision ball bearings and is oscillated by a heavy-duty worm and gear mechanism for consistent performance
MSRP: $2,973.07
$2,419
As low as $78.61/mo
View Details
Jet IDP-22, 22" Industrial Floor Model Drill Press 354301 at Elite Metal Tools
Jet IDP-22, 22" Industrial Floor Model Drill Press 354301
  • 1/2" diameter external positive depth stop with three nut locking feature for quick adjustment
  • Adjustable tension spindle return spring
  • Drill chuck and key attach to the side of the drill press always within reach of the operator
  • Hinged metal belt and pulley cover
  • Large Hand Grips designed with the users comfort in mind
MSRP: $3,675.87
$2,991
As low as $97.20/mo
View Details
Jet JMD-18 Mill/Drill With NEWALL DP500 DRO 350133 at Elite Metal Tools
Jet JMD-18 Mill/Drill With NEWALL DP500 DRO 350133
  • 1/2” Drill chuck, chuck arbor
  • 360° head swivel
  • Adjustable carbide facemill
  • Base taper allows for easier clean up
  • Easy to read internal depth gauge
MSRP: $8,284.20
$6,673
As low as $216.87/mo
View Details
Jet IBG-8, 8" Industrial Bench Grinder 578008 at Elite Metal Tools
Jet IBG-8, 8" Industrial Bench Grinder 578008
  • Adjustable safety shields
  • Adjustable Tool Rest
  • Fine and coarse vitrified grinding wheels
  • Heavy duty capacitor motor
  • Heavy duty construction for demanding environments
MSRP: $675.72
$632
As low as $20.54/mo
View Details
Jet JET — Deluxe Woodworking Band Saw Fence with Resaw - (JRF-14N) 714101 at Elite Metal Tools
Jet JET — Deluxe Woodworking Band Saw Fence with Resaw - (JRF-14N) 714101
  • Fits 15" x 15" band saw tables.
  • For use with JET JRF-`4 band saw
  • Aluminum material
MSRP: $229.67
$225
View Details
Jet JWBS-20-3, 20" Bandsaw, 3HP, 230V 714800 at Elite Metal Tools
Jet JWBS-20-3, 20" Bandsaw, 3HP, 230V 714800
  • Blade tracking window provides clear view of blade during tracking
  • Cast iron handwheels and ergonomic-designed knobs make adjustments smooth and easy
  • Cast iron trunnion for maximum support and stability
  • Conveniently located dual 4" dust collection ports catch dust and chips at the source
  • Easy-to-read blade tension scale can be viewed through upper door window
MSRP: $5,743.53
$4,570
As low as $148.52/mo
View Details

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.