JET

  • Layout
Jet ETM-949 Mill with 3-Axis ACU-RITE 303 (Quill) DRO and X, Y-Axis JET Powerfeeds 894140 at Elite Metal Tools
Jet ETM-949 Mill with 3-Axis ACU-RITE 303 (Quill) DRO and X, Y-Axis JET Powerfeeds 894140
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $40,137.45
$31,325
As low as $619.92/mo
View Details
Jet TS200-460-015,2-Ton Two Speed Electric Chain Hoist 3-Phase 15' Lift, MT200-4 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 11ft 144008K at Elite Metal Tools
Jet TS200-460-015,2-Ton Two Speed Electric Chain Hoist 3-Phase 15' Lift, MT200-4 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 11ft 144008K
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
  • 5 Pocket Chain Sprocket provides reduced vibration, smoother operation, and reduced chain wear during long lifting or lowering of loads
MSRP: $16,310.79
$9,144
As low as $297.18/mo
View Details
Jet ETM-949 Mill with 2-Axis Newall DP700 DRO and X, Y, Z-Axis JET Powerfeeds 894156 at Elite Metal Tools
Jet ETM-949 Mill with 2-Axis Newall DP700 DRO and X, Y, Z-Axis JET Powerfeeds 894156
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $38,650.80
$30,260
As low as $598.84/mo
View Details
Jet JET — Replacement Blade, Bimetal, 1.33 x 0.043 x 192-1/8 5/8T for ECB-1422V 891165 at Elite Metal Tools
Jet JET — Replacement Blade, Bimetal, 1.33 x 0.043 x 192-1/8 5/8T for ECB-1422V 891165
  • 1.33" Width
  • 0.043" Thickness
  • 192-1/8" Length
  • 5/8T
$415
View Details
Jet JTM-4VS Mill With 3-Axis Newall DP700 DRO (Quill) 691202 at Elite Metal Tools
Jet JTM-4VS Mill With 3-Axis Newall DP700 DRO (Quill) 691202
  • Adjustable gibs throughout
  • Heavy duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $23,379.72
$18,395
As low as $364.03/mo
View Details
Jet JTM-1254RVS with ACU-RITE 203 DRO X & Y Powerfeeds 698110 at Elite Metal Tools
Jet JTM-1254RVS with ACU-RITE 203 DRO X & Y Powerfeeds 698110
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $35,947.99
$28,308
As low as $560.21/mo
View Details
Jet JTM-1050EVS2/230 Mill With 3-Axis Acu-Rite 203 DRO (Knee) With X-Axis Powerfeed 690624 at Elite Metal Tools
Jet JTM-1050EVS2/230 Mill With 3-Axis Acu-Rite 203 DRO (Knee) With X-Axis Powerfeed 690624
  • Automatic oiler releases 3 to 6 cc/cy of lubrication at adjustable time intervals
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $32,974.80
$26,157
As low as $517.64/mo
View Details
Jet JCT-1602, Benchtop Sand Rammer 550602 at Elite Metal Tools
Jet JCT-1602, Benchtop Sand Rammer 550602
  • All Steel cylinder housing for increased durability
  • Fast powerful blows for compacting small, medium, and large sand molds
  • Front end seal protects the piston from excessive dirt and debris extending tool life
  • Heavy-Duty, industry proven valve design
  • Backed by the industry leading 2-Year Warranty
MSRP: $1,596.09
$995
As low as $32.33/mo
View Details
Jet JET — Replacement Outer Filter for IAFS-1700 415106 at Elite Metal Tools
Jet JET — Replacement Outer Filter for IAFS-1700 415106
MSRP: $256.73
$234
View Details
Jet JET — Replacement Blade, 1-5/16" x 0.043" x 155-1/2 4/6VT 413401 at Elite Metal Tools
Jet JET — Replacement Blade, 1-5/16" x 0.043" x 155-1/2 4/6VT 413401
  • Replacement Blade for Jet Saws
  • Shop the Jet store for all your replacement part needs
MSRP: $540.53
$525
As low as $17.06/mo
View Details
Jet JET —Replacement Charcoal Filters for IAFS3000 Industrial Air Filtration System 415155 at Elite Metal Tools
Jet JET —Replacement Charcoal Filters for IAFS3000 Industrial Air Filtration System 415155
MSRP: $581.12
$545
As low as $17.71/mo
View Details
Jet ETM-949 Mill with 3-Axis ACU-RITE 203(Quill) DRO 894116 at Elite Metal Tools
Jet ETM-949 Mill with 3-Axis ACU-RITE 203(Quill) DRO 894116
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $34,934.45
$27,575
As low as $545.70/mo
View Details
Jet 1-Ton Two Speed Electric Chain Hoist 3-Phase 15' Lift | TS100-230-015 140237 at Elite Metal Tools
Jet 1-Ton Two Speed Electric Chain Hoist 3-Phase 15' Lift | TS100-230-015 140237
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
MSRP: $10,481.89
$5,799
As low as $188.46/mo
View Details
Jet JTM-1254RVS with ACU-RITE 203 3X (K) DRO, X, Y & Z Powerfeeds 698118 at Elite Metal Tools
Jet JTM-1254RVS with ACU-RITE 203 3X (K) DRO, X, Y & Z Powerfeeds 698118
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $38,785.99
$30,361
As low as $600.84/mo
View Details
Jet JTM-2 Mill With Newall DP500 DRO With X-Axis Powerfeeds 692194 at Elite Metal Tools
Jet JTM-2 Mill With Newall DP500 DRO With X-Axis Powerfeeds 692194
  • Certified Meehanite® castings
  • Heavy duty splined motor drive
  • Internal coolant tank built into base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $20,406.53
$15,766
As low as $312.00/mo
View Details
Jet JTM-949EVS Mill With 3-Axis Acu-Rite 203 DRO (Knee) With X and Y-Axis Powerfeeds 690527 at Elite Metal Tools
Jet JTM-949EVS Mill With 3-Axis Acu-Rite 203 DRO (Knee) With X and Y-Axis Powerfeeds 690527
  • Automatic oiler releases 3 to 6 cc/cy of lubrication every 30 minutes
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $33,245.07
$26,353
As low as $521.52/mo
View Details
Jet MT050, 1/2 Ton Two Speed Electric Trolley 3-Phase 230V 140183 at Elite Metal Tools
Jet MT050, 1/2 Ton Two Speed Electric Trolley 3-Phase 230V 140183
  • Heavy-Duty motor puts out up to 0.8HP making it the strongest in it's class
  • Two speeds reduces bump firing to while still allowing high speed movement of materials
  • Indoor and Outdoor use with IP-55 rating for trolley and IP-65 rating for the pendant
  • Expanded flange capacity kits are available
  • TAA approved
MSRP: $3,930.29
$2,255
As low as $73.28/mo
View Details
Jet JTM-949EVS Mill With Acu-Rite 203 DRO With X and Y-Axis Powerfeeds and Air Powered Drawbar 690523 at Elite Metal Tools
Jet JTM-949EVS Mill With Acu-Rite 203 DRO With X and Y-Axis Powerfeeds and Air Powered Drawbar 690523
  • Automatic oiler releases 3 to 6 cc/cy of lubrication every 30 minutes
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $34,731.72
$27,395
As low as $542.14/mo
View Details
Jet JTM-1254VS with ACU-RITE 203 3X (K) DRO, X & Y Powerfeeds & Air Power Drawbar 698058 at Elite Metal Tools
Jet JTM-1254VS with ACU-RITE 203 3X (K) DRO, X & Y Powerfeeds & Air Power Drawbar 698058
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $39,461.72
$30,850
As low as $610.52/mo
View Details
Jet JTM-1254RVS with ACU-RITE 203 3X (Q) DRO, X & Y Powerfeeds & Air Power Drawbar 698123 at Elite Metal Tools
Jet JTM-1254RVS with ACU-RITE 203 3X (Q) DRO, X & Y Powerfeeds & Air Power Drawbar 698123
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $40,137.45
$31,338
As low as $620.17/mo
View Details
Jet GH-1880ZX With ACU-RITE 303 DRO With Taper Attachment and Collet Closer 321599 at Elite Metal Tools
Jet GH-1880ZX With ACU-RITE 303 DRO With Taper Attachment and Collet Closer 321599
  • Articulating LED work lamp
  • Centrally located controls with jog button
  • Electronic Chuck Key Holder
  • Five position automatic carriage stop increases productivity
  • Full length splash guard and coolant return
MSRP: $86,491.45
$66,395
As low as $1,313.95/mo
View Details
Jet JAT-103, 1/2" Impact Wrench 505103 at Elite Metal Tools
Jet JAT-103, 1/2" Impact Wrench 505103
  • Adjustable power regulator for variable forward power
  • Aluminum construction
  • Lightweight aluminum construction
  • Lightweight aluminum construction reduces weight
  • Twin Hammer Impact Mechanism
MSRP: $329.99
$236
View Details
Jet ETM-949 Mill with X, Y-Axis JET Powerfeeds and USA Made Air Draw Bar 894106 at Elite Metal Tools
Jet ETM-949 Mill with X, Y-Axis JET Powerfeeds and USA Made Air Draw Bar 894106
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $35,880.45
$28,259
As low as $559.24/mo
View Details
Jet JTM-1254VS with ACU-RITE 203 3X (K) DRO, X Powerfeed & Air Power Drawbar 698056 at Elite Metal Tools
Jet JTM-1254VS with ACU-RITE 203 3X (K) DRO, X Powerfeed & Air Power Drawbar 698056
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $37,704.80
$29,579
As low as $585.36/mo
View Details

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.