JET

  • Layout
Jet JTM-1 Mill With ACU-RITE 203 DRO 690244 at Elite Metal Tools
Jet JTM-1 Mill With ACU-RITE 203 DRO 690244
  • Heavy duty splined motor drive
  • Internal coolant tank built into base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
  • Precision bored and honed milling head
MSRP: $21,082.26
$16,255
As low as $321.68/mo
View Details
Jet Lathe Guard for JET 1640EVS, 1840EVS, & 1840DVR Lathes 719002 at Elite Metal Tools
Jet Lathe Guard for JET 1640EVS, 1840EVS, & 1840DVR Lathes 719002
  • Fits JET 1640EVS, 1840EVS, and 1840DVR Lathes
MSRP: $229.67
$225
View Details
Jet TS500-230-010,5-Ton Two Speed Electric Chain Hoist 3-Phase 10' Lift, MT500 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 6ft 140127K at Elite Metal Tools
Jet TS500-230-010,5-Ton Two Speed Electric Chain Hoist 3-Phase 10' Lift, MT500 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 6ft 140127K
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
  • 5 Pocket Chain Sprocket provides reduced vibration, smoother operation, and reduced chain wear during long lifting or lowering of loads
MSRP: $21,922.99
$12,182
As low as $395.91/mo
View Details
Jet EVS-949 Mill with 2-Axis ACU-RITE 203 DRO and X-Axis JET Powerfeed and USA Made Air Draw Bar 894311 at Elite Metal Tools
Jet EVS-949 Mill with 2-Axis ACU-RITE 203 DRO and X-Axis JET Powerfeed and USA Made Air Draw Bar 894311
  • Patented vari-disc key provides up to 10 times the wear resistance than aluminum or brass keys
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
MSRP: $44,597.07
$34,564
As low as $684.02/mo
View Details
Jet JET — Heat Resistant Dust Collection Hose, 3 in dia x 8 ft length, max 130 degrees 414720 at Elite Metal Tools
Jet JET — Heat Resistant Dust Collection Hose, 3 in dia x 8 ft length, max 130 degrees 414720
  • Flexible
  • For temperatures up to 130 degrees F
  • 8 ft length
  • Hose dia 3 in.
MSRP: $378.39
$335
View Details
Jet E-1440VS With ACU-RITE 203 DRO 892453 at Elite Metal Tools
Jet E-1440VS With ACU-RITE 203 DRO 892453
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Inverter drive system provides infinitely variable spindle speeds
MSRP: $34,326.26
$27,135
As low as $537.00/mo
View Details
Jet JTM-1254RVS with ACU-RITE 203 3X (K) DRO, X,Y&Z Powerfeeds & Air Power Drawbar 698119 at Elite Metal Tools
Jet JTM-1254RVS with ACU-RITE 203 3X (K) DRO, X,Y&Z Powerfeeds & Air Power Drawbar 698119
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
  • Spindle brake for rapid stopping of the spindle
MSRP: $41,218.53
$32,120
As low as $635.65/mo
View Details
Jet JAT-920 Riveter 505921 at Elite Metal Tools
Jet JAT-920 Riveter 505921
  • 3/16" mild steel capacity
  • Heavy-duty construction for continuous production
  • Includes 3/16", 5/32", 1/8" and 3/32" nose pieces
  • Maximum pulling load of 1,940 pounds for increased versatility
  • Quick-release air valve increases safety
MSRP: $371.79
$260
View Details
Jet JET — Replacement Blade,-1" x .035" x 130" x 8/12VT for HBS-1018W 414310 at Elite Metal Tools
Jet JET — Replacement Blade,-1" x .035" x 130" x 8/12VT for HBS-1018W 414310
  • Carbon steel
  • 8/12VT
  • 1" x .035" x 130"
$192
View Details
Jet JTM-1050VS2 Mill With 3-Axis ACU-RITE 203 DRO (Quill) and X-Axis Powerfeed 690158 at Elite Metal Tools
Jet JTM-1050VS2 Mill With 3-Axis ACU-RITE 203 DRO (Quill) and X-Axis Powerfeed 690158
  • Adjustable gibs throughout
  • Chrome lead screws on X and Y axis
  • Chrome-plated motor shaft with bearing support at end
  • Hardened and ground square vertical knee ways and cross ways
  • Heavy duty motor drive
MSRP: $28,042.07
$21,775
As low as $430.92/mo
View Details
Jet JTM-4VS-1 With Newall DP700 DRO 692087 at Elite Metal Tools
Jet JTM-4VS-1 With Newall DP700 DRO 692087
  • Adjustable gibs throughout
  • Heavy duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $22,703.99
$17,428
As low as $344.90/mo
View Details
Jet E-1340VS With Newall DP700 DRO 892419 at Elite Metal Tools
Jet E-1340VS With Newall DP700 DRO 892419
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Inverter drive system provides infinitely variable spindle speeds
MSRP: $30,542.26
$23,592
As low as $466.88/mo
View Details
Jet EVS-949 Mill with 2-Axis Newall DP700 DRO and X, Y-Axis JET Powerfeeds and USA Made Air Draw Bar 894355 at Elite Metal Tools
Jet EVS-949 Mill with 2-Axis Newall DP700 DRO and X, Y-Axis JET Powerfeeds and USA Made Air Draw Bar 894355
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $45,475.53
$35,200
As low as $696.60/mo
View Details
Jet EVS-949 Mill with 3-Axis Newall DP700 (Quill) DRO and X, Y-Axis JET Powerfeeds 894361 at Elite Metal Tools
Jet EVS-949 Mill with 3-Axis Newall DP700 (Quill) DRO and X, Y-Axis JET Powerfeeds 894361
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $44,056.53
$34,173
As low as $676.28/mo
View Details
Jet E-1340VS With Taper Attachment and Collet Closer 892402 at Elite Metal Tools
Jet E-1340VS With Taper Attachment and Collet Closer 892402
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Inverter drive system provides infinitely variable spindle speeds
MSRP: $33,920.80
$26,842
As low as $531.20/mo
View Details
Jet MT100, 1- Ton Two Speed Electric Trolley 3-Phase 230V 140185 at Elite Metal Tools
Jet MT100, 1- Ton Two Speed Electric Trolley 3-Phase 230V 140185
  • Heavy-Duty motor puts out up to 0.8HP making it the strongest in it's class
  • TAA Approved
  • Two speeds reduces bump firing to while still allowing high speed movement of materials
  • Indoor and Outdoor use with IP-55 rating for trolley and IP-65 rating for the pendant
  • Expanded flange capacity kits are available
MSRP: $4,162.39
$2,375
As low as $77.18/mo
View Details
Jet JTM-1254RVS with 3-Axis ACU-RITE MILLPOWER CNC with Air Power Drawbar 691945 at Elite Metal Tools
Jet JTM-1254RVS with 3-Axis ACU-RITE MILLPOWER CNC with Air Power Drawbar 691945
  • 12.1" High resolution display (1024 x 768) with 3D graphics
  • 3-D Contouring, ability to import and run G-code files from CAD/CAM programs
  • Adjustable gibs throughout
  • Automatic Lubrication every 180 minutes with a flow of 3-6cc reduces maintenance
  • Available offline software
MSRP: $72,977.07
$56,231
As low as $1,112.81/mo
View Details
Jet EVS-949 Mill with 2-Axis ACU-RITE 203 DRO and X, Y-Axis JET Powerfeeds and USA Made Air Draw Bar 894313 at Elite Metal Tools
Jet EVS-949 Mill with 2-Axis ACU-RITE 203 DRO and X, Y-Axis JET Powerfeeds and USA Made Air Draw Bar 894313
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $46,218.80
$36,876
As low as $729.77/mo
View Details
Jet JET — Bundling Kit for ECB-1422V Band Saw 891161 at Elite Metal Tools
Jet JET — Bundling Kit for ECB-1422V Band Saw 891161
MSRP: $918.93
$820
As low as $26.65/mo
View Details
Jet JCT-1600, Benchtop Sand Rammer 550600 at Elite Metal Tools
Jet JCT-1600, Benchtop Sand Rammer 550600
  • All Steel cylinder housing for increased durability
  • Fast powerful blows for compacting small, medium, and large sand molds
  • Front end seal protects the piston from excessive dirt and debris extending tool life
  • Heavy-Duty, industry proven valve design
  • Backed by the industry leading 2-Year Warranty
MSRP: $985.59
$645
As low as $20.96/mo
View Details
Jet JTM-1050VS2 Mill With ACU-RITE 203 DRO With X and Y-Axis Powerfeeds 690214 at Elite Metal Tools
Jet JTM-1050VS2 Mill With ACU-RITE 203 DRO With X and Y-Axis Powerfeeds 690214
  • Adjustable gibs throughout
  • Chrome lead screws on X and Y axis
  • Chrome-plated motor shaft with bearing support at end
  • Hardened and ground square vertical knee ways and cross ways
  • Heavy duty motor drive
MSRP: $30,947.72
$24,690
As low as $488.61/mo
View Details
Jet JTM-4VS Mill With 3-Axis Newall DP700 DRO (Knee) With X, Y and Z-Axis Powerfeeds and Power Draw Bar 690094 at Elite Metal Tools
Jet JTM-4VS Mill With 3-Axis Newall DP700 DRO (Knee) With X, Y and Z-Axis Powerfeeds and Power Draw Bar 690094
  • Adjustable gibs throughout
  • Heavy-duty spindle brake
  • Heavy-duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
MSRP: $31,082.80
$27,785
As low as $549.86/mo
View Details
Jet JET — Replacement Bimetal Band Saw Blade, 1" X .035" X 144" (4/6T) for EHB-1018VM/H Band Saw 891097 at Elite Metal Tools
Jet JET — Replacement Bimetal Band Saw Blade, 1" X .035" X 144" (4/6T) for EHB-1018VM/H Band Saw 891097
  • Bimetal
  • 4/6T
  • 1" X .035" X 144"
MSRP: $245.95
$237
View Details
Jet JET — Heat Resistant Dust Collection Hose, 4 in dia x 2.5M length, Max 130 degrees 414710 at Elite Metal Tools
Jet JET — Heat Resistant Dust Collection Hose, 4 in dia x 2.5M length, Max 130 degrees 414710
  • Flexible
  • For temperatures up to 130 degrees F
  • 2.5M length
  • Hose dia 4 in.
MSRP: $371.57
$330
View Details

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.