JET

  • Layout
Jet 1/2-Ton Hand Chain Hoist with 10' Lift | S90-050-10 101900 at Elite Metal Tools
Jet 1/2-Ton Hand Chain Hoist with 10' Lift | S90-050-10 101900
  • Grade 80 black oxide coated load chain for added durability
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
  • Needle bearings support the load sheave to increase efficiency and promote smooth operation
MSRP: $296
$199
View Details
Jet 3SS-3C-15, 3-Ton Electric Chain Hoist 3-Phase 15' Lift 331500 at Elite Metal Tools
Jet 3SS-3C-15, 3-Ton Electric Chain Hoist 3-Phase 15' Lift 331500
  • All steel construction
  • NEMA 4X compliant push button control pendants
  • Durable powder coat finish
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
  • Limit Switches- Upper and lower limiting switches increase safety by preventing the load chain from over traveling
MSRP: $7,585
$4,839.99
As low as $157.29/mo
View Details
Jet GH-2680ZH With ACU-RITE 203 DRO 321863 at Elite Metal Tools
Jet GH-2680ZH With ACU-RITE 203 DRO 321863
  • 12" 3 Jaw scroll chuck with top reversing jaws
  • 2 Steady rests with roller bearings
  • Bed ways are induction hardened and ground for durability
  • E-Stop on Carriage for added safety
  • Electronic Chuck Key Holder
MSRP: $61,078.57
$49,789
As low as $985.32/mo
View Details
Jet GH-1640ZX With ACU-RITE 203 DRO 321475 at Elite Metal Tools
Jet GH-1640ZX With ACU-RITE 203 DRO 321475
  • Articulating LED work lamp
  • Centrally located controls with jog button
  • Electronic Chuck Key Holder
  • Five position automatic carriage stop increases productivity
  • Full length splash guard and coolant return
MSRP: $39,417.14
$32,299
As low as $639.19/mo
View Details
Jet GH-1440-3 with 203 DRO and Collet Closer 323404 at Elite Metal Tools
Jet GH-1440-3 with 203 DRO and Collet Closer 323404
  • Compound and cross slide have backlash elimination
  • Front Removable Chip Tray
  • Full Length Splash Guard
  • Inch-metric dials are standard
  • Independent lead screw and feed rod
MSRP: $27,438.57
$22,599
As low as $447.23/mo
View Details
Jet GH-1860ZX With Taper Attachment 321463 at Elite Metal Tools
Jet GH-1860ZX With Taper Attachment 321463
  • Articulating LED work lamp
  • Centrally located controls with jog button
  • Electronic Chuck Key Holder
  • Five position automatic carriage stop increases productivity
  • Full length splash guard and coolant return
MSRP: $43,458.57
$35,269
As low as $697.97/mo
View Details
Jet JG-150A, 1-1/2 Ton Grip Puller with Cable 286515K at Elite Metal Tools
Jet JG-150A, 1-1/2 Ton Grip Puller with Cable 286515K
  • Double sealed ratchet brake system increases safety on the jobsite
  • Available in 3/4, 1-1/2 and 3-Ton pulling capacities
  • Designed to lift, lower, stretch, or pull heavy loads
  • Double Sealed Ratchet Brake System
  • Lightweight zinc coated steel is used to resist corrosion
MSRP: $999
$638.99
As low as $20.76/mo
View Details
Jet GH-1440ZX With Newall DP700 DRO With Collet Closer 321441 at Elite Metal Tools
Jet GH-1440ZX With Newall DP700 DRO With Collet Closer 321441
  • Articulating LED work lamp
  • Centrally located controls with jog button
  • Electronic Chuck Key Holder
  • Five position automatic carriage stop increases productivity
  • Full length splash guard and coolant return
MSRP: $42,928.57
$34,999
As low as $692.63/mo
View Details
Jet BDB-1340A With Newall DP700 DRO 321130 at Elite Metal Tools
Jet BDB-1340A With Newall DP700 DRO 321130
  • 6" 3-jaw direct mount scroll chuck with top reversing jaws
  • Automatic feeding and threading are fully interlocked
  • Carriage mounted spindle control lever
  • Centers and headstock center sleeves
  • Feed selectors travel in grooved ways
MSRP: $14,495.71
$11,899
As low as $386.71/mo
View Details
Jet GH-1440-1 Lathe with Newall DP700 DRO and Taper Attachment 323384 at Elite Metal Tools
Jet GH-1440-1 Lathe with Newall DP700 DRO and Taper Attachment 323384
  • Compound and cross slide have backlash elimination
  • Front Removable Chip Tray
  • Full Length Splash Guard
  • Gearbox provides larger threading and feed capabilities with no gear changes
  • Inch-metric dials are standard
MSRP: $29,562.86
$24,159
As low as $478.10/mo
View Details
Jet GH-1440-1 Lathe with Newall DP700 DRO and Collet Closer 323383 at Elite Metal Tools
Jet GH-1440-1 Lathe with Newall DP700 DRO and Collet Closer 323383
  • Compound and cross slide have backlash elimination
  • Front Removable Chip Tray
  • Full Length Splash Guard
  • Inch-metric dials are standard
  • Independent lead screw and feed rod
MSRP: $27,438.57
$22,599
As low as $447.23/mo
View Details
Jet JLH-300WO-10 3 Ton Lever Hoist, 10' Lift with Overload Protection 376501 at Elite Metal Tools
Jet JLH-300WO-10 3 Ton Lever Hoist, 10' Lift with Overload Protection 376501
  • All steel construction
  • Caged needle bearings support the load sheave to increase efficiency and promote smooth operation
  • Enhanced ergonomic grip allows for greater operator control and increased comfort
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
MSRP: $1,270
$831.30
As low as $27.01/mo
View Details
Jet GH-1440-3 Lathe with Newall NMS300 DRO and Taper Attachment 323417 at Elite Metal Tools
Jet GH-1440-3 Lathe with Newall NMS300 DRO and Taper Attachment 323417
  • Compound and cross slide have backlash elimination
  • Front Removable Chip Tray
  • Full Length Splash Guard
  • Inch-metric dials are standard
  • Independent lead screw and feed rod
MSRP: $26,928.57
$22,259
As low as $440.50/mo
View Details
Jet JLP-025A-5, 1/4 Ton Mini-Puller, 5' Lift 287100 at Elite Metal Tools
Jet JLP-025A-5, 1/4 Ton Mini-Puller, 5' Lift 287100
  • Cast steel safety latches are secured with Allen screws and lock nuts
  • Compact design with smaller body and lightweight design for low headroom applications and use in confined areas
  • Hooks slowly stretch to indicate an overload situation increasing jobsite safety
  • Impact resistant all steel construction for added durability and protection
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging
MSRP: $238
$169
View Details
Jet JLP-075A-15, 3/4 Ton Lever Hoist, 15' Lift 287302 at Elite Metal Tools
Jet JLP-075A-15, 3/4 Ton Lever Hoist, 15' Lift 287302
  • Grade 80 black oxide coated load chain for added durability
  • Impact resistant all steel construction for added durability and protection
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Needle bearings support the load sheave to increase efficiency and promote smooth operation
  • JET’s improved easy free chain design is a two-step, no load, free chaining system. The system permits quicker hoist positioning and take up of slack chain, and is engineered not to free chain under load
MSRP: $498
$325.38
View Details
Jet 1/4-Ton Electric Chain Hoist 1-Phase 10' Lift | JSH-550-10 110110 at Elite Metal Tools
Jet 1/4-Ton Electric Chain Hoist 1-Phase 10' Lift | JSH-550-10 110110
  • Aluminum Housing- Aluminum alloy housing decreases the weight for convenient transportation
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
  • Heat Treated Gears- Heat treated alloy steel geared drive train for long lasting durability
  • JET VOLT and SSC Series Electric Hoists and JET ET Series Electric Trolleys are not rated or designed for outdoor use or wet environments
  • Limit Switches- Upper and lower limiting switches increase safety by preventing the load chain from over traveling
MSRP: $2,950
$1,885
As low as $61.26/mo
View Details
Jet GH-1440-1 Lathe with Acu-Rite 203 DRO and Taper Attachment 323375 at Elite Metal Tools
Jet GH-1440-1 Lathe with Acu-Rite 203 DRO and Taper Attachment 323375
  • Compound and cross slide have backlash elimination
  • Front Removable Chip Tray
  • Full Length Splash Guard
  • Inch-metric dials are standard
  • Independent lead screw and feed rod
MSRP: $29,564.29
$24,099
As low as $476.91/mo
View Details
Jet PUC-3819, Resin Flat Top Utility Cart 141011 at Elite Metal Tools
Jet PUC-3819, Resin Flat Top Utility Cart 141011
  • 5 inch quiet, non-marking casters
  • Handle includes built-in storage bins for versatility
  • Industrial-duty, resin design that resists dents, chips, scratches and corrosion
  • 550 pounds of carrying capacity
  • Backed by our industry leading 2-Year Warranty
MSRP: $280
$195
View Details
Jet 3-Ton Hand Chain Hoist with 30' Lift & Overload Protection | L-100-300WO-30 207130 at Elite Metal Tools
Jet 3-Ton Hand Chain Hoist with 30' Lift & Overload Protection | L-100-300WO-30 207130
  • Double sealed ball bearings support the load sheave to increase efficiency and promote smooth operation
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
MSRP: $2,152
$1,372.99
As low as $44.62/mo
View Details
Jet JVM-836-1 Mill With Newall DP700 DRO 691173 at Elite Metal Tools
Jet JVM-836-1 Mill With Newall DP700 DRO 691173
  • Graduated scale on column
  • Hardened and ground precision table
  • Head tilts left or right
  • High precision spindle bearings
  • Large Diameter quill is chromed
MSRP: $14,954.29
$12,259
As low as $398.41/mo
View Details
Jet JVM-836-1 Mill With 3-Axis Newall DP700 DRO (Quill) 691176 at Elite Metal Tools
Jet JVM-836-1 Mill With 3-Axis Newall DP700 DRO (Quill) 691176
  • Graduated scale on column
  • Hardened and ground precision table
  • Head tilts left or right
  • High precision spindle bearings
  • Large Diameter quill is chromed
MSRP: $16,227.14
$13,259
As low as $430.91/mo
View Details
Jet GH-1440-3 Lathe with Newall DP700 DRO and Collet Closer 323412 at Elite Metal Tools
Jet GH-1440-3 Lathe with Newall DP700 DRO and Collet Closer 323412
  • Compound and cross slide have backlash elimination
  • Front Removable Chip Tray
  • Full Length Splash Guard
  • Inch-metric dials are standard
  • Independent lead screw and feed rod
MSRP: $27,438.57
$22,599
As low as $447.23/mo
View Details
Jet 2-PT, 2-Ton Heavy Duty Manual Trolley 252020 at Elite Metal Tools
Jet 2-PT, 2-Ton Heavy Duty Manual Trolley 252020
  • Built-in bumper guards on the side plates increase safety and extend trolley life
  • Complies with OSHA Regulations, ANSI / ASME B30.11 and B30.17 standards
  • Easily adjustable to wide-flange H-beams, standard I-beams, or curved track with the included spacer washers
  • Hardened large steel wheels and thicker double sealed lubricated ball bearings provide smooth movement
  • Welded heavy gauge steel frame and powder coat finish provide maximum durability and protection
MSRP: $442
$280.50
View Details
Jet JET Woodturning Carbide Hollowing Chisels Set 5PC 719902 at Elite Metal Tools
Jet JET Woodturning Carbide Hollowing Chisels Set 5PC 719902
  • JET Carbide Hollowing Chisels Set includes 3 interchangeable radius for hollowing while works on the lathe
  • Light weight extendable anodized aluminum handle. Main handle is 11" with a 10.5" extension.
  • JET Carbide Turning Tool Set is packed in a custom wood case.
  • Stainless steel shaft will not rust
  • Carbide blades have a long cutting life
MSRP: $241.99
$232
View Details

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.