JET

  • Layout
Jet SJ-10T, 10-Ton Screw Jack 441310 at Elite Metal Tools
Jet SJ-10T, 10-Ton Screw Jack 441310
  • Complies with ANSI/ASME B30.1 standards
  • Corrugated Pivoting Head
  • Corrugated pivoting head, contours to the load providing maximum surface contact
  • Heavy-duty cast bell shaped base provides a stable foundation in multiple lifting environments
  • Improved design requires less effort to lift a maximum capacity load
MSRP: $250
$175
View Details
Jet JET — 20-Piece TiN-Coated Single End Mill Set 650211 at Elite Metal Tools
Jet JET — 20-Piece TiN-Coated Single End Mill Set 650211
  • Excellent for general-purpose use as TiN provides higher lubricity for freer chip flow, reduced build-up edge formations, and catering
  • Single end TiN coated mill set
  • Square end mill type to be used for general milling applications
  • TiN (Titanium Nitride) coating provides extreme hardness and heat resistance allowing tool to run at higher speeds and feeds
  • 3/16" to 3/4" by 16ths
$199
View Details
Jet GHB-1340A With ACU-RITE 203 DRO and Taper Attachment 321123 at Elite Metal Tools
Jet GHB-1340A With ACU-RITE 203 DRO and Taper Attachment 321123
  • 6" 3-jaw direct mount chuck with top reversing jaw
  • Compound and cross slide have backlash elimination
  • Gear box gives wide inch threading and feed capabilities with no gear changes
  • Hardened and ground gears are featured in the headstock and gearbox
  • Image shown with optional bench, p/n 321443AK
MSRP: $18,677.14
$15,299
As low as $302.76/mo
View Details
Jet PBC-420CN, 4 Button Control Pendant 20' Cord 152421 at Elite Metal Tools
Jet PBC-420CN, 4 Button Control Pendant 20' Cord 152421
  • 24 volt push button controller with cable strain relief system for durability and reliability
  • 4 button controller for electric hoist or trolley feature 4-pin quick connect plugs
  • Complies with NEMA 4X standards
  • NEMA 4x-rated control pendant
  • Push button controller with cable strain relief system for durability and reliability
MSRP: $228
$165
View Details
Jet GHB-1340A With ACU-RITE 203 DRO With Taper Attachment and Collet Closer 321127 at Elite Metal Tools
Jet GHB-1340A With ACU-RITE 203 DRO With Taper Attachment and Collet Closer 321127
  • 6" 3-jaw direct mount chuck with top reversing jaw
  • Compound and cross slide have backlash elimination
  • Gear box gives wide inch threading and feed capabilities with no gear changes
  • Hardened and ground gears are featured in the headstock and gearbox
  • Image shown with optional bench, p/n 321443AK
MSRP: $22,058.99
$18,229
As low as $360.75/mo
View Details
Jet GHB-1340A With Collet Closer and Taper Attachment 321129 at Elite Metal Tools
Jet GHB-1340A With Collet Closer and Taper Attachment 321129
  • 6" 3 jaw direct mount chuck with top reversing jaws
  • Compound and cross slide have backlash elimination
  • Gear box gives wide inch threading and feed capabilities with no gear changes
  • Hardened and ground gears are featured in the headstock and gearbox
  • Image shown with optional bench, p/n 321443AK
MSRP: $18,402.86
$14,999
As low as $487.46/mo
View Details
Jet PT-2742JB, 27" x 42" 5,500 LB Capacity Pallet Truck 161008 at Elite Metal Tools
Jet PT-2742JB, 27" x 42" 5,500 LB Capacity Pallet Truck 161008
  • 2/12 inch low profile allows for easy engagement of pallets
  • Lower material in a controlled decent with either hand or foot control for operator convenience
  • Overload Protection prevents lifting loads past maximum capacity
  • Polyurethane 6-1/4 x 2 inch steer wheels for non marking of floors and quieter rolling
  • Pumps designed for any industrial environment
MSRP: $927
$597.99
As low as $19.43/mo
View Details
Jet GH-1440-1 Lathe with Newall NMS300 DRO and Taper Attachment 323388 at Elite Metal Tools
Jet GH-1440-1 Lathe with Newall NMS300 DRO and Taper Attachment 323388
  • Compound and cross slide have backlash elimination
  • Front Removable Chip Tray
  • Full Length Splash Guard
  • Inch-metric dials are standard
  • Independent lead screw and feed rod
MSRP: $27,184.29
$22,259
As low as $440.50/mo
View Details
Jet 3SS-3C-20, 3-Ton Electric Chain Hoist 3-Phase 20' Lift 332000 at Elite Metal Tools
Jet 3SS-3C-20, 3-Ton Electric Chain Hoist 3-Phase 20' Lift 332000
  • All steel construction
  • NEMA 4X compliant push button control pendants
  • Durable powder coat finish
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
  • Limit Switches- Upper and lower limiting switches increase safety by preventing the load chain from over traveling
MSRP: $7,702
$4,915
As low as $159.73/mo
View Details
Jet JET — 400 Series Quick Change Tool Post 650305 at Elite Metal Tools
Jet JET — 400 Series Quick Change Tool Post 650305
  • Maximum rigidity for chatter-free performance
  • Holders fit ALLORRIS and YUASA tool posts
  • Completely sealed for maintenance free operation
  • Change tools in seconds
  • Fits 14" - 20" swing lathes
MSRP: $954
$875
As low as $28.43/mo
View Details
Jet GH-1660ZX With ACU-RITE 303 DRO 321388 at Elite Metal Tools
Jet GH-1660ZX With ACU-RITE 303 DRO 321388
  • Articulating LED work lamp
  • Centrally located controls with jog button
  • Electronic Chuck Key Holder
  • Five position automatic carriage stop increases productivity
  • Full length splash guard and coolant return
MSRP: $40,821.43
$33,579
As low as $664.52/mo
View Details
Jet GH-1440ZX With Collet Closer 321531 at Elite Metal Tools
Jet GH-1440ZX With Collet Closer 321531
  • Articulating LED work lamp
  • Centrally located controls with jog button
  • Electronic Chuck Key Holder
  • Five position automatic carriage stop increases productivity
  • Full length splash guard and coolant return
MSRP: $35,284.29
$29,399
As low as $581.80/mo
View Details
Jet 1-Ton Electric Chain Hoist 1-Phase 15' Lift | 1SS-1C-15 111500 at Elite Metal Tools
Jet 1-Ton Electric Chain Hoist 1-Phase 15' Lift | 1SS-1C-15 111500
  • 24 volt push button controller with cable strain relief system for durability and reliability
  • All steel construction
  • NEMA 4X compliant push button control pendants
  • Durable powder coat finish
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
MSRP: $5,524
$3,520
As low as $114.40/mo
View Details
Jet GH-1660ZX With Taper Attachment 321477 at Elite Metal Tools
Jet GH-1660ZX With Taper Attachment 321477
  • Articulating LED work lamp
  • Centrally located controls with jog button
  • Electronic Chuck Key Holder
  • Five position automatic carriage stop increases productivity
  • Full length splash guard and coolant return
MSRP: $42,738.57
$34,739
As low as $687.48/mo
View Details
Jet BDB-1340A With Taper Attachment 321120 at Elite Metal Tools
Jet BDB-1340A With Taper Attachment 321120
  • 6" 3-jaw direct mount scroll chuck with top reversing jaws
  • Automatic feeding and threading are fully interlocked
  • Carriage mounted spindle control lever
  • Centers and headstock center sleeves
  • Feed selectors travel in grooved ways
MSRP: $15,035.71
$12,329
As low as $400.69/mo
View Details
Jet 2-HDT, 2-Ton Manual Trolley 262020 at Elite Metal Tools
Jet 2-HDT, 2-Ton Manual Trolley 262020
  • Built-in bumper guards on the side plates increase safety and extend trolley life
  • Complies with OSHA Regulations, ANSI / ASME B30.11 and B30.17 standards
  • Easily adjustable to wide-flange H-beams, standard I-beams, or curved track with the included spacer washers
  • Hardened steel wheels and double sealed lubricated ball bearings provide smooth movement
  • Welded all-steel frame and powder coat finish provide maximum durability and protection
MSRP: $336
$220
View Details
Jet 1-Ton Electric Chain Hoist 3-Phase 20' Lift | 1SS-3C-20 132000 at Elite Metal Tools
Jet 1-Ton Electric Chain Hoist 3-Phase 20' Lift | 1SS-3C-20 132000
  • All steel construction
  • NEMA 4X compliant push button control pendants
  • Durable powder coat finish
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
  • Limit Switches- Upper and lower limiting switches increase safety by preventing the load chain from over traveling
MSRP: $4,794
$3,062
As low as $99.51/mo
View Details
Jet 5SS-3C-20, 5-Ton Electric Chain Hoist 3-Phase 20' lift 530200 at Elite Metal Tools
Jet 5SS-3C-20, 5-Ton Electric Chain Hoist 3-Phase 20' lift 530200
  • All steel construction
  • NEMA 4X compliant push button control pendants
  • Durable powder coat finish
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
  • Limit Switches- Upper and lower limiting switches increase safety by preventing the load chain from over traveling
MSRP: $10,230
$6,528
As low as $212.16/mo
View Details
Jet JG-300, 3 Ton Grip Puller Without Cable 286530 at Elite Metal Tools
Jet JG-300, 3 Ton Grip Puller Without Cable 286530
  • A double sealed ratchet brake system increases safety on the jobsite
  • Available in 3/4, 1-1/2 and 3-Ton pulling capacities
  • Designed to lift, lower, stretch or pull heavy loads
  • Double Sealed Ratchet Brake System
  • Lightweight zinc coated steel is used to resist corrosion
MSRP: $1,072
$669
As low as $21.74/mo
View Details
Jet PUC-41 x 26, Resin Utility Cart 141014 at Elite Metal Tools
Jet PUC-41 x 26, Resin Utility Cart 141014
  • One piece handle and top shelve for long lasting durability
  • 5 inch quiet, non-marking casters
  • Industrial-duty, resin design that resists dents, chips, scratches and corrosion
  • Rounded edges reduce damage to property and personnel
  • Backed by our industry leading 2-Year Warranty
MSRP: $298
$199
View Details
Jet 3-Ton Hand Chain Hoist with 15' Lift | S90-300-15 101941 at Elite Metal Tools
Jet 3-Ton Hand Chain Hoist with 15' Lift | S90-300-15 101941
  • Grade 80 black oxide coated load chain for added durability
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
  • Needle bearings support the load sheave to increase efficiency and promote smooth operation
MSRP: $788
$524
As low as $17.03/mo
View Details
Jet JET — 300 Series Quick Change Tool Post 650300 at Elite Metal Tools
Jet JET — 300 Series Quick Change Tool Post 650300
  • Maximum rigidity for chatter-free performance
  • Holders fit ALLORRIS and YUASA tool posts
  • Completely sealed for maintenance free operation
  • Change tools in seconds
  • Fits 13"-18" swing lathes
MSRP: $739.99
$659
As low as $21.41/mo
View Details
Jet GH-1440ZX With Newall DP700 DRO 321470 at Elite Metal Tools
Jet GH-1440ZX With Newall DP700 DRO 321470
  • Articulating LED work lamp
  • Centrally located controls with jog button
  • Electronic Chuck Key Holder
  • Five position automatic carriage stop increases productivity
  • Full length splash guard and coolant return
MSRP: $37,474.29
$30,689
As low as $607.33/mo
View Details
Jet 1-1/2-Ton Aluminum Hand Chain Hoist with 30ft of Lift | AL100-150-30 133124 at Elite Metal Tools
Jet 1-1/2-Ton Aluminum Hand Chain Hoist with 30ft of Lift | AL100-150-30 133124
  • Extra large hand chain opening for side chain pulling
  • Sealed housing to provide extra protection against the elements
  • Complies with ANSI/ASME B30.16 and HAST-2 Standards
  • Cast steel safety latches
  • Dual pawl Weston style brake
MSRP: $1,161
$739.99
As low as $24.04/mo
View Details

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.