JET

  • Layout
Jet 10-Ton Hand Chain Hoist with 30' Lift & Overload Protection | L-100-1000WO-30 209130 at Elite Metal Tools
Jet 10-Ton Hand Chain Hoist with 30' Lift & Overload Protection | L-100-1000WO-30 209130
  • Double sealed ball bearings support the load sheave to increase efficiency and promote smooth operation
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
MSRP: $6,205.99
$3,525
As low as $114.56/mo
View Details
Jet 1-Ton Hand Chain Hoist with 20' Lift | S90-100-20 101912 at Elite Metal Tools
Jet 1-Ton Hand Chain Hoist with 20' Lift | S90-100-20 101912
  • Grade 80 black oxide coated load chain for added durability
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
  • Needle bearings support the load sheave to increase efficiency and promote smooth operation
MSRP: $447.99
$285
View Details
Jet 1/2-Ton Hand Chain Hoist with 10' Lift | S90-050-10 101900 at Elite Metal Tools
Jet 1/2-Ton Hand Chain Hoist with 10' Lift | S90-050-10 101900
  • Grade 80 black oxide coated load chain for added durability
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
  • Needle bearings support the load sheave to increase efficiency and promote smooth operation
MSRP: $310.99
$225
View Details
Jet GH-1440-3 with 203 DRO and Taper Attachment 323405 at Elite Metal Tools
Jet GH-1440-3 with 203 DRO and Taper Attachment 323405
  • Compound and cross slide have backlash elimination
  • Front Removable Chip Tray
  • Full Length Splash Guard
  • Inch-metric dials are standard
  • Independent lead screw and feed rod
MSRP: $37,102.79
$28,985
As low as $573.61/mo
View Details
Jet GH-1860ZX With Taper Attachment 321463 at Elite Metal Tools
Jet GH-1860ZX With Taper Attachment 321463
  • Articulating LED work lamp
  • Centrally located controls with jog button
  • Electronic Chuck Key Holder
  • Five position automatic carriage stop increases productivity
  • Full length splash guard and coolant return
MSRP: $54,057.09
$42,495
As low as $840.97/mo
View Details
Jet GH-1440B with ACU-RITE 203 DRO & Taper Attachment 323444 at Elite Metal Tools
Jet GH-1440B with ACU-RITE 203 DRO & Taper Attachment 323444
  • Compound and cross slide have backlash adjustment
  • Emergency stop within easy reach of the Operator
  • Enclosed gearbox design provides smooth, quiet operation
  • Gearbox gives wide range of inch & metric threading & feed capabilities with few gear changes
  • Spindle Spider available for ease of turning Gun barrels
MSRP: $31,082.79
$24,650
As low as $487.82/mo
View Details
Jet GH-1860ZX With ACU-RITE 203 DRO With Taper Attachment and Collet Closer 321505 at Elite Metal Tools
Jet GH-1860ZX With ACU-RITE 203 DRO With Taper Attachment and Collet Closer 321505
  • Articulating LED work lamp
  • Centrally located controls with jog button
  • Electronic Chuck Key Holder
  • Five position automatic carriage stop increases productivity
  • Full length splash guard and coolant return
MSRP: $66,035.69
$50,995
As low as $1,009.19/mo
View Details
Jet GH-1440-1 Lathe with Taper Attachment and Collet Closer 323373 at Elite Metal Tools
Jet GH-1440-1 Lathe with Taper Attachment and Collet Closer 323373
  • Compound and cross slide have backlash elimination
  • Front Removable Chip Tray
  • Full Length Splash Guard
  • Inch-metric dials are standard
  • Independent lead screw and feed rod
MSRP: $36,242.79
$28,365
As low as $561.34/mo
View Details
Jet GH-1440B with Newall DP500 & Taper Attachment 323448 at Elite Metal Tools
Jet GH-1440B with Newall DP500 & Taper Attachment 323448
  • Compound and cross slide have backlash adjustment
  • Emergency stop within easy reach of the Operator
  • Enclosed gearbox design provides smooth, quiet operation
  • Gearbox gives wide range of inch & metric threading & feed capabilities with few gear changes
  • Spindle Spider available for ease of turning Gun barrels
MSRP: $24,645.09
$19,220
As low as $380.36/mo
View Details
Jet GH-1860ZX With ACU-RITE 303 DRO 321590 at Elite Metal Tools
Jet GH-1860ZX With ACU-RITE 303 DRO 321590
  • Articulating LED work lamp
  • Centrally located controls with jog button
  • Electronic Chuck Key Holder
  • Five position automatic carriage stop increases productivity
  • Full length splash guard and coolant return
MSRP: $52,582.79
$41,295
As low as $817.22/mo
View Details
Jet GH-1440-3 with 203 DRO ,Collet Closer and Taper Attachment 323408 at Elite Metal Tools
Jet GH-1440-3 with 203 DRO ,Collet Closer and Taper Attachment 323408
  • Compound and cross slide have backlash elimination
  • Front Removable Chip Tray
  • Full Length Splash Guard
  • Inch-metric dials are standard
  • Independent lead screw and feed rod
MSRP: $41,525.69
$32,165
As low as $636.54/mo
View Details
Jet GH-1440-1 Lathe with Newall NMS300 DRO, Collet Closer, and Taper Attachment 323389 at Elite Metal Tools
Jet GH-1440-1 Lathe with Newall NMS300 DRO, Collet Closer, and Taper Attachment 323389
  • Compound and cross slide have backlash elimination
  • Front Removable Chip Tray
  • Full Length Splash Guard
  • Inch-metric dials are standard
  • Independent lead screw and feed rod
MSRP: $40,542.79
$31,455
As low as $622.49/mo
View Details
Jet JG-300, 3 Ton Grip Puller Without Cable 286530 at Elite Metal Tools
Jet JG-300, 3 Ton Grip Puller Without Cable 286530
  • A double sealed ratchet brake system increases safety on the jobsite
  • Available in 3/4, 1-1/2 and 3-Ton pulling capacities
  • Designed to lift, lower, stretch or pull heavy loads
  • Double Sealed Ratchet Brake System
  • Lightweight zinc coated steel is used to resist corrosion
MSRP: $1,253.99
$795
As low as $25.83/mo
View Details
Jet BDB-1340A With ACU-RITE VUE DRO With Collet Closer 321108 at Elite Metal Tools
Jet BDB-1340A With ACU-RITE VUE DRO With Collet Closer 321108
  • 6" 3-jaw direct mount scroll chuck with top reversing jaws
  • Automatic feeding and threading are fully interlocked
  • Carriage mounted spindle control lever
  • Centers and headstock center sleeves
  • Change gears to allow metric threading
MSRP: $19,042.79
$14,550
As low as $472.87/mo
View Details
Jet GH-1880ZX With Taper Attachment 321486 at Elite Metal Tools
Jet GH-1880ZX With Taper Attachment 321486
  • Articulating LED work lamp
  • Centrally located controls with jog button
  • Electronic Chuck Key Holder
  • Five position automatic carriage stop increases productivity
  • Full length splash guard and coolant return
MSRP: $60,568.59
$46,995
As low as $930.03/mo
View Details
Jet JET — 300 Series Quick Change Tool Post 650300 at Elite Metal Tools
Jet JET — 300 Series Quick Change Tool Post 650300
  • Maximum rigidity for chatter-free performance
  • Holders fit ALLORRIS and YUASA tool posts
  • Completely sealed for maintenance free operation
  • Change tools in seconds
  • Fits 13"-18" swing lathes
MSRP: $909.09
$815
As low as $26.48/mo
View Details
Jet JG-150A, 1-1/2 Ton Grip Puller with Cable 286515K at Elite Metal Tools
Jet JG-150A, 1-1/2 Ton Grip Puller with Cable 286515K
  • Double sealed ratchet brake system increases safety on the jobsite
  • Available in 3/4, 1-1/2 and 3-Ton pulling capacities
  • Designed to lift, lower, stretch, or pull heavy loads
  • Double Sealed Ratchet Brake System
  • Lightweight zinc coated steel is used to resist corrosion
MSRP: $1,163.99
$755
As low as $24.53/mo
View Details
Jet GH-1440-3 Lathe with Newall DP700 DRO and Collet Closer 323412 at Elite Metal Tools
Jet GH-1440-3 Lathe with Newall DP700 DRO and Collet Closer 323412
  • Compound and cross slide have backlash elimination
  • Front Removable Chip Tray
  • Full Length Splash Guard
  • Inch-metric dials are standard
  • Independent lead screw and feed rod
MSRP: $34,399.99
$27,040
As low as $535.12/mo
View Details
Jet JET — 16-Piece CS-5C Collet Set for Lathes and Grinders 650014 at Elite Metal Tools
Jet JET — 16-Piece CS-5C Collet Set for Lathes and Grinders 650014
  • 5-C Collet Set
  • Precision ground components
  • 1/8" - 1-/16" by 1/16" increments
  • Does not include rack or case
MSRP: $368.59
$325
View Details
Jet 1/2-Ton Electric Chain Hoist 1-Phase 15' Lift | 1/2SS-1C-15 121150 at Elite Metal Tools
Jet 1/2-Ton Electric Chain Hoist 1-Phase 15' Lift | 1/2SS-1C-15 121150
  • 24 volt push button controller with cable strain relief system for durability and reliability
  • All steel construction
  • NEMA 4X compliant push button control pendants
  • Durable powder coat finish
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
MSRP: $5,218.99
$2,935
As low as $95.38/mo
View Details
Jet PUC_41x17, Resin Utility Cart 141012 at Elite Metal Tools
Jet PUC_41x17, Resin Utility Cart 141012
  • Ergonomic Handle helps operator stand taller when pushing cart
  • 5 inch quiet, non-marking casters
  • Handle includes built-in storage bins to hold smaller materials
  • 550 pounds of carrying capacity
  • Backed by our industry leading 2-Year Warranty
MSRP: $309.99
$215
View Details
Jet JHJ-17-1/2, 17-1/2-Ton Hydraulic Bottle Jack 453317 at Elite Metal Tools
Jet JHJ-17-1/2, 17-1/2-Ton Hydraulic Bottle Jack 453317
  • Complies with ANSI/ASME B30.1 and PALD-1 Standard
  • Heavy-duty bases are electrically welded providing a stable platform
  • Hydraulic system is protected from damage by internal by-pass mechanism
  • Industrial-duty construction permits use in extreme climates
  • Lifting, pushing, spreading, bending, pressing or straightening capabilities
MSRP: $354.99
$245
View Details
Jet 5SS-3C-15, 5-Ton Electric Chain Hoist 3-Phase 15' lift 531500 at Elite Metal Tools
Jet 5SS-3C-15, 5-Ton Electric Chain Hoist 3-Phase 15' lift 531500
  • All steel construction
  • NEMA 4X compliant push button control pendants
  • Durable powder coat finish
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
  • Limit Switches- Upper and lower limiting switches increase safety by preventing the load chain from over traveling
MSRP: $11,319.99
$6,395
As low as $207.83/mo
View Details
Jet PUC-3819, Resin Flat Top Utility Cart 141011 at Elite Metal Tools
Jet PUC-3819, Resin Flat Top Utility Cart 141011
  • 5 inch quiet, non-marking casters
  • Handle includes built-in storage bins for versatility
  • Industrial-duty, resin design that resists dents, chips, scratches and corrosion
  • 550 pounds of carrying capacity
  • Backed by our industry leading 2-Year Warranty
MSRP: $326.99
$225
View Details

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.