JET

  • Layout
Jet PTW-2042B, 20" x 42" 6,600 LB Capacity Pallet Truck 141171 at Elite Metal Tools
Jet PTW-2042B, 20" x 42" 6,600 LB Capacity Pallet Truck 141171
  • Lower material in a controlled decent with either hand or foot control for operator convenience
  • Overload Protection prevents lifting loads past maximum capacity
  • Polyurethane 6-1/4 x 2 inch steer wheels for non marking of floors and quieter rolling
  • Pump designed so that cylinder will not extend beyond maximum height
  • Pumps designed for any industrial environment
MSRP: $1,170.39
$758
As low as $24.63/mo
View Details
Jet JAT-411, 1/8" Right Angle Pencil Die Grinder 505411 at Elite Metal Tools
Jet JAT-411, 1/8" Right Angle Pencil Die Grinder 505411
  • 5' long whip hose for easy maneuverability
  • 90° head to easily access hard to reach areas
  • Comes with two wrenches for easy accessory changes
  • Kevlar rotor vanes to extend life and reduce maintenance
  • Lightweight aluminum housing
MSRP: $340.99
$247
View Details
Jet 10" Sliding Dual Bevel Compound Miter Saw 707210 at Elite Metal Tools
Jet 10" Sliding Dual Bevel Compound Miter Saw 707210
  • Adjustable left and right fence and extension tables provide greater versatility and support
  • Change miter angles quickly with the single motion thumb lever
  • Dual bevel capability with up front controls to maximize cutting of compound angles
  • Durable compact die cast aluminum construction
  • Dust port with dust bag and 2-1/2” adapter to maximize dust collection
MSRP: $770.32
$709
As low as $23.04/mo
View Details
Jet J-41002 2 x 42 Bench Belt Grinder & Disc Sander 577004 at Elite Metal Tools
Jet J-41002 2 x 42 Bench Belt Grinder & Disc Sander 577004
  • Abrasive belt unit removes material and finishes at the same time, allowing the operator to get into small openings, plus handle odd shapes and angles
  • Adjustable dust deflector and dust chute
  • Allows for sanding, grinding, or finishing of outside, curves or odd shaped work pieces on the belt
  • Cast iron construction
  • Deluxe miter gauge that turns and locks for common angles, 45° both left and right
MSRP: $905.40
$819.50
As low as $26.63/mo
View Details
Jet J-7020, 10" x 16" Horizontal Bandsaw 414472 at Elite Metal Tools
Jet J-7020, 10" x 16" Horizontal Bandsaw 414472
  • Adjustable blade guide with six contact point system that utilizes cam follower bearings mounted on eccentric shafts on both sides of the blades
  • Adjustable Material Stop
  • Cast iron blade wheels
  • Heavy-duty transmission utilizes hardened and ground gears operating in an oil bath
  • Patented 3-Jaw vise with rapid action moveable jaw for faster set up
MSRP: $9,905.93
$7,865
As low as $255.61/mo
View Details
Jet J-A5816, 15" Variable Speed Floor Model Drill Press 115V1Ph 354550 at Elite Metal Tools
Jet J-A5816, 15" Variable Speed Floor Model Drill Press 115V1Ph 354550
  • 1/2" Drill chuck and arbor included
  • 3" column diameter for maximum head support
  • 6" stroke for deep hole application
  • Full bearing support on quill for maximum spindle stiffness
  • Handwheel speed adjustment of 400 to 5,000 RPM
MSRP: $3,581.26
$2,914
As low as $94.70/mo
View Details
Jet GHD-20T, 20" Gear Head Tapping Drill Press 230V, 3Ph 354022 at Elite Metal Tools
Jet GHD-20T, 20" Gear Head Tapping Drill Press 230V, 3Ph 354022
  • Easily accessible table raiser
  • Head tilts left or right
  • Heavy-duty design allows a variety of precision drilling and tapping applications
  • Integrated tapping and reversing controls
  • Large production table and T-slotted base
MSRP: $8,419.39
$6,795
As low as $220.83/mo
View Details
Jet JTM-1050EVS2/230 Electronic Variable Speed Vertical Milling Machine 230V 3Ph 691600 at Elite Metal Tools
Jet JTM-1050EVS2/230 Electronic Variable Speed Vertical Milling Machine 230V 3Ph 691600
  • Automatic oiler releases 3 to 6 cc/cy of lubrication every 30 minutes
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $25,677.07
$20,390
As low as $403.51/mo
View Details
Jet IBGB-436VS 8-Inch Variable Speed Industrial Grinder and 4 x 36 Belt Sander 577436 at Elite Metal Tools
Jet IBGB-436VS 8-Inch Variable Speed Industrial Grinder and 4 x 36 Belt Sander 577436
  • CSA/CUS Certified
  • Industrial strength construction for demanding usage
  • Innovative safety guarding surrounding the sanding belt
  • Large Eye Safety Shields
  • Rubber sealed bearings for years of maintenance free sanding on idle wheel
MSRP: $1,527.12
$1,291
As low as $41.95/mo
View Details
Jet ECB-1422V, 14 x 22" Semi-Automatic Variable Speed Dual Column Bandsaw 5HP, 230/460V, 3Ph" 891160 at Elite Metal Tools
Jet ECB-1422V, 14 x 22" Semi-Automatic Variable Speed Dual Column Bandsaw 5HP, 230/460V, 3Ph" 891160
  • Heavy duty construction reduces vibration and deflection
  • Easy frame height adjustment
  • Blade tension gauge helps to ensure the blade is in the correct cutting position
  • Mechanical variable speed drive system for easy speed changes
  • Semi-auto on saw bow lifting and hydraulic vise
MSRP: $43,691.66
$34,445
As low as $681.66/mo
View Details
Jet BG-379-3, 3" x 79" Belt Grinder 220V 3Ph 414615 at Elite Metal Tools
Jet BG-379-3, 3" x 79" Belt Grinder 220V 3Ph 414615
  • 3 extra 80 grit Silicon Carbide belts included
  • 3" Round connector and hose clamp for ease of mounting to a metalworking dust collection system
  • Advanced belt tracking with vented front wheel fixed in place for rigidity when grinding on the wheel radius
  • Fully assembled for immediate use
  • Hinged top cover opens for access to grind large pieces using the entire length of the belt
MSRP: $3,621.85
$2,915
As low as $94.73/mo
View Details
Jet JWBG-8NW 8"WW Bench Grinder without Wheels 726101 at Elite Metal Tools
Jet JWBG-8NW 8"WW Bench Grinder without Wheels 726101
  • Built-in spark arrester
  • Durable cast iron wheel covers
  • Easily adjustable, oversized shields
  • Heavy-duty, machined flanges keep grinding wheel true and reduce run out
  • Oversized tool rests with integrated angle indicator
$537
As low as $17.45/mo
View Details
Jet 3SS-1C-10, 3-Ton Electric Chain Hoist 1-Phase 10' Lift 311000 at Elite Metal Tools
Jet 3SS-1C-10, 3-Ton Electric Chain Hoist 1-Phase 10' Lift 311000
  • 24 volt push button controller with cable strain relief system for durability and reliability
  • All steel construction
  • NEMA 4X compliant push button control pendants
  • Durable powder coat finish
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
MSRP: $9,865.89
$5,573
As low as $181.12/mo
View Details
Jet JAT-800A Lever Lock Needle Scaler 505802 at Elite Metal Tools
Jet JAT-800A Lever Lock Needle Scaler 505802
  • Easily convert tool from needle scaler to flux chipper
  • Heavy-duty, heat-treated barrels and pistons for reliability and durability
  • Includes one set of 19 needles
  • Lever lock retainer permits quick tool change
  • Backed by the industry leading 2-Year Warranty
MSRP: $291.49
$219
View Details
On Sale
Jet GHD-20PF, 20" Gear Head Drill Press With Power Down feed 230V, 3Ph 354024 at Elite Metal Tools
Jet GHD-20PF, 20" Gear Head Drill Press With Power Down feed 230V, 3Ph 354024
  • Easily accessible table raiser
  • Head tilts left or right
  • Large production table and T-slotted base
  • Three power downfeed rates
MSRP: $9,014.05
Was: $7,245
Now: $5,071.50
As low as $164.82/mo
View Details
Jet DC-1100VX-BK Dust Collector, 1.5HP 1PH 115/230V, 30-Micron Bag Filter Kit 708657K at Elite Metal Tools
Jet DC-1100VX-BK Dust Collector, 1.5HP 1PH 115/230V, 30-Micron Bag Filter Kit 708657K
  • Eliminates premature filter clogging for sustained performance
  • High air velocity (CFM) design stands up to any competitive specifications
  • Industrial controls designed for years of trouble-free use
  • Permanently lubricated, totally enclosed, fan-cooled motors are rated for continuous-duty
  • Quick-connect collection bags with elastic band for fast, easy installation and removal
MSRP: $851.39
$765
As low as $24.86/mo
View Details
Jet J-3230, 5" x 8" Horizontal Bandsaw 414453 at Elite Metal Tools
Jet J-3230, 5" x 8" Horizontal Bandsaw 414453
  • Adjustable blade guides with side eccentric shaft with ball bearings with rear-ball bearings
  • Adjustable Material Stop
  • Blade drive is a steel, heat treated worm driving a bronze worm gear in an oil bath
  • Blade guides with side eccentric shaft with ball bearings
  • Fully adjustable hydraulic downfeed system
MSRP: $2,148.73
$1,779
As low as $57.81/mo
View Details
Jet HBS-916EVS, 9" x 16" EVS (Electronic Variable Speed) Horizontal Bandsaw 424469 at Elite Metal Tools
Jet HBS-916EVS, 9" x 16" EVS (Electronic Variable Speed) Horizontal Bandsaw 424469
  • Adjustable Material Stop
  • Built-in, self-propelled blade brush extends blade life
  • Carbide blade guides feature parallel double-row ball bearing support
  • Coolant is distributed through the blade guides
  • Electronically controlled blade speed from 82 - 330 SFPM
MSRP: $9,324.80
$7,445
As low as $241.96/mo
View Details
Jet Dust Collector, 1.5HP 1PH 115/230V, 5-Micron Bag Filter Kit | DC-1100VX-5M 708658K at Elite Metal Tools
Jet Dust Collector, 1.5HP 1PH 115/230V, 5-Micron Bag Filter Kit | DC-1100VX-5M 708658K
  • Eliminates premature filter clogging for sustained performance
  • High air velocity (CFM) design stands up to any competitive specifications
  • Includes four casters for maneuverability and total portability
  • Industrial controls designed for years of trouble-free use
  • Permanently lubricated, totally enclosed, fan-cooled motors are rated for continuous-duty
MSRP: $932.46
$825
As low as $26.81/mo
View Details
Jet J-7060, 12" x 20" Semi-Automatic Horizontal Bandsaw 414476 at Elite Metal Tools
Jet J-7060, 12" x 20" Semi-Automatic Horizontal Bandsaw 414476
  • Adjustable blade guide with six contact point system that utilizes cam follower bearings mounted on eccentric shafts on both sides of the blades
  • Adjustable Material Stop
  • Cast iron blade wheels
  • Downfeed system is controlled by a dual system of counterbalance springs working with a hydraulic cylinder
  • Heavy-duty transmission utilizes hardened and ground gears operating in an oil bath
MSRP: $20,541.72
$15,999
As low as $316.62/mo
View Details
Jet JTM-2 Step Pulley Milling Machine 115/230V 1Ph 690089 at Elite Metal Tools
Jet JTM-2 Step Pulley Milling Machine 115/230V 1Ph 690089
  • Certified Meehanite® castings
  • Heavy duty splined motor drive
  • Internal coolant tank built into base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $16,217.07
$12,784
As low as $415.48/mo
View Details
Jet EGH-1740 With ACU-RITE 303 DRO With Taper Attachment 892508 at Elite Metal Tools
Jet EGH-1740 With ACU-RITE 303 DRO With Taper Attachment 892508
  • 4-Position Carriage Stop
  • Anti-Float design eliminates backlash in the cross slide
  • Enclosed coolant system contains excess coolant for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Full Length Splash Guard
MSRP: $63,652.26
$50,268
As low as $994.80/mo
View Details
Jet JET Carter Style Bearing Blade Guides for 14" Bandsaws 708127 at Elite Metal Tools
Jet JET Carter Style Bearing Blade Guides for 14" Bandsaws 708127
  • Can be used with blades from 3/16" to 1-1/4" wide at speeds up to 5000 SFPM to handle most cutting projects
  • Double sealed bearings keep dust out to prolong guide life
  • Durable dual bearing system is micro-adjustable above and below the table
  • Mounting Studs and Hardware
  • Three bearing contact points maximize support while minimizing friction for longer guide and blade life
MSRP: $351.33
$320
View Details
Jet JET — Replacement Fence Kit for 14 x 14 in Band Saw 714102 at Elite Metal Tools
Jet JET — Replacement Fence Kit for 14 x 14 in Band Saw 714102
  • Compatible with Jet 14 x 14 in Band Saw
  • Shop the Jet Parts Store for all your replacement part needs
MSRP: $256.73
$247
View Details

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.