JET

  • Layout
Jet JET — Replacement Blade, 1-5/16" x 0.043" x 155-1/2 4/6VT 413401 at Elite Metal Tools
Jet JET — Replacement Blade, 1-5/16" x 0.043" x 155-1/2 4/6VT 413401
  • Replacement Blade for Jet Saws
  • Shop the Jet store for all your replacement part needs
MSRP: $540.53
$525
As low as $17.06/mo
View Details
Jet 1/4-Ton Hand Chain Hoist with 20' Lift & Overload Protection | L-100-250WO-20 101250 at Elite Metal Tools
Jet 1/4-Ton Hand Chain Hoist with 20' Lift & Overload Protection | L-100-250WO-20 101250
  • Double sealed ball bearings support the load sheave to increase efficiency and promote smooth operation
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
MSRP: $685.29
$493
View Details
Jet JTM-1254VS with NEWALL DP700 3X (Q) DRO, X & Y Powerfeeds & Air Power Drawbar 698081 at Elite Metal Tools
Jet JTM-1254VS with NEWALL DP700 3X (Q) DRO, X & Y Powerfeeds & Air Power Drawbar 698081
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $40,137.45
$31,833
As low as $629.97/mo
View Details
Jet JLP-025A-15,1/4 Ton Mini-Puller, 15' Lift 287102 at Elite Metal Tools
Jet JLP-025A-15,1/4 Ton Mini-Puller, 15' Lift 287102
  • Cast steel safety latches are secured with Allen screws and lock nuts
  • Compact design with smaller body and lightweight design for low headroom applications and use in confined areas
  • Hooks slowly stretch to indicate an overload situation increasing jobsite safety
  • Impact resistant all steel construction for added durability and protection
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging
MSRP: $389.39
$265
View Details
Jet ETM-949 Mill with X, Y-Axis JET Powerfeeds and USA Made Air Draw Bar 894106 at Elite Metal Tools
Jet ETM-949 Mill with X, Y-Axis JET Powerfeeds and USA Made Air Draw Bar 894106
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $35,880.45
$28,705
As low as $568.07/mo
View Details
Jet JLH-25-10, 1/4-Ton Compact Lever Hoist With 10' Lift 181210 at Elite Metal Tools
Jet JLH-25-10, 1/4-Ton Compact Lever Hoist With 10' Lift 181210
  • Alloy Steel Hooks- Industrial rated hooks rotate 360 degrees for easy rigging. Hooks slowly stretch to indicate an overload situation increasing jobsite safety
  • Cast steel safety latches
  • Compact design with smaller body and lightweight design for low headroom applications and use in confined areas
  • Grade 100 Load Chain- Corrosive resistant grade 100 load chain is stronger than grade 80 load chain extending the life of the hoist
  • Heat Treated Load Plates
MSRP: $487.29
$315
View Details
Jet JLH-150WO-10, 1-1/2 Ton, Lever Hoist with 10' Lift with Overload Protection 376301 at Elite Metal Tools
Jet JLH-150WO-10, 1-1/2 Ton, Lever Hoist with 10' Lift with Overload Protection 376301
  • All steel construction
  • Caged needle bearings support the load sheave to increase efficiency and promote smooth operation
  • Enhanced ergonomic grip allows for greater operator control and increased comfort
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
MSRP: $959.19
$632
As low as $20.54/mo
View Details
Jet MT050, 1/2 Ton Two Speed Electric Trolley 3-Phase 230V 140183 at Elite Metal Tools
Jet MT050, 1/2 Ton Two Speed Electric Trolley 3-Phase 230V 140183
  • Heavy-Duty motor puts out up to 0.8HP making it the strongest in it's class
  • Two speeds reduces bump firing to while still allowing high speed movement of materials
  • Indoor and Outdoor use with IP-55 rating for trolley and IP-65 rating for the pendant
  • Expanded flange capacity kits are available
  • TAA approved
MSRP: $3,930.29
$2,294
As low as $74.55/mo
View Details
Jet JTM-1050VS2 Mill With 3-Axis ACU-RITE 203 DRO (Knee) With X and Y-Axis Powerfeeds 690256 at Elite Metal Tools
Jet JTM-1050VS2 Mill With 3-Axis ACU-RITE 203 DRO (Knee) With X and Y-Axis Powerfeeds 690256
  • Adjustable gibs throughout
  • Chrome lead screws on X and Y axis
  • Chrome-plated motor shaft with bearing support at end
  • Hardened and ground square vertical knee ways and cross ways
  • Heavy duty motor drive
MSRP: $29,190.80
$22,972
As low as $454.61/mo
View Details
Jet JLH-50-15, 1/2-Ton Compact Lever Hoist With 15' Lift 181515 at Elite Metal Tools
Jet JLH-50-15, 1/2-Ton Compact Lever Hoist With 15' Lift 181515
  • Alloy Steel Hooks- Industrial rated hooks rotate 360 degrees for easy rigging. Hooks slowly stretch to indicate an overload situation increasing jobsite safety
  • Cast steel safety latches
  • Compact design with smaller body and lightweight design for low headroom applications and use in confined areas
  • Grade 100 Load Chain- Corrosive resistant grade 100 load chain is stronger than grade 80 load chain extending the life of the hoist
  • Heat Treated Load Plates
MSRP: $585.19
$419
View Details
Jet ETM-949 Mill with 3-Axis ACU-RITE 303 (Quill) DRO and X-Axis JET Powerfeed and USA Made Air Draw Bar 894139 at Elite Metal Tools
Jet ETM-949 Mill with 3-Axis ACU-RITE 303 (Quill) DRO and X-Axis JET Powerfeed and USA Made Air Draw Bar 894139
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $42,164.53
$33,322
As low as $659.44/mo
View Details
Jet JLH-150-20PSH 1-1/2 Ton Lever Hoist, 20' Lift with Overload Protection & Shipyard Hooks 376803 at Elite Metal Tools
Jet JLH-150-20PSH 1-1/2 Ton Lever Hoist, 20' Lift with Overload Protection & Shipyard Hooks 376803
  • All steel construction
  • Caged needle bearings support the load sheave to increase efficiency and promote smooth operation
  • Enhanced ergonomic grip allows for greater operator control and increased comfort
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
MSRP: $1,134.09
$740
As low as $24.05/mo
View Details
Jet JLP-075A-20, 3/4 Ton Lever Hoist with 20' Lift 287303 at Elite Metal Tools
Jet JLP-075A-20, 3/4 Ton Lever Hoist with 20' Lift 287303
  • Grade 80 black oxide coated load chain for added durability
  • Impact resistant all steel construction for added durability and protection
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • JET’s improved easy free chain design is a two-step, no load, free chaining system. The system permits quicker hoist positioning and take up of slack chain, and is engineered not to free chain under load
  • NEW! Redesigned ergonomic grip allows for greater operator control and increased comfort
MSRP: $602.79
$429
View Details
Jet JLH-600WO-20 6 Ton Lever Hoist, 20' Lift with Overload Protection 376603 at Elite Metal Tools
Jet JLH-600WO-20 6 Ton Lever Hoist, 20' Lift with Overload Protection 376603
  • All steel construction
  • Caged needle bearings support the load sheave to increase efficiency and promote smooth operation
  • Enhanced ergonomic grip allows for greater operator control and increased comfort
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
MSRP: $2,968.89
$1,775
As low as $57.68/mo
View Details
Jet JET —Replacement Charcoal Filters for IAFS3000 Industrial Air Filtration System 415155 at Elite Metal Tools
Jet JET —Replacement Charcoal Filters for IAFS3000 Industrial Air Filtration System 415155
MSRP: $581.12
$545
As low as $17.71/mo
View Details
Jet JAT-651, 1,800 RPM, 1/4" Screwdriver 505651 at Elite Metal Tools
Jet JAT-651, 1,800 RPM, 1/4" Screwdriver 505651
  • Ergonomically Designed Grip
  • Fast-action chuck permits the changing of standard 1/4" hex bits
  • Heavy-duty ball bearing construction increases durability
  • Variable-speed trigger for precise speed control
  • Backed by the industry leading 2-Year Warranty
MSRP: $389.39
$269
View Details
Jet JTM-1254RVS with X, Y & Z Powerfeeds & Air Power Drawbar 698089 at Elite Metal Tools
Jet JTM-1254RVS with X, Y & Z Powerfeeds & Air Power Drawbar 698089
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $35,947.99
$28,755
As low as $569.06/mo
View Details
Jet JTM-1254VS with NEWALL DP700 3X (K) DRO, X Powerfeed & Air Power Drawbar 698073 at Elite Metal Tools
Jet JTM-1254VS with NEWALL DP700 3X (K) DRO, X Powerfeed & Air Power Drawbar 698073
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $37,569.72
$29,946
As low as $592.63/mo
View Details
Jet JTM-1050VS2 Mill With 3-Axis Newall DP700 DRO (Quill) With X, Y and Z-Axis Powerfeeds And Power Draw Bar 690234 at Elite Metal Tools
Jet JTM-1050VS2 Mill With 3-Axis Newall DP700 DRO (Quill) With X, Y and Z-Axis Powerfeeds And Power Draw Bar 690234
  • Adjustable gibs throughout
  • Chrome lead screws on X and Y axis
  • Chrome-plated motor shaft with bearing support at end
  • Hardened and ground square vertical knee ways and cross ways
  • Heavy duty motor drive
MSRP: $33,582.99
$27,017
As low as $534.66/mo
View Details
Jet JTM-1050EVS2/230 Mill With Newall DP700 DRO With X-Axis Powerfeed 690634 at Elite Metal Tools
Jet JTM-1050EVS2/230 Mill With Newall DP700 DRO With X-Axis Powerfeed 690634
  • Automatic oiler releases 3 to 6 cc/cy of lubrication at adjustable time intervals
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $32,434.26
$26,173
As low as $517.96/mo
View Details
Jet JLH Series 3/4 Ton Lever Hoist, 20' Lift with Overload Protection 376103 at Elite Metal Tools
Jet JLH Series 3/4 Ton Lever Hoist, 20' Lift with Overload Protection 376103
  • All steel construction
  • Caged needle bearings support the load sheave to increase efficiency and promote smooth operation
  • Enhanced ergonomic grip allows for greater operator control and increased comfort
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
MSRP: $868.99
$588
As low as $19.11/mo
View Details
Jet JET — Replacement Blade, Bimetal, 1.33 x 0.043 x 192-1/8 5/8T for ECB-1422V 891165 at Elite Metal Tools
Jet JET — Replacement Blade, Bimetal, 1.33 x 0.043 x 192-1/8 5/8T for ECB-1422V 891165
  • 1.33" Width
  • 0.043" Thickness
  • 192-1/8" Length
  • 5/8T
$415
View Details
Jet ETM-949 Mill with 3-Axis ACU-RITE 303 (Quill) DRO and X, Y, Z-Axis JET Powerfeeds 894142 at Elite Metal Tools
Jet ETM-949 Mill with 3-Axis ACU-RITE 303 (Quill) DRO and X, Y, Z-Axis JET Powerfeeds 894142
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $42,164.53
$33,322
As low as $659.44/mo
View Details
Jet ETM-949 Mill with 3-Axis Newall DP700 (Knee) DRO and X-Axis JET Powerfeed and USA Made Air Draw Bar 894167 at Elite Metal Tools
Jet ETM-949 Mill with 3-Axis Newall DP700 (Knee) DRO and X-Axis JET Powerfeed and USA Made Air Draw Bar 894167
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $42,434.80
$33,521
As low as $663.38/mo
View Details

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.