JET

  • Layout
Jet JTM-4VS-1 Mill With Newall DP700 DRO With X-Axis Powerfeed 691087 at Elite Metal Tools
Jet JTM-4VS-1 Mill With Newall DP700 DRO With X-Axis Powerfeed 691087
  • Adjustable gibs throughout
  • Heavy duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $24,731.07
$19,695
As low as $389.76/mo
View Details
Jet JTM-1050VS2 Mill With X-Axis Powerfeed 690120 at Elite Metal Tools
Jet JTM-1050VS2 Mill With X-Axis Powerfeed 690120
  • Adjustable gibs throughout
  • Chrome lead screws on X and Y axis
  • Chrome-plated motor shaft with bearing support at end
  • Hardened and ground square vertical knee ways and cross ways
  • Heavy duty motor drive
MSRP: $24,663.53
$19,645
As low as $388.77/mo
View Details
Jet 15-Ton Hand Chain Hoist with 15' Lift & Overload Protection | L-100-1500WO-15 109115 at Elite Metal Tools
Jet 15-Ton Hand Chain Hoist with 15' Lift & Overload Protection | L-100-1500WO-15 109115
  • Double sealed ball bearings support the load sheave to increase efficiency and promote smooth operation
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
MSRP: $6,880.49
$3,999
As low as $129.96/mo
View Details
Jet JTM-1254VS with NEWALL DP700 DRO X, Y & Z Powerfeeds & Air Power Drawbar 698072 at Elite Metal Tools
Jet JTM-1254VS with NEWALL DP700 DRO X, Y & Z Powerfeeds & Air Power Drawbar 698072
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $40,272.53
$31,932
As low as $631.93/mo
View Details
Jet E-1440VS With Taper Attachment and Collet Closer 892452 at Elite Metal Tools
Jet E-1440VS With Taper Attachment and Collet Closer 892452
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Inverter drive system provides infinitely variable spindle speeds
MSRP: $35,542.53
$28,457
As low as $563.16/mo
View Details
Jet ETM-949 Mill with 3-Axis ACU-RITE 203 (Knee) DRO and X, Y-Axis JET Powerfeeds and USA Made Air Draw Bar 894127 at Elite Metal Tools
Jet ETM-949 Mill with 3-Axis ACU-RITE 203 (Knee) DRO and X, Y-Axis JET Powerfeeds and USA Made Air Draw Bar 894127
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $43,786.26
$34,514
As low as $683.03/mo
View Details
Jet JTM-2 Mill With 3-Axis ACU-RITE 203 DRO (Knee) With X-Axis Powerfeed 690095 at Elite Metal Tools
Jet JTM-2 Mill With 3-Axis ACU-RITE 203 DRO (Knee) With X-Axis Powerfeed 690095
  • Certified Meehanite® castings
  • Large Diameter quill is chromed
  • Precision bored and honed milling head
MSRP: $22,974.26
$17,902
As low as $354.28/mo
View Details
Jet JMD-18PFN Mill/Drill With NEWALL DP700 DRO 350128 at Elite Metal Tools
Jet JMD-18PFN Mill/Drill With NEWALL DP700 DRO 350128
  • 1/2” Drill chuck, chuck arbor
  • 360° head swivel
  • Adjustable carbide facemill
  • Base taper allows for easier clean up
  • Easy to read internal depth gauge
MSRP: $10,068.07
$7,995
As low as $259.83/mo
View Details
Jet JET — Flood Coolant System for 230/460V 3-Phase Milling Machines A619 at Elite Metal Tools
Jet JET — Flood Coolant System for 230/460V 3-Phase Milling Machines A619
  • Air and coolant line connections are encased in braided metal wire.
  • One gallon tank is made of enamel paint finished metal with removable corrosion resistant inner liner.
  • Flood coolant system for 230/460V 3 Ph machines
MSRP: $810.80
$724
As low as $23.53/mo
View Details
Jet E-1236VS With ACU-RITE 303 CSS DRO With Collet Closer 892317 at Elite Metal Tools
Jet E-1236VS With ACU-RITE 303 CSS DRO With Collet Closer 892317
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Integrated locking tool cabinet in stand on 12" Lathe
MSRP: $26,082.53
$20,688
As low as $409.41/mo
View Details
Jet E-1236VS With ACU-RITE 203 DRO 892303 at Elite Metal Tools
Jet E-1236VS With ACU-RITE 203 DRO 892303
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Integrated locking tool cabinet in stand on 12" Lathe
MSRP: $27,298.80
$21,581
As low as $427.08/mo
View Details
Jet Stand Extension for Jet JWL-1015, 1015VS Lathe 719103A at Elite Metal Tools
Jet Stand Extension for Jet JWL-1015, 1015VS Lathe 719103A
MSRP: $229.67
$215
View Details
Jet JTM-4VS-1 With Newall DP700 DRO 692087 at Elite Metal Tools
Jet JTM-4VS-1 With Newall DP700 DRO 692087
  • Adjustable gibs throughout
  • Heavy duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $22,703.99
$17,703
As low as $350.34/mo
View Details
Jet JTM-1 Mill With 3-Axis Newall DP700 DRO (Knee) 691196 at Elite Metal Tools
Jet JTM-1 Mill With 3-Axis Newall DP700 DRO (Knee) 691196
  • Heavy duty splined motor drive
  • Internal coolant tank built into base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
  • Precision bored and honed milling head
MSRP: $22,433.72
$17,504
As low as $346.40/mo
View Details
Jet 1/2-Ton Electric Chain Hoist 1-Phase 10' Lift | 1/2SS-1C-10 121100 at Elite Metal Tools
Jet 1/2-Ton Electric Chain Hoist 1-Phase 10' Lift | 1/2SS-1C-10 121100
  • 24 volt push button controller with cable strain relief system for durability and reliability
  • All steel construction
  • NEMA 4X compliant push button control pendants
  • Durable powder coat finish
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
MSRP: $5,597.89
$3,276
As low as $106.47/mo
View Details
Jet Floor Stand (with Switch and Miter Gauge 737004 at Elite Metal Tools
Jet Floor Stand (with Switch and Miter Gauge 737004
  • Floor Stand includes the power switch and miter gauge
  • Included miter gauge results in more accurate cuts at a variety of angles
  • Integrated mobile base allows for maximum mobility.
  • On board tool storage for increased efficiency when routing
  • Power Switch allows for power to be controlled away from the router
MSRP: $554.06
$519
As low as $16.86/mo
View Details
Jet TS100-460-015,1-Ton Two Speed Electric Chain Hoist 3-Phase 15' Lift, MT100-4 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 11ft 144005K at Elite Metal Tools
Jet TS100-460-015,1-Ton Two Speed Electric Chain Hoist 3-Phase 15' Lift, MT100-4 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 11ft 144005K
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
MSRP: $13,520.09
$7,682
As low as $249.66/mo
View Details
Jet Coolant Tray For ELITE Mills 894093 at Elite Metal Tools
Jet Coolant Tray For ELITE Mills 894093
  • Accessory for JET ELITE Mills
MSRP: $1,148.72
$999
As low as $32.46/mo
View Details
Jet PUC-31x17, Resin Utility Cart 140018 at Elite Metal Tools
Jet PUC-31x17, Resin Utility Cart 140018
  • Compatible with Knaack Model CA-02 Cart Armour
  • Handle includes built-in storage bins for versatility
  • Industrial-duty, resin design that resists dents, chips, scratches and corrosion
  • Quiet, non-marking 5 inch casters for increased maneuverability
  • Rounded edges reduce damage to property and personnel
MSRP: $378.39
$243
View Details
Jet GH-26120ZH With Taper Attachment 321893 at Elite Metal Tools
Jet GH-26120ZH With Taper Attachment 321893
  • 12" 3 Jaw scroll chuck with top reversing jaws
  • 2 Steady rests with roller bearings
  • Bed ways are induction hardened and ground for durability
  • E-Stop on Carriage for added safety
  • Electronic Chuck Key Holder
MSRP: $92,707.99
$71,695
As low as $1,418.84/mo
View Details
Jet JTM-1254RVS with ACU-RITE 203 DRO, X Powerfeed 698108 at Elite Metal Tools
Jet JTM-1254RVS with ACU-RITE 203 DRO, X Powerfeed 698108
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $34,191.07
$27,465
As low as $543.53/mo
View Details
Jet JET — 52 Piece CK38 Clamping Kit for 1/2 in T-Slots 660038 at Elite Metal Tools
Jet JET — 52 Piece CK38 Clamping Kit for 1/2 in T-Slots 660038
  • 58-pc Clamping Kit with Tray for 1/2" T-slot
  • Storage tray can be wall-mounted or machine-mounted
  • Three complete sets to choose from
  • Twenty four studs, four each
  • Includes 6 T-slot nuts, 6 flange nuts, 4 coupling nuts, 6 step blocks, 6 step clamps, 24 studs (4 ea: 3, 4, 5, 6, 7 and 8 in lengths)
MSRP: $263.55
$239
View Details
Jet ETM-949 Mill with Y-Axis JET Powerfeed 894101 at Elite Metal Tools
Jet ETM-949 Mill with Y-Axis JET Powerfeed 894101
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $30,677.45
$24,064
As low as $476.22/mo
View Details
Jet TS100-230-020,1-Ton Two Speed Electric Chain Hoist 3-Phase 20' Lift, MT100 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 16ft 140238K at Elite Metal Tools
Jet TS100-230-020,1-Ton Two Speed Electric Chain Hoist 3-Phase 20' Lift, MT100 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 16ft 140238K
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
MSRP: $13,628.99
$7,740
As low as $251.55/mo
View Details

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.