JET

  • Layout
Jet JMD-45GH Geared Head Square Column Mill/Drill with Newall DP700 2-Axis DRO & X-Powerfeed 351151 at Elite Metal Tools
Jet JMD-45GH Geared Head Square Column Mill/Drill with Newall DP700 2-Axis DRO & X-Powerfeed 351151
  • Calibrated fine down feed built in
  • CSA/CUS Certified
  • Easy to read internal depth gauge
  • Full power to the cutting tools through 6 speed geared head
  • Heavy-duty design allows for a variety of precision drilling applications
MSRP: $16,081.99
$12,685
As low as $412.26/mo
View Details
Jet HBS-56S, 5" x 6" Horizontal Mitering Bandsaw 414457 at Elite Metal Tools
Jet HBS-56S, 5" x 6" Horizontal Mitering Bandsaw 414457
  • Adjustable Material Stop
  • Ball bearing supported blade wheel
  • Deluxe enclosed stand with wheels and handle for easy movement
  • Fully adjustable hydraulic downfeed system
  • Mitering head swivels to cut any angle 0° - 60° while the work piece remains secured
MSRP: $1,864.93
$1,556
As low as $50.57/mo
View Details
Jet J-4002 1 x 42 Bench Belt and Disc Sander 577003 at Elite Metal Tools
Jet J-4002 1 x 42 Bench Belt and Disc Sander 577003
  • Abrasive belt unit removes material and finishes at the same time, allowing the operator to get into small openings, plus handle odd shapes and angles
  • Adjustable dust deflector and dust chute
  • Cast iron construction
  • Deluxe miter gauge that turns and locks for common angles, 45° both left and right
  • Heavy-duty steel base and rubber feet
MSRP: $858.10
$771
As low as $25.05/mo
View Details
Jet PUC-37x25, Resin Utility Cart 140019 at Elite Metal Tools
Jet PUC-37x25, Resin Utility Cart 140019
  • Compatible with Knaack Model CA-05 Cart Armour
  • Handle includes built-in storage bins for versatility
  • Industrial-duty, resin design that resists dents, chips, scratches and corrosion
  • Quiet, non-marking 5 inch casters for increased maneuverability
  • Rounded edges reduce damage to property and personnel
MSRP: $415.79
$280
View Details
Jet 2-Ton Electric Chain Hoist 1-Phase 20' Lift | BLVS200-020 104046 at Elite Metal Tools
Jet 2-Ton Electric Chain Hoist 1-Phase 20' Lift | BLVS200-020 104046
  • Comes standard with Wireless Controller that can infinitely adjust speed from creep to 4ft/min with speed dial and max of 41ft/min in high speed
  • TAA Approved
  • Single phase 120V plug enables use in all areas and the Permanent Magnet Brushless Motor has the lowest required starting current available at just 10amp.
  • Overload protection using slip clutch system to protect hoist from loads over rated capacities
  • DC Brushless motor designed for a longer lifespan than normal Electric Hoist motors reducing maintenance costs
MSRP: $15,551.79
$8,748
As low as $284.31/mo
View Details
Jet IBGB-436 8-Inch Industrial Grinder and 4 x 36 Belt Sander 578436 at Elite Metal Tools
Jet IBGB-436 8-Inch Industrial Grinder and 4 x 36 Belt Sander 578436
  • CSA/CUS Certified
  • Industrial strength construction for demanding usage
  • Innovative safety guarding surrounding the sanding belt
  • Large Eye Safety Shields
  • Rubber sealed bearings for years of maintenance free sanding on idle wheel
MSRP: $1,175.67
$1,033
As low as $33.57/mo
View Details
Jet 315mm Ferrous Manual Cold Saw | CS-315 414227 at Elite Metal Tools
Jet 315mm Ferrous Manual Cold Saw | CS-315 414227
  • Blade drive reduction gearbox operates in an oil bath for increased durability
  • Cast iron frame
  • Flood coolant system
  • Flood coolant system with a 1-1/3 Gallon coolant reservoir and pump with flow control system extends blade life
  • Fully adjustable material depth stop for sawing repeatability and increased production
MSRP: $4,581.27
$3,699
As low as $120.21/mo
View Details
Jet JMD-45VSPFT Variable Speed Geared Head Square Column Mill/Drill with Power Downfeed & Newall DP500 2-Axis DRO & X-Axis Powerfeed 351165 at Elite Metal Tools
Jet JMD-45VSPFT Variable Speed Geared Head Square Column Mill/Drill with Power Downfeed & Newall DP500 2-Axis DRO & X-Axis Powerfeed 351165
  • Easy to read internal depth gauge
  • Full power to the cutting tools through Variable Speed geared head
  • Heavy-duty design allows for a variety of precision drilling applications
  • Mill Drill Stand, p/n 350045, shown in some images, is optional
  • Milling table allows for movement
MSRP: $18,379.45
$14,378
As low as $467.28/mo
View Details
Jet 12" 4-Jaw Chuck D1-6 For Elite 17" Geared Head Lathes 892158 at Elite Metal Tools
Jet 12" 4-Jaw Chuck D1-6 For Elite 17" Geared Head Lathes 892158
  • 4 independent one-piece jaws
  • Cast iron construction
  • Specifically designed for Elite EGH-1740 and EGH-1760 lathes
MSRP: $2,256.86
$1,850
As low as $60.12/mo
View Details
On Sale
Jet J-4400A, 12" Industrial Disc Finishing Machine 115/230V 1Ph 414602 at Elite Metal Tools
Jet J-4400A, 12" Industrial Disc Finishing Machine 115/230V 1Ph 414602
  • Easy to read scale shows exact degree of table tilt
  • Fully machined balanced disc runs vibration free
  • Heavy duty one piece steel stand
  • Large cast iron slotted table
  • Optimum speed of 1960 RPM, which is ideal for both metal and wood finishing
MSRP: $2,500.07
Was: $2,075
Now: $1,203.50
As low as $39.11/mo
View Details
Jet EGH-1740 With Taper Attachment and Collet Closer 892502 at Elite Metal Tools
Jet EGH-1740 With Taper Attachment and Collet Closer 892502
  • 4-Position Carriage Stop
  • Anti-Float design eliminates backlash in the cross slide
  • Enclosed coolant system contains excess coolant for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Full Length Splash Guard
MSRP: $59,597.99
$47,289
As low as $935.84/mo
View Details
Jet JTM-4VS-1 Mill With ACU-RITE 203 DRO With X-Axis Powerfeed 690179 at Elite Metal Tools
Jet JTM-4VS-1 Mill With ACU-RITE 203 DRO With X-Axis Powerfeed 690179
  • Adjustable gibs throughout
  • Heavy duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $24,325.72
$19,397
As low as $383.86/mo
View Details
Jet 8 x 13 Variable Speed Bandsaw | EHB-8VS 891015 at Elite Metal Tools
Jet 8 x 13 Variable Speed Bandsaw | EHB-8VS 891015
  • Adjustable Material Stop
  • Automatic blade shut off switch stops the sawing process
  • Built-in, self-propelled chip brush prevents chip build up in blade guides
  • Integrated pressurized wash hose for easy machine cleaning
  • Large handwheel with blade tensioning gauge accurately measures blade pressure
MSRP: $8,784.26
$7,041
As low as $228.83/mo
View Details
Jet JET — RF Remote control for Dust Collector, 230V 708636D at Elite Metal Tools
Jet JET — RF Remote control for Dust Collector, 230V 708636D
  • Complete unit
  • Simply plug in your dust collector to the transmitter for instant remote control, no wiring needed
  • Works with all Duct Collectors up to 3 HP (230V ONLY)
$199
View Details
Jet EVS-949 Mill with 3-Axis ACU-RITE 203 (Knee) DRO and X, Y-Axis JET Powerfeeds 894326 at Elite Metal Tools
Jet EVS-949 Mill with 3-Axis ACU-RITE 203 (Knee) DRO and X, Y-Axis JET Powerfeeds 894326
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $43,786.26
$34,514
As low as $683.03/mo
View Details
Jet Parallel Clamp Framing Kit (2 - 24 x 40) 70411 at Elite Metal Tools
Jet Parallel Clamp Framing Kit (2 - 24 x 40) 70411
  • 2" Bench Dogs can be used to maximize clamp stability anywhere and their aluminum design makes them built for extended durability and stability
  • Acme threaded handle turns easily and applies continuous pressure
  • Cross Doc™ framing blocks can be used for gluing rectangular frames at four points safely and securely
  • Ergonomic SUMOGRIP® handles integrated with soft grip for added comfort and increased torque
  • Four mounting holes guarantee a permanent setup
$500
As low as $16.25/mo
View Details
Jet JMD-40GH Geared Head Mill/Drill with Newall DP500 2-Axis DRO & X-Powerfeed 351145 at Elite Metal Tools
Jet JMD-40GH Geared Head Mill/Drill with Newall DP500 2-Axis DRO & X-Powerfeed 351145
  • Calibrated fine down feed built in
  • CSA/CUS Certified
  • Easy to read internal depth gauge
  • Full power to the cutting tools through 6 speed geared head
  • Heavy-duty design allows for a variety of precision drilling applications
MSRP: $12,906.07
$10,210
As low as $331.82/mo
View Details
Jet JVM-836-3 Mill With X-Axis Powerfeed 690174 at Elite Metal Tools
Jet JVM-836-3 Mill With X-Axis Powerfeed 690174
  • Graduated scale on column
  • Hardened and ground precision table
  • Head tilts left or right
  • High precision spindle bearings
  • Large Diameter quill is chromed
MSRP: $15,811.72
$12,486
As low as $405.79/mo
View Details
Jet JET — Folding Infeed/Outfeed Tables for JWDS-2250/2244OSC 723551 at Elite Metal Tools
Jet JET — Folding Infeed/Outfeed Tables for JWDS-2250/2244OSC 723551
  • Heavy duty tables fold for better storage
  • Tables are adjustable to level with precision
  • Tables assist with longer boards
  • Hold up to 35 lbs each
  • Steel
MSRP: $371.57
$328
View Details
Jet XACTA 2 50" Rail Set, X2-50RS 708951Z at Elite Metal Tools
Jet XACTA 2 50" Rail Set, X2-50RS 708951Z
$482
View Details
Jet EVS-949 Mill with 3-Axis ACU-RITE 303 (Knee) DRO and Servo X, Y, Z-Axis Powerfeeds and USA Air Powered Draw Bar 894416 at Elite Metal Tools
Jet EVS-949 Mill with 3-Axis ACU-RITE 303 (Knee) DRO and Servo X, Y, Z-Axis Powerfeeds and USA Air Powered Draw Bar 894416
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $54,057.07
$43,218
As low as $855.28/mo
View Details
Jet J-7040M, 10" x 16" Horizontal Mitering Bandsaw 414475 at Elite Metal Tools
Jet J-7040M, 10" x 16" Horizontal Mitering Bandsaw 414475
  • Adjustable blade guide with six contact point system that utilizes cam follower bearings mounted on eccentric shafts on both sides of the blades
  • Adjustable Material Stop
  • Cast iron blade wheels
  • Downfeed system is controlled by a dual system of counterbalance springs working with a hydraulic cylinder
  • Heavy-duty transmission utilizes hardened and ground gears operating in an oil bath
MSRP: $13,649.45
$10,799
As low as $350.96/mo
View Details
Jet 10 x 18 Semi-Auto Variable Speed Dual Mitering Saw | EHB-1018VM 891070 at Elite Metal Tools
Jet 10 x 18 Semi-Auto Variable Speed Dual Mitering Saw | EHB-1018VM 891070
  • Adjustable Material Stop
  • Automatic blade shut off switch stops the sawing process
  • Built-in, self-propelled chip brush prevents chip build up in blade guides
  • Dual mitering allows for compound angle cutting of 60° right and 45° left
  • Heavy-duty construction reduces vibration and deflection
MSRP: $19,210.50
$15,136
As low as $299.54/mo
View Details
Jet JMD-18PFN Mill/Drill With ACU-RITE 203 DRO 350402 at Elite Metal Tools
Jet JMD-18PFN Mill/Drill With ACU-RITE 203 DRO 350402
  • 1/2” Drill chuck, chuck arbor
  • 360° head swivel
  • Adjustable carbide facemill
  • Base taper allows for easier clean up
  • Easy to read internal depth gauge
MSRP: $10,135.72
$8,075
As low as $262.43/mo
View Details

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.