GMC Machinery

  • Layout
GMC Machinery 14” x 40” Single Phase High Speed Precision Gap Bed Tool Room Engine Lathe GML-1440BGF-1 at Elite Metal Tools
GMC Machinery 14” x 40” Single Phase High Speed Precision Gap Bed Tool Room Engine Lathe GML-1440BGF-1
  • Heavy Duty main motor 3HP, 220V, 1 phase
  • Spindle bore 1 1/2”
  • 8 spindle speeds from 70-2,000 rpm
  • Heavy Duty guideway width 7 1/2”
$8,350.00
As low as $271/mo
View Details
GMC Machinery 16” x 60” Heavy Duty Precision Gap Bed Lathe GML-1660HD at Elite Metal Tools
GMC Machinery 16” x 60” Heavy Duty Precision Gap Bed Lathe GML-1660HD
  • Max. swing over bed: 16-1/16"
  • Max. length of workpiece: 60"
  • Max. swing over cross slide: 10 1/4"
  • Main motor: 6 HP, 220V, 3 Phase
$14,850.00
As low as $482/mo
View Details
GMC Machinery 15HP 32” x 80” Metal Gap Bed Lathe GML-3280 at Elite Metal Tools
GMC Machinery 15HP 32” x 80” Metal Gap Bed Lathe GML-3280
  • Max. swing over bed: 32”
  • Max. length of workpiece: 80”
  • Max. swing over cross slide: 22-7/16”
  • Max. Swing in gap: 40-1/2”
$37,850.00
As low as $749/mo
View Details
GMC Machinery 14” x 40” Heavy Duty Precision Gap Bed Lathe GML-1440HD at Elite Metal Tools
GMC Machinery 14” x 40” Heavy Duty Precision Gap Bed Lathe GML-1440HD
  • Max. swing over bed: 14 7/8"
  • Max. length of workpiece: 40"
  • Max. swing over cross slide: 10 1/16"
  • Main motor: 6 HP, 220V, 3 Phase
$13,650.00
As low as $443/mo
View Details
GMC Machinery 15HP 32” x 120” Metal Gap Bed Lathe GML-32120 at Elite Metal Tools
GMC Machinery 15HP 32” x 120” Metal Gap Bed Lathe GML-32120
  • Max. swing over bed: 32”
  • Max. length of workpiece: 120”
  • Max. swing over cross slide: 22-7/16”
  • Max. Swing in gap: 40-1/2”
$39,850.00
As low as $788/mo
View Details
GMC Machinery 16” x 40” Heavy Duty Precision Gap Bed Lathe GML-1640HD at Elite Metal Tools
GMC Machinery 16” x 40” Heavy Duty Precision Gap Bed Lathe GML-1640HD
  • Max. swing over bed: 16-1/16"
  • Max. length of workpiece: 40"
  • Max. swing over cross slide: 10 1/4"
  • Main motor: 6 HP, 220V, 3 Phase
$13,850.00
As low as $450/mo
View Details
GMC Machinery 14” x 40” Three Phase High Speed Precision Gap Bed Tool Room Engine Lathe GML-1440BGF-3 at Elite Metal Tools
GMC Machinery 14” x 40” Three Phase High Speed Precision Gap Bed Tool Room Engine Lathe GML-1440BGF-3
  • Heavy Duty main motor 3HP, 220V, 3 phase
  • Spindle bore 1 1/2”
  • 8 spindle speeds from 70-2,000 rpm
  • Heavy Duty guideway width 7 1/2”
$8,150.00
As low as $264/mo
View Details
GMC Machinery 20 GA to 26 GA Pittsburgh Type Locking Forming Machine PL-20E at Elite Metal Tools
GMC Machinery 20 GA to 26 GA Pittsburgh Type Locking Forming Machine PL-20E
  • Capacity: 20 Ga to 26 Ga
  • Depth of Pocket: 5/16”
  • Feeding Speed: 32 FPM
  • Main Motor: 1.5 HP, 110V
$4,150.00
As low as $134/mo
View Details
GMC Machinery 10HP 220V 20” x 80” Gap Bed Metal Lathe GML-2080 at Elite Metal Tools
GMC Machinery 10HP 220V 20” x 80” Gap Bed Metal Lathe GML-2080
  • Max. swing over bed: 20"
  • Max. length of workpiece: 80"
  • Max. swing over cross slide: 12-1/2"
  • Max. Swing in gap: 29-1/8”
$23,850.00
As low as $471/mo
View Details
GMC Machinery 2” Roller Shaft Power Ring & Angle Roll Bender PRB-55 at Elite Metal Tools
GMC Machinery 2” Roller Shaft Power Ring & Angle Roll Bender PRB-55
  • Dia. Of Roller: 7.5 Inch
  • Dia. Of Roller Shaft: 2 in
  • Roller Speed: 16 RPM
  • Motor: 3 HP 220v/440v 3-Phase
$6,850.00
As low as $222/mo
View Details
GMC Machinery 2” Roller Shaft Power Ring & Angle Roll Bender PRB-55-1PH at Elite Metal Tools
GMC Machinery 2” Roller Shaft Power Ring & Angle Roll Bender PRB-55-1PH
  • Dia. Of Roller: 7.5 Inch
  • Dia. Of Roller Shaft: 2 in
  • Roller Speed: 16 RPM
  • Motor: 4 HP 220V Single Phase
$7,850.00
As low as $255/mo
View Details
GMC Machinery 18 GA to 24 GA Pittsburgh Type Locking Forming Machine PL-18E at Elite Metal Tools
GMC Machinery 18 GA to 24 GA Pittsburgh Type Locking Forming Machine PL-18E
  • Capacity: 18 Ga to 24 Ga
  • Depth of Pocket: 1/2"
  • Feeding Speed: 23 FPM
  • Main Motor: 4HP, 220V, 3PH
$7,850.00
As low as $255/mo
View Details
GMC Machinery 10HP 220V 20” x 60” Gap Bed Metal High Speed Lathe GML-2060 at Elite Metal Tools
GMC Machinery 10HP 220V 20” x 60” Gap Bed Metal High Speed Lathe GML-2060
  • Max. swing over bed: 20"
  • Max. length of workpiece: 60"
  • Max. swing over cross slide: 12-1/2"
  • Max. Swing in gap: 29-1/8”
$21,850.00
As low as $432/mo
View Details
GMC Machinery 50” x 20 GA Diamond Forming Machine DFM-20 at Elite Metal Tools
GMC Machinery 50” x 20 GA Diamond Forming Machine DFM-20
  • Capacity 50″ x 20 Ga. Stainless steel
  • Main motor 2HP, 110V
  • Variable Speeds
  • Infeed Table W/Side gauge
$9,850.00
As low as $320/mo
View Details
GMC Machinery 2” Roller Shaft Power Ring & Angle Roll Bender with Hydraulic Top Roll PRB-55H at Elite Metal Tools
GMC Machinery 2” Roller Shaft Power Ring & Angle Roll Bender with Hydraulic Top Roll PRB-55H
  • Dia. Of Roller: 7.5 Inch
  • Dia. Of Roller Shaft: 2 in
  • Roller Speed: 16 RPM
  • Comes with Top Roller Hydraulic Positioning
$9,850.00
As low as $320/mo
View Details
GMC Machinery 2” Roller Shaft Power Ring & Angle Roll Bender with Hydraulic Top Roll PRB-55H-1PH at Elite Metal Tools
GMC Machinery 2” Roller Shaft Power Ring & Angle Roll Bender with Hydraulic Top Roll PRB-55H-1PH
  • Dia. Of Roller: 7.5 Inch
  • Dia. Of Roller Shaft: 2 in
  • Motor: 3 HP 220V Single Phase
  • Comes with Top Roller Hydraulic Positioning
$10,850.00
As low as $352/mo
View Details
GMC Machinery 4’ x 3/16" Powered Heavy-Duty Bending Roll PBR-04316E at Elite Metal Tools
GMC Machinery 4’ x 3/16" Powered Heavy-Duty Bending Roll PBR-04316E
  • Powered up/down with push button & display
  • Capacity Mild Steel: 4’ 3” x 3/16" 
  • Capacity Stainless Steel: 4' 3” x 10 Ga
  • Rolls Speed: 20 ft/min
$12,950.00
As low as $420/mo
View Details
GMC Machinery 12 Gauge Bead Roller Bending Machine BBM-12E at Elite Metal Tools
GMC Machinery 12 Gauge Bead Roller Bending Machine BBM-12E
  • Mild Steel Max Capacity: 12 Ga
  • Stainless Steel Max Capacity: 16 Ga
  • Throat Depth: 11"
  • Cylinder Length: 8"
$5,950.00
As low as $193/mo
View Details
GMC Machinery 15HP 220V 26” x 160” Precision Gap Bed Metal Lathe GML-26160 at Elite Metal Tools
GMC Machinery 15HP 220V 26” x 160” Precision Gap Bed Metal Lathe GML-26160
  • Max. swing over bed: 26"
  • Max. length of workpiece: 160"
  • Max. swing over cross slide: 17-1/4"
  • Max. Swing in gap: 35-3/8"
$45,850.00
As low as $907/mo
View Details
GMC Machinery 50” x 16 Gauge 220V 3-Phase Powered Slip Roll PSR-5016 at Elite Metal Tools
GMC Machinery 50” x 16 Gauge 220V 3-Phase Powered Slip Roll PSR-5016
  • Main Motor: 1 HP 220V 3-Phase
  • Capacity Mild Steel: 50” x 16 Ga
  • Capacity Stainless Steel: 50” x 22 Ga
  • Min Thickness Capacity: 50” x 22 Ga
$3,650.00
As low as $118/mo
View Details
GMC Machinery 26” x 80” 440V Heavy Duty Precision Gap Bed Lathe GML-2680 at Elite Metal Tools
GMC Machinery 26” x 80” 440V Heavy Duty Precision Gap Bed Lathe GML-2680
  • Max. swing over bed: 26"
  • Max. length of workpiece: 80"
  • Max. swing over cross slide: 17 1/4"
  • Main motor: 15 HP, 440V, 3 Phase
$31,850.00
As low as $630/mo
View Details
GMC Machinery 18 Gauge Bead Roller Bending Machine BBM-18E at Elite Metal Tools
GMC Machinery 18 Gauge Bead Roller Bending Machine BBM-18E
  • Mild Steel Max Capacity: 18 Ga
  • Stainless Steel Max Capacity: 22 Ga
  • Throat Depth: 8"
  • Cylinder Length: 5 1/2"
$3,750.00
As low as $121/mo
View Details
GMC Machinery 4’ x 1/4" Powered Heavy-Duty Bending Roll PBR-0425E at Elite Metal Tools
GMC Machinery 4’ x 1/4" Powered Heavy-Duty Bending Roll PBR-0425E
  • Powered up/down with push button & display
  • Capacity Mild Steel: 4’ 3” x 1/4"
  • Capacity Stainless Steel: 4' 3” x 3/16"
  • Rolls Speed: 20 ft/min
$15,950.00
As low as $315/mo
View Details
GMC Machinery 16 GA to 20 GA Pittsburgh Type Locking Forming Machine PL-16E at Elite Metal Tools
GMC Machinery 16 GA to 20 GA Pittsburgh Type Locking Forming Machine PL-16E
  • Capacity: 16 Ga to 20 Ga
  • Depth of Pocket: ½”
  • Feeding Speed: 23 FPM
  • Main Motor: 3 HP, 220V 3-PH
$8,850.00
As low as $287/mo
View Details

Founded in 1979 and since then has become an industry leader in metalworking equipment. GMC Machinery is located in Ontario, CA. They sell quality industrial products such as electric pallet trucks, forklifts, manual pallet trucks, order pickers, and stackers.

If you are interested in pallet trucks or anything else GMC Machinery has to offer, please contact us. Here at Elite Metal Tools we strive to provide the best customer service and low prices.