Edwards Manufacturing

  • Easily interchangeable attachment to maximize your Ironworker's capabilities
  • Fits Edwards 55 Ton Ironworkers
  • Integrated alignment slots on the safety guarding easily allow for 45° shearing on Angle Iron to speed up your fabrication process
  • Maximum Capacity: 2-1/2" x 4" x 5/16"
  • Versatile Attachment that removes anything from a small nibble to a large notch out of Flat Bar or Angle Iron
MSRP: $2,581.25
$2,085
As low as $67.76/mo
  • Fits Edwards 50, 55, and 60 Ton Ironworkers (2013 and prior)
  • Replaces Standard Punch Assembly or can be used as a secondary Punch Workstation
  • Requires Oversize Punch & Die sets (contact Edwards for pricing and availability)
  • The Oversize Punch Assembly accommodates punch & die sets in various shapes and sizes from 1" up to 1-9/16"
MSRP: $1,243.32
$1,060
As low as $34.45/mo
  • 20' quick-connect hoses for simple "plug & play" operation
  • Bend a wide variety of round or square tube and pipe up to 180°s
  • Built-in storage on the frame keeps your Bender Dies conveniently close
  • Easy-to-use hand/jog controls with integrated E-Stop
  • Heavy-duty rolling stand allows you to move the Radius Roller around as needed
MSRP: $12,247.63
$9,969
As low as $323.99/mo
  • Punch large holes and slots in anything from heavy sheet metal to steel beams
  • Replaces the installed Punch Assembly on the 65 Ton Ironworkers (2013 & Prior)
  • Requires 241 Punch & Die sets (contact Edwards for pricing and availability)
  • 241 punch assembly accommodates punch and die sets in various shapes and sizes from 1" up to 4"
MSRP: $2,756.92
$2,243
As low as $72.89/mo
  • Cannot run without Ironworker or Portable Power Unit
MSRP: $6,878.77
$5,599
As low as $181.96/mo
  • Compatible with Edwards 60 and 110 Ton Shop Presses
  • Easy to install on the Edwards 60 and 110 Ton Shop Presses, this versatile set has a piece of tooling to fit all your needs
  • The Six Piece Press Tooling Set includes both tapered, cutaway, and various diameter push blocks to allow users to press bearings, bend metal or straighten part
MSRP: $1,067.65
$936
As low as $30.42/mo
  • Punch large holes and slots in anything from heavy sheet metal to steel beams
  • Replaces the installed Punch Assembly on the 50, 55, & 60 Ton Ironworkers (2013 & Prior)
  • Requires 241 Punch & Die sets (contact Edwards for pricing and availability)
  • 241 punch assembly accommodates punch and die sets in various shapes and sizes from 1" up to 4"
MSRP: $2,756.92
$2,243
As low as $72.89/mo
  • Allows for an easy 90° to create a steel frame
  • Easily interchangeable attachment to maximize your Ironworker's capabilities
  • Take precise 92° notch out of mild steel up to 3" x 3" x 1/4"
MSRP: $2,364.99
$1,924
As low as $62.53/mo
  • Positive stop attachment fitted to the back of the Ironworker ensures accurate bending
  • Fits all Edwards Ironworkers
  • Fits all Edwards Ironworkers and Shop Presses
  • Speed up production on repeatable bends by providing an adjustable stop for the various size Brake Attachments
MSRP: $1,135.19
$955
As low as $31.03/mo
  • 20' quick-connect hoses for simple "plug & play" operation
  • Bend a wide variety of round or square tube and pipe up to 180°s
  • Built-in storage on the frame keeps your Bender Dies conveniently close
  • Easy-to-use hand/jog controls with integrated E-Stop
  • Heavy-duty rolling stand allows you to move the Radius Roller around as needed
MSRP: $11,461.34
$9,329
As low as $303.19/mo
  • Easily create repeatable bends when paired with the Press Brake Back Gauge
  • Fabricate brackets, frames, pans, and tanks with this Brake with 4-Way Die
  • Includes a standard punch that allows 1/16", 1/8", 3/16" and 1/4" material to be formed to a 90° angle
MSRP: $2,432.53
$1,979
As low as $64.31/mo
  • Allows for an easy 90° to create a steel frame
  • Easily interchangeable attachment to maximize your Ironworker's capabilities
  • Take precise 92° notch out of mild steel up to 3" x 3" x 1/4"
MSRP: $2,297.45
$1,869
As low as $60.74/mo
  • Allows for an easy 90° to create a steel frame
  • Easily interchangeable attachment to maximize your Ironworker's capabilities
  • Take precise 92° notch out of mild steel up to 3" x 3" x 1/4"
MSRP: $2,297.45
$1,869
As low as $60.74/mo
  • 20' quick-connect hoses for simple "plug & play" operation
  • Accepts a variety of standard and custom tooling
  • Easy-to-use hand/jog controls with integrated E-Stop
  • Hydraulic-assist adjustable work table heights to maximize operator safety includes lift chains and bracket
  • Open-sided design allows longer material to pass through the frame
MSRP: $11,055.91
$8,999
As low as $292.46/mo
  • Compatible with the 65, 120, and 110/65 Ton Elite Ironworkers
  • Contact Edwards for custom dies to match your project
  • Make clean 90° saddle joint connections quickly and easily
MSRP: $1,135.19
$955
As low as $31.03/mo
  • Custom Dies for Schedule 80 and Tube are also available
  • Designed for use with the Edwards Pipe Notcher Attachments, the Pipe Notcher Dies shear a perfect saddle cut in 1-1/2" Schedule 40 pipe
  • Integrated alignment ensures your notches line up exactly, with a smooth precise shear every time
  • Requires an Edwards Pipe Notcher Attachment
MSRP: $1,418.99
$1,185
As low as $38.51/mo
  • 20' quick-connect hoses for simple "plug & play" operation
  • Accepts a variety of standard and custom tooling
  • Easy-to-use hand/jog controls with integrated E-Stop
  • Hydraulic-assist adjustable work table heights to maximize operator safety includes lift chains and bracket
  • Open-sided design allows longer material to pass through the frame
MSRP: $11,547.34
$9,399
As low as $305.46/mo
  • Allows for an easy 90° to create a steel frame
  • Easily interchangeable attachment to maximize your Ironworker's capabilities
  • Take precise 92° notch out of mild steel up to 3" x 3" x 1/4"
MSRP: $2,297.45
$1,869
As low as $60.74/mo
  • Easily create repeatable bends when paired with the Press Brake Back Gauge
  • Fabricate brackets, frames, pans, and tanks with this Brake with 4-Way Die
  • Includes a standard punch that allows 1/16", 1/8", 3/16" and 1/4" material to be formed to a 90° angle
MSRP: $1,824.45
$1,495
As low as $48.58/mo
  • 20' quick-connect hoses for simple "plug & play" operation
  • Designed for maximum flexibility with 4 pin locations to accept wide variety of custom tooling
  • Digital encoder provides enhanced accuracy for precise repeatability
  • Easy-to-use hand/jog controls with integrated E-Stop
  • Requires an Edwards Ironworker with PowerLink System or a Portable Power Unit to operate (included)
MSRP: $21,990.20
$17,899
As low as $354.22/mo
  • Made of durable tool steel for long life
  • Note: Punch diameter must meet or exceed the thickness of your material
  • Produces round holes
  • Requires Oversized Punch Assembly
  • 20' quick-connect hoses for simple "plug & play" operation
  • Bend a wide variety of round or square tube and pipe up to 180°s
  • Built-in storage on the frame keeps your Bender Dies conveniently close
  • Easy-to-use hand/jog controls with integrated E-Stop
  • Heavy-duty rolling stand allows you to move the Radius Roller around as needed
MSRP: $11,780.77
$9,589
As low as $311.64/mo
  • 20' quick-connect hose for simple "plug & play" operation
  • ANSI B11.5-1988(02) Compliant Guarding
  • Electric foot pedal with integrate jog control
  • Interchangeable Attachments available to tailor the Ironworker to your needs
  • Optimized workstation heights for improved efficiency
MSRP: $15,724.49
$12,799
As low as $415.96/mo
  • Heavy-duty castors provide easy portability to move around your shop
  • Integrated Lock-out/Tag-out system with E-Stop for added safety
  • Mobile PowerLink™ System is a power source to operate all EDWARDS Hydraulic Tools
  • Quick connect couplings are easy to use allowing rapid transitions between Edwards Hydraulic Tools
MSRP: $7,063.06
$5,749
As low as $186.84/mo

Founded in 1875 and located in Albert Lea, MN. This company leads the industry with a full line of high quality iron workers. Some of their products include powerlink hydraulic tools, hydraulic accessories, and iron workers. 

If you are interested in any hydraulic tools or anything else Edwards Manufacturing has to offer, please contact us. Here at Elite Metal Tools we strive to give our customers the best service and offer low prices.