Clausing / Kalamazoo

  • Equipped with hydraulic separate clamping unit. Vertical movement of arm is coordinated by an IC timer. With a single touch on push button switch, you can have the arm unclamped then move vertically, or stop then clamp automatically. Very easy to operate, and tools will always stay at the same point after tool shifting
  • Powerful 5 Hp, 2-speed, heavy-duty spindle drive motor
  • Special automatic tool eject device is supplied to allow you to change tools quickly. (No drifter is required) Special arm elevating device is provided to prevent arm from falling down abruptly after years of usage
    Coolant system
  • CSA Electrics Standard
  • Drilling capacity in steel: up to 1.26" (32mm) maximum
  • Drilling capacity in cast iron: up to 1.38" (35mm) maximum
  • Built-in low voltage electrical equipment in machine head
  • Drill guard with microswitch
  • 8" Round Capacity Wet Cutting Horizontal Bandsaw at 90º
  • 7" Square Capacity Wet Cutting Horizontal Bandsaw at 90º
  • 7" x 14" Rectangle (H x W) Wet Cutting Horizontal Bandsaw at 90º
  • 1" Bimetal Bandsaw Blade
  • Specify 3-Phase or 1-Phase 
  • Heavy-duty precision head... all bearing surfaces are precision bored simultaneously for exact alignment. Eight ball bearings support the drive and spindle, lower spindle bearing has a double row to absorb both radial and thrust loads.
  • 3 MT spindle... with 6-1/2" travel, 2-1/2" diameter quill and micrometer depth stop
  • Capacity, hand feed 1.25" (31.75mm) dia
  • Drilling capacity in steel: up to 1.57" (40mm) maximum
  • Drilling capacity in cast iron: up to 1.77" (45mm) maximum
  • Depth scale and adjustable depth stop
  • Built-in low voltage electrical equipment in machine head
$14,220.00
$13,599.00
  • 4 speed step pulley with worm gear speed reducer, worm shaft is hardened and ground
  • Heavy-duty hydraulic cylinder with precision ground hinge support
  • 1" wide bi-metal saw blade
  • 2 year manufactures limited warranty (Contact us for details)
  • Specify 230 Volt or 460 Volt
  • Drill to center of circle 20"  dia.
  • Spindle travel 6.5"
  • Variable and spindle pulleys are cast iron, fully machined and balanced
  • Full or Semi-Automatic Operation
  • Automatic Height setting feature
  • Front mounted digital length gauge
  • 2 year limited manufactures warranty (Contact us for details)
$23,950.00
$23,150.00
  • Twin column design insures rigid support during cutting cycle by keeping the blade parallel and square to the work piece
  • Automatic hydraulic blade tensioning
  • Integral coolant system
  • Two (2) year limited warranty
$30,820.00
$30,099.00
  • Tapping capacity in steel: .71" (18mm) maximum
  • Tapping capacity in cast iron: .87" (22mm) maximum
  • “RS" models are equipped with automatic feed reversing TL25 system for tapping
  • Drill guard with microswitch
$7,860.00
$7,699.00
  • Infinity Variable Speed drive
  • Heavy-duty hydraulic cylinder with precision ground hinge support
  • 1" wide bi-metal saw blade
  • 2 year manufactures limited warranty (Contact us for Details)
  • Mounted to a fixed or oversized table offer greater ease in positioning the workpiece and the flexibility to handle bulky or heavy workpieces.
  • Each drill head on a multiple head drill can be equipped differently to perform the operation required by that head such as... automatic drilling cycle, automatic tapping or any of the equipment offered.
  • Drilling machines can be set-up with rotating heads adding flexibility
  • 3 head drill press
$48,775.00
$46,499.00
  • Adjustable work stop
  • Integrated coolant system
  • Variable blade speed
  • Power chip brush
  • 5 head drill press
  • Mounted to a fixed or oversized table offer greater ease in positioning the workpiece and the flexibility to handle bulky or heavy workpieces.
  • Each drill head on a multiple head drill can be equipped differently to perform the operation required by that head such as... automatic drilling cycle, automatic tapping or any of the equipment offered.
  • Drilling machines can be set-up with rotating heads adding flexibility
$45,085.00
$41,599.00
  • Drilling capacity in steel: 1" (25mm) maximum
  • Drilling capacity in cast iron: 1.18" (30mm) maximum
  • Depth scale and adjustable depth stop
  • Drill guard with microswitch
  • Mounted to a fixed or oversized table offer greater ease in positioning the workpiece and the flexibility to handle bulky or heavy workpieces.
  • Each drill head on a multiple head drill can be equipped differently to perform the operation required by that head such as... automatic drilling cycle, automatic tapping or any of the equipment offered.
  • Drilling machines can be set-up with rotating heads adding flexibility
  • Single head drill press
$19,480.00
$18,499.00
  • Magnetic Starter with 110v Control Circuit and Overload Protection
  • Hydraulic Table Models 26-3/4" (680mm) x 29" (736mm) Heavy-duty Cast Iron Table with two-way tilt (15°L & 45°R) Four (4) T-Slots on Top Table Travel 13"
  • Blade Tension Indicator
  • Two (2) year limited warranty
$13,095.00
$12,499.00
  • Cross link connecting two columns for enhanced structural strength
  • Automatic hydraulic blade tensioning device
  • Hydraulically powered in-feed lift roller for forward and backward feeding
  • Two (2) year limited warranty
  • Drilling capacity in steel: up to 1.26" (32mm) maximum
  • Drilling capacity in cast iron: up to 1.38" (35mm) maximum
  • Feed crank wheel for manual feed
  • Depth scale and adjustable depth stop
$9,650.00
$9,199.00
  • Gears in gear box are cooled by oil cycled by an oil pump to minimize gear wear
  • Friction type disc clutch absorbs impact force caused by vertical movement of spindle, and protects all transmission units inside gear box. With quick spindle return, the clutch will help speed-up the tapping operation
  • Special automatic tool eject device is supplied to allow you to change tools quickly. (No drifter is required) Special arm elevating device is provided to prevent arm from falling down abruptly after years of usage
  • CSA Electrics Standard
  • 2 head drill press
  • Mounted to a fixed or oversized table offer greater ease in positioning the workpiece and the flexibility to handle bulky or heavy workpieces.
  • Each drill head on a multiple head drill can be equipped differently to perform the operation required by that head such as... automatic drilling cycle, automatic tapping or any of the equipment offered.
  • Drilling machines can be set-up with rotating heads adding flexibility
$20,655.00
$19,299.00
  • Drilling capacity in steel: up to 1.57" (40mm) maximum
  • Drilling capacity in cast iron: up to 1.77" (45mm) maximum
  • Machine base with 2 T-slots, coolant tank and pump
  • Drill guard with microswitch
$12,485.00
$11,949.00
  • Mounted to a fixed or oversized table offer greater ease in positioning the workpiece and the flexibility to handle bulky or heavy workpieces.
  • Each drill head on a multiple head drill can be equipped differently to perform the operation required by that head such as... automatic drilling cycle, automatic tapping or any of the equipment offered.
  • Drilling machines can be set-up with rotating heads adding flexibility
  • 5 head drill press
$79,780.00
$75,999.00
  • Tapping capacity in steel: .71" (18mm) maximum
  • Tapping capacity in cast iron: .87" (22mm) maximum
  • “EVRS" models are equipped with electronic variable speed and automatic feed reversing system for tapping
  • Automatic tool ejector
$8,620.00
$8,249.00