Clausing / Kalamazoo

  • Adjustable work stop
  • Integrated coolant system
  • Variable blade speed
  • Power chip brush
  • Enclosed Worm Gear Drive for Trouble-free Operation
  • Head Rotates 45 Degrees Left and Right of Center
  • Flood Coolant System
  • Two (2) Year Limited Warranty
  • Specify 230 Volt or 460 Volt
  • Drill to center of circle 20"  dia.
  • Spindle travel 6.5"
  • Variable and spindle pulleys are cast iron, fully machined and balanced
  • Drilling capacity in steel: up to 1.26" (32mm) maximum
  • Drilling capacity in cast iron: up to 1.38" (35mm) maximum
  • Feed crank wheel for manual feed
  • Depth scale and adjustable depth stop
$9,650
$9,199
Save $451!
  • High Column 
  • Gears in gear box are cooled by oil cycled by an oil pump to minimize gear wear
  • Friction type disc clutch absorbs impact force caused by vertical movement of spindle, and protects all transmission units inside gear box. With quick spindle return, the clutch will help speed-up the tapping operation
  • Special automatic tool eject device is supplied to allow you to change tools quickly. (No drifter is required) Special arm elevating device is provided to prevent arm from falling down abruptly after years of usage
  • Magnetic Starter with 110v Control Circuit and Overload Protection
  • Fixed Table Models 26-3/4" (680mm) x 29" (736mm) Heavy-duty Cast Iron Table with two-way tilt (15°L & 45°R)
  • Blade Speed Indicator
  • Two (2) year limited warranty
  • Tapping capacity in steel: .71" (18mm) maximum
  • Tapping capacity in cast iron: .87" (22mm) maximum
  • “RS" models are equipped with automatic feed reversing TL25 system for tapping
  • Drill guard with microswitch
  • 4 speed step pulley with worm gear speed reducer, worm shaft is hardened and ground
  • Heavy-duty hydraulic cylinder with precision ground hinge support
  • 1" wide bi-metal saw blade
  • 2 year manufactures limited warranty (Contact us for details)
  • Friction type disc clutch absorbs impact force caused by vertical movement of spindle, and protects all transmission units inside gear box. With quick spindle return, the clutch will help speed-up the tapping operation
  • Special automatic tool eject device is supplied to allow you to change tools quickly. (No drifter is required) Special arm elevating device is provided to prevent arm from falling down abruptly after years of usage
    Coolant system
  • Equipped with hydraulic separate clamping unit. Vertical movement of arm is coordinated by an IC timer. With a single touch on push button switch, you can have the arm unclamped then move vertically, or stop then clamp automatically. Very easy to operate, and tools will always stay at the same point after tool shifting
  • CSA Electrics Standard
  • Tapping capacity in steel: .71" (18mm) maximum
  • Tapping capacity in cast iron: .87" (22mm) maximum
  • “EVRS" models are equipped with electronic variable speed and automatic feed reversing system for tapping
  • Spindle reversing switch
$9,270
$8,849
Save $421!
  • High-quality cast-iron arm with heat-treated and ground slides for smooth and accurate head positioning
  • The bearing bracket for gear-box is fitted with standard bearings to fit arm slide for smooth gear-box operation
  • Equipped withhydraulic clamping. With a push of a button you can have arm unclamped then move vertically, or stop then clamp automatically
  • CSA Electrics Standard
  • 230v/460v/60/3 Electricals
  • Self-Centering Vise with Angle Scale
  • Flood Coolant System
  • Two (2) Year Limited Warranty
  • 5 head drill press
  • Mounted to a fixed or oversized table offer greater ease in positioning the workpiece and the flexibility to handle bulky or heavy workpieces.
  • Each drill head on a multiple head drill can be equipped differently to perform the operation required by that head such as... automatic drilling cycle, automatic tapping or any of the equipment offered.
  • Drilling machines can be set-up with rotating heads adding flexibility
$45,085
$41,599
Save $3,486!
  • Magnetic Starter with 110v Control Circuit and Overload Protection
  • Fixed Table Models 26-3/4" (680mm) x 29" (736mm) Heavy-duty Cast Iron Table with two-way tilt (15°L & 45°R)
  • 3/4" (19mm) Carbon Hardback Blade
  • Two (2) year limited warranty
  • Full or Semi-Automatic Operation
  • Automatic Height setting feature
  • Front mounted digital length gauge
  • 2 year limited manufactures warranty (Contact us for details)
  • Magnetic Starter with 110v Control Circuit and Overload Protection
  • Hydraulic Table Models 26-3/4" (680mm) x 29" (736mm) Heavy-duty Cast Iron Table with two-way tilt (15°L & 45°R) Four (4) T-Slots on Top Table Travel 13"
  • Blade Tension Indicator
  • Two (2) year limited warranty
$13,095
$12,499
Save $596!
  • 8" Round Capacity Wet Cutting Horizontal Bandsaw at 90º
  • 7" Square Capacity Wet Cutting Horizontal Bandsaw at 90º
  • 7" x 14" Rectangle (H x W) Wet Cutting Horizontal Bandsaw at 90º
  • 1" Bimetal Bandsaw Blade
  • Smart NC-100 technology programmable up to 100 different jobs
  • Precision feed pressure & feed rate
  • Cast iron vises with replaceable hardened wear plates
  • Two (2) year limited warranty
  • Gears in gear box are cooled by oil cycled by an oil pump to minimize gear wear
  • Friction type disc clutch absorbs impact force caused by vertical movement of spindle, and protects all transmission units inside gear box. With quick spindle return, the clutch will help speed-up the tapping operation
  • Special automatic tool eject device is supplied to allow you to change tools quickly. (No drifter is required) Special arm elevating device is provided to prevent arm from falling down abruptly after years of usage
  • CSA Electrics Standard
  • “RS" models are equipped with automatic feed reversing TL25 system for tapping
  • Spindle reversing switch
  • High/low speed range selector
  • Drill guard with microswitch
$8,865
$8,399
Save $466!
  • Drilling capacity in steel: 1" (25mm) maximum
  • Drilling capacity in cast iron: 1.18" (30mm) maximum
  • “EV" models are equipped with electronic variable speed
  • Automatic tool ejector
$8,400
$8,049
Save $351!
  • 4 head drill press
  • Mounted to a fixed or oversized table offer greater ease in positioning the workpiece and the flexibility to handle bulky or heavy workpieces.
  • Each drill head on a multiple head drill can be equipped differently to perform the operation required by that head such as... automatic drilling cycle, automatic tapping or any of the equipment offered.
  • Drilling machines can be set-up with rotating heads adding flexibility
$36,400
$34,399
Save $2,001!
  • 200-1300 RPM 
  • Greater capacity, too, with Clausing LOW/HIGH, production rated 1-1/8" in cast iron, 7/8" in steel with optional power feed
  • Precision ground 22" x 19" oil trough table, handles large parts and fixtures.
  • Three V-belts and a cog belt transmit positive power to the spindle
  • Enclosed Worm Gear Drive for Trouble-free Operation
  • Self-Centering Vise with Angle Scale
  • Heavy Duty Sheet Metal Base
  • Two (2) Year Limited Warranty