Clausing Industrial

  • Gears in gear box are cooled by oil cycled by an oil pump to minimize gear wear
  • Friction type disc clutch absorbs impact force caused by vertical movement of spindle, and protects all transmission units inside gear box. With quick spindle return, the clutch will help speed-up the tapping operation
  • Special automatic tool eject device is supplied to allow you to change tools quickly. (No drifter is required) Special arm elevating device is provided to prevent arm from falling down abruptly after years of usage
  • CSA Electrics Standard
$80,650
As low as $1,596.06/mo
  • Hydraulic Pump Motor: 2 Hp
  • Hydraulic Oil Capacity: 10.6 gallons
  • Blade Speeds (Variable Speed): 66-328 fpm
  • Blade Size (W x T x L): 1.5” x 0.050” x 184”
$47,765
As low as $945.26/mo
  • Magnetic Starter with 110v Control Circuit and Overload Protection
  • Hydraulic Table Models 26-3/4" (680mm) x 29" (736mm) Heavy-duty Cast Iron Table with two-way tilt (15°L & 45°R) Four (4) T-Slots on Top Table Travel 13"
  • Blade Tension Indicator
  • Two (2) year limited warranty
$15,425
As low as $305.26/mo
  • Blade Size: 1.25” x 0.042” x 161”
  • Blade Speeds (variable): 49-262 FPM
  • Bed Height: 31.1”
  • Coolant Capacity: 10.57 gallons 
$23,245
As low as $460.01/mo
  • Step Speed Drive: 2
  • Blade Size: 1” x 0.035” x 96.5”
  • Blade Speeds: 132 and 264 FPM
  • Bed Height from Floor: 39.5”
$9,875
As low as $320.93/mo
  • Band Wheel Diameter: 15” Flanged, Cast Iron
  • Blade Size: 1” x .035” x 11’
  • Bed Height: 25”
  • Blade Speeds Step: (4) 75, 121, 190, 305 fpm
$6,625
As low as $215.31/mo
  • Band Wheel Diameter: 15” Flanged, Cast Iron
  • Blade Size: 1” x .035” x 11’
  • Bed Height: 25”
  • Blade Speeds Step: (4) 75, 121, 190, 305 fpm
$6,625
As low as $215.31/mo
  • High-quality cast-iron arm with heat-treated and ground slides for smooth and accurate head positioning
  • The bearing bracket for gear-box is fitted with standard bearings to fit arm slide for smooth gear-box operation
  • Equipped withhydraulic clamping. With a push of a button you can have arm unclamped then move vertically, or stop then clamp automatically
  • CSA Electrics Standard
$31,095
As low as $615.37/mo
  • Band Wheel Diameter: 15” Flanged, Cast Iron
  • Blade Size: 1” x .035” x 11’
  • Bed Height: 25”
  • Blade Speeds VS: 50-295 fpm
$7,495
As low as $243.58/mo
  • Magnetic Starter with 110v Control Circuit and Overload Protection
  • 1/2" (13mm) and 3/4" (19mm) Chevron type Blade Guides with Back-Up Roller
  • Hydraulic Table Models 26-3/4" (680mm) x 29" (736mm) Heavy-duty Cast Iron Table with two-way tilt (15°L & 45°R) Four (4) T-Slots on Top Table Travel 13"
  • Two (2) year limited warranty
$17,195
As low as $340.28/mo
  • Band Wheel Diameter: 15” Flanged, Cast Iron
  • Blade Size: 1” x .035” x 11’
  • Bed Height: 25”
  • Blade Speeds VS: 50-295 fpm
$7,495
As low as $243.58/mo
  • Band Wheel Diameter: 15.4” Flanged, Cast Iron
  • Blade Size: 1” x 0.035” x 11’-4.5”
  • Bed Height: 21.8”
  • Blade Speeds: 69–321 fpm
$7,495
As low as $243.58/mo
  • Magnetic Starter with 110v Control Circuit and Overload Protection
  • Fixed Table Models 26-3/4" (680mm) x 29" (736mm) Heavy-duty Cast Iron Table with two-way tilt (15°L & 45°R)
  • 3/4" (19mm) Carbon Hardback Blade
  • Two (2) year limited warranty
$14,825
As low as $481.81/mo
  • High Column 
  • Gears in gear box are cooled by oil cycled by an oil pump to minimize gear wear
  • Friction type disc clutch absorbs impact force caused by vertical movement of spindle, and protects all transmission units inside gear box. With quick spindle return, the clutch will help speed-up the tapping operation
  • Special automatic tool eject device is supplied to allow you to change tools quickly. (No drifter is required) Special arm elevating device is provided to prevent arm from falling down abruptly after years of usage
$86,095
As low as $1,703.82/mo
  • Blade Speeds (variable): 66 - 328 fpm
  • Blade Size: 2” x 0.06” x 283”
  • Feed Length/Index: 19.7”
  • Bed Height: 23.6”
$81,135
As low as $1,605.66/mo
  • Blade Speeds (Variable Speed): 66–330 fpm
  • Blade Size: 1.25” x 0.042” x 193”
  • Minimum Cut Thickness: 0.126”
  • Max. Feed: 255.9”
$41,155
As low as $814.45/mo
  • Friction type disc clutch absorbs impact force caused by vertical movement of spindle, and protects all transmission units inside gear box. With quick spindle return, the clutch will help speed-up the tapping operation
  • Special automatic tool eject device is supplied to allow you to change tools quickly. (No drifter is required) Special arm elevating device is provided to prevent arm from falling down abruptly after years of usage
    Coolant system
  • Equipped with hydraulic separate clamping unit. Vertical movement of arm is coordinated by an IC timer. With a single touch on push button switch, you can have the arm unclamped then move vertically, or stop then clamp automatically. Very easy to operate, and tools will always stay at the same point after tool shifting
  • CSA Electrics Standard
$158,645
As low as $3,139.58/mo
  • Gears in gear box are cooled by oil cycled by an oil pump to minimize gear wear
  • Friction type disc clutch absorbs impact force caused by vertical movement of spindle, and protects all transmission units inside gear box. With quick spindle return, the clutch will help speed-up the tapping operation
  • Coolant system
  • CSA Electrics Standard
$103,745
As low as $2,053.11/mo
  • Blade Speeds (Variable Speed): 49-295 fpm
  • Blade Size (W x T x L): 2” x 0.063” x 326.8”
  • Blade Tension: Hydraulic
  • Coolant: Recirculating
$106,549
As low as $2,108.60/mo
  • 5 Hp TEFC Motor, with Brake (full stop from max. speed within 10 seconds)
  • 1" (25.4mm) Chevron type Blade Guides with Back-Up Roller
  • Blade Speed Indicator
  • Two (2) Year Limited Warranty
$29,425
As low as $582.32/mo
  • Blade Speeds (variable): 66 - 328 fpm
  • Blade Size: 2” x 0.063” x 238”
  • Coolant Capacity: 21.5 gallons
  • Bed Height: 27.5”
$46,945
As low as $929.04/mo
  • Blade Speeds (Variable Speed): 83–330 fpm
  • Blade Size: 1.5” x 0.050” x 257.5”
  • Blade Tension: Hydraulic
  • Coolant: Recirculating
$63,055
As low as $1,247.85/mo
  • 5 Hp TEFC Motor, with Brake (full stop from max. speed within 10 seconds)
  • Auxiliary Table 19" (483mm)W x 26-3/4" (679mm)L
  • Blade Tension Indicator
  • Two (2) Year Limited Warranty
$32,425
As low as $641.69/mo
  • Blade Speeds (variable): 66 - 328 fpm
  • Blade Size: 2” x 0.06” x 283”
  • Coolant Capacity: 25 gallons
  • Bed Height: 23.6”
$62,595
As low as $1,238.75/mo

First founded in 1911 this industrial company has become an industry leader in the metalworking machine field. They are located in Kalamazoo, Mi. They sell products such as lathes, drill press, metal cutting band saws, and  mills. Clausing Industrial makes high quality and efficient machinery.

If you are interested in metalworking machinery or anything else Clausing Industrial has to offer, please contact us. Here at Elite Metal Tools we offer high quality customer service and low prices.