Clausing Industrial

  • 2 head drill press
  • Mounted to a fixed or oversized table offer greater ease in positioning the workpiece and the flexibility to handle bulky or heavy workpieces.
  • Each drill head on a multiple head drill can be equipped differently to perform the operation required by that head such as... automatic drilling cycle, automatic tapping or any of the equipment offered.
  • Drilling machines can be set-up with rotating heads adding flexibility
  • Equipped with hydraulic separate clamping unit. Vertical movement of arm is coordinated by an IC timer. With a single touch on push button switch, you can have the arm unclamped then move vertically, or stop then clamp automatically. Very easy to operate, and tools will always stay at the same point after tool shifting
  • Powerful 5 Hp, 2-speed, heavy-duty spindle drive motor
  • Special automatic tool eject device is supplied to allow you to change tools quickly. (No drifter is required) Special arm elevating device is provided to prevent arm from falling down abruptly after years of usage
  • CSA Electrics Standard
  • Mounted to a fixed or oversized table offer greater ease in positioning the workpiece and the flexibility to handle bulky or heavy workpieces.
  • Each drill head on a multiple head drill can be equipped differently to perform the operation required by that head such as... automatic drilling cycle, automatic tapping or any of the equipment offered.
  • Drilling machines can be set-up with rotating heads adding flexibility
  • 3 head drill press
  • Magnetic Starter with 110v Control Circuit and Overload Protection
  • Fixed Table Models 26-3/4" (680mm) x 29" (736mm) Heavy-duty Cast Iron Table with two-way tilt (15°L & 45°R)
  • Blade Speed Indicator
  • Two (2) year limited warranty
  • Drilling capacity in steel: 1" (25mm) maximum
  • Drilling capacity in cast iron: 1.18" (30mm) maximum
  • “EV" models are equipped with electronic variable speed
  • Automatic tool ejector
  • 2HP spindle drive motor for heavy duty cutting
  • High speed gears are made of nickel-chrome steel and are heat treated and ground for durability
  • Coolant system
  • Low volt & overload protection
  • Drilling capacity in steel: 1" (25mm) maximum
  • Drilling capacity in cast iron: 1.18" (30mm) maximum
  • Depth scale and adjustable depth stop
  • High/low speed range selector
  • Specify 230 Volt or 460 Volt
  • Drill to center of circle 20"  dia.
  • Spindle travel 6.5"
  • Variable and spindle pulleys are cast iron, fully machined and balanced
  • Drilling capacity in steel: up to 1.57" (40mm) maximum
  • Drilling capacity in cast iron: up to 1.77" (45mm) maximum
  • Depth scale and adjustable depth stop
  • Built-in low voltage electrical equipment in machine head
  • Drilling capacity in steel: 1" (25mm) maximum
  • Drilling capacity in cast iron: 1.18" (30mm) maximum
  • Depth scale and adjustable depth stop
  • High/low speed range selector
  • Tapping capacity in steel: .71" (18mm) maximum
  • Tapping capacity in cast iron: .87" (22mm) maximum
  • “EVRS" models are equipped with electronic variable speed and automatic feed reversing system for tapping
  • Automatic tool ejector
  • Mounted to a fixed or oversized table offer greater ease in positioning the workpiece and the flexibility to handle bulky or heavy workpieces.
  • Each drill head on a multiple head drill can be equipped differently to perform the operation required by that head such as... automatic drilling cycle, automatic tapping or any of the equipment offered.
  • Drilling machines can be set-up with rotating heads adding flexibility
  • 2 head drill press
  • Mounted to a fixed or oversized table offer greater ease in positioning the workpiece and the flexibility to handle bulky or heavy workpieces.
  • Each drill head on a multiple head drill can be equipped differently to perform the operation required by that head such as... automatic drilling cycle, automatic tapping or any of the equipment offered.
  • Drilling machines can be set-up with rotating heads adding flexibility
  • 2 head drill press
  • 3 head drill press
  • Mounted to a fixed or oversized table offer greater ease in positioning the workpiece and the flexibility to handle bulky or heavy workpieces.
  • Each drill head on a multiple head drill can be equipped differently to perform the operation required by that head such as... automatic drilling cycle, automatic tapping or any of the equipment offered.
  • Drilling machines can be set-up with rotating heads adding flexibility
  • Magnetic Starter with 110v Control Circuit and Overload Protection
  • Hydraulic Table Models 26-3/4" (680mm) x 29" (736mm) Heavy-duty Cast Iron Table with two-way tilt (15°L & 45°R) Four (4) T-Slots on Top Table Travel 13"
  • Blade Tension Indicator
  • Two (2) year limited warranty
  • Powerful 3 HP spindle drive motor for heavy duty cutting
  • High speed gears
  • Low volt and overload protection
  • Tool kit & manuals
  • Specify 3-Phase or 1-Phase 
  • Heavy-duty precision head... all bearing surfaces are precision bored simultaneously for exact alignment. Eight ball bearings support the drive and spindle, lower spindle bearing has a double row to absorb both radial and thrust loads.
  • 3 MT spindle... with 6-1/2" travel, 2-1/2" diameter quill and micrometer depth stop
  • Capacity, hand feed 1.25" (31.75mm) dia
  • Automatic kerf loss compensation & computer controlled multiple indexing
  • Smart NC-100 technology programmable up to 100 different jobs
  • Automatic height setting feature
  • Two (2) year limited warranty
  • Drilling capacity in steel: 1" (25mm) maximum
  • Drilling capacity in cast iron: 1.18" (30mm) maximum
  • Depth scale and adjustable depth stop
  • Drill guard with microswitch
  • 5 head drill press
  • Mounted to a fixed or oversized table offer greater ease in positioning the workpiece and the flexibility to handle bulky or heavy workpieces.
  • Each drill head on a multiple head drill can be equipped differently to perform the operation required by that head such as... automatic drilling cycle, automatic tapping or any of the equipment offered.
  • Drilling machines can be set-up with rotating heads adding flexibility
$48,340.00
$46,395.00
  • High speed gears are made of Nickel-Chrome Steel and are heat-treated and ground for durability
  • Extra auxiliary dial for spindle feed depth indication, allows review of spindle feed depth, .0394" to 7.874"
  • Special spindle balance mechanism, superior to traditional balance mechanism and extends Balance Spring life
    Coolant system
  • CSA Electrics Standard
  • Equipped with hydraulic separate clamping unit. Vertical movement of arm is coordinated by an IC timer. With a single touch on push button switch, you can have the arm unclamped then move vertically, or stop then clamp automatically. Very easy to operate, and tools will always stay at the same point after tool shifting
  • Powerful 5 Hp, 2-speed, heavy-duty spindle drive motor
  • Special automatic tool eject device is supplied to allow you to change tools quickly. (No drifter is required) Special arm elevating device is provided to prevent arm from falling down abruptly after years of usage
    Coolant system
  • CSA Electrics Standard
  • 5 Hp TEFC Motor, with Brake (full stop from max. speed within 10 seconds)
  • 1" (25.4mm) Chevron type Blade Guides with Back-Up Roller
  • Blade Speed Indicator
  • Two (2) Year Limited Warranty
  • Enclosed Worm Gear Drive for Trouble-free Operation
  • Self-Centering Vise with Angle Scale
  • Heavy Duty Sheet Metal Base
  • Two (2) Year Limited Warranty