Category
Country of Origin

Cantek

Cantek 7.5HP Pneumatic Overarm Pin Router SR750 at Elite Metal Tools
Cantek 7.5HP Pneumatic Overarm Pin Router SR750
  • Chuck to Table Top Maximum: 11″
  • Throat Clearance: 29.5″
  • Spindle Speeds (2 Speeds): 10,000 / 20,000 RPM
  • Spindle Travel: 3.75″
$15,120
As low as $299.22/mo
View Details
Cantek Classic S Single Phase 37” x 60” Wide Belt Sander S371 at Elite Metal Tools
Cantek Classic S Single Phase 37” x 60” Wide Belt Sander S371
  • Main Motor: 10 HP
  • Working Width: 36″
  • Minimum Part Length: 12.5″
  • Maximum Thickness Opening: 5.9″
$20,685
As low as $409.35/mo
View Details
Cantek 10’ Sliding Table Saw with Programmable Rip Fence D405ANC at Elite Metal Tools
Cantek 10’ Sliding Table Saw with Programmable Rip Fence D405ANC
  • Programmable rip fence with maximum cutting width of 51”
  • Motorized blade rise/fall
  • Motorized blade tilting with electronic angle display on control panel
  • 7.5 HP main motor with 1HP scoring motor
$20,265
As low as $401.04/mo
View Details
Cantek 7.5HP 20” Miter Cut-Off Saw PCM508 at Elite Metal Tools
Cantek 7.5HP 20” Miter Cut-Off Saw PCM508
  • Cutting Angles: +60° ~ 0° ~-60°
  • Cycle Speed: 30-45 cuts/min
  • Saw Blade Size: 20″
  • Saw Arbor Diameter: 1″
$19,845
As low as $392.73/mo
View Details
Cantek 10HP 230V 18” Pneumatic Cut-Off Saw with Foot Pedal Control (LH or RH) PCS18 at Elite Metal Tools
Cantek 10HP 230V 18” Pneumatic Cut-Off Saw with Foot Pedal Control (LH or RH) PCS18
  • Cutting Capacity (Thickness x Width): 2″ x 12″, 3″ x 11″, 4″ x 10″
  • Cycle Speed: 45 strokes/min
  • Cycle Operation: Air
  • Saw Blade Size (Optional): 18″
$8,190
As low as $266.17/mo
View Details
Cantek 230V Single Phase 29FPM Automatic Compact Edgebander with Quick-Change Glue Pot MX340 at Elite Metal Tools
Cantek 230V Single Phase 29FPM Automatic Compact Edgebander with Quick-Change Glue Pot MX340
  • Panel thickness: 0.315” - 1.77”
  • Min panel length: 6.7”
  • Working table height: 33.5”
  • Dust collection outlet: Ø 5” x 2 = 1200 CFM 
$26,565
As low as $525.72/mo
View Details
Cantek 7-Roll Variable Speed Power Feeder for Short Stock Feeding DC70 at Elite Metal Tools
Cantek 7-Roll Variable Speed Power Feeder for Short Stock Feeding DC70
  • Roller Size: Ø60 x 60 mm (Ø2.36″ x 2.36″)
  • Roller: 7
  • Feeding Speed: 2 – 26 M/min (7 – 86 FPM)
  • Horse Power: 2/3 HP
$1,963.50
As low as $63.81/mo
View Details
Cantek 5 HP Single Phase 5’ Sliding Table Saw with Scoring P30 at Elite Metal Tools
Cantek 5 HP Single Phase 5’ Sliding Table Saw with Scoring P30
  • Sliding table dimension: 63” x 12.4”
  • 5 HP Single Phase main motor with ¾ HP scoring motor
  • Cutting width – ripping: 51” max
  • 0-45° Manual Tilting adjustment for main saw blade
$10,080
As low as $327.60/mo
View Details
Cantek Three Phase 16” Wide Double Surface Planer GT400BRD at Elite Metal Tools
Cantek Three Phase 16” Wide Double Surface Planer GT400BRD
  • Maximum working Width: 16” (16” & 40” Wide – optional)
  • Maximum working Thickness: 6.7” (16” & 20” Thickness – optional)
  • Cutterhead diameter: 4”
  • Table size: 19” x 86”
$30,030
As low as $594.29/mo
View Details
Cantek Three Roll Single Phase Variable Speed Power Feeder DC30 at Elite Metal Tools
Cantek Three Roll Single Phase Variable Speed Power Feeder DC30
  • 230V Single Phase 2/3 HP DC Brushless Servo Motor
  • Variable speed 2-22 M/min (7-72 FPM)
  • Roller Size: Φ120 x 60 mm (Standard)
  • Includes US13 Heavy Duty Universal Stand
$1,495
As low as $48.58/mo
View Details
Cantek 15HP Three Phase 32” Heavy Duty Spiral Cutterhead Planer P815HV (3PH) at Elite Metal Tools
Cantek 15HP Three Phase 32” Heavy Duty Spiral Cutterhead Planer P815HV (3PH)
  • Maximum Planing Width: 32”
  • Maximum Planing Thickness: 11-13/16″
  • Minimum Planing Thickness: 3/8”
  • Max. Depth of Cut: 5/16″
$34,440
As low as $681.56/mo
View Details
Cantek 0.67HP 230V Single Phase 4 Roll Variable Speed Power Feeder with Smart Stand DS400 (230V 1PH) at Elite Metal Tools
Cantek 0.67HP 230V Single Phase 4 Roll Variable Speed Power Feeder with Smart Stand DS400 (230V 1PH)
  • 1/2 HP DC Brushless Servo Motor with electronic speed display
  • (4) rubber feed rollers
  • Range of Speeds (50Hz) (60Hz): 7-72 FPM
  • Rollers: Φ120 x 25 mm x 8 rolls (split)
$2,724.75
As low as $88.55/mo
View Details
Cantek 7.5 HP Three Phase 10’ Sliding Table Saw with Scoring D405M-10 at Elite Metal Tools
Cantek 7.5 HP Three Phase 10’ Sliding Table Saw with Scoring D405M-10
  • 7.5 hp three phase main motor with 1 hp scoring motor
  • Max rip cutting width: 51.2”
  • Sliding table dimension: 126″ x 14.9″
  • Blade tilting adjustment: 0°~45°
$14,910
As low as $484.57/mo
View Details
Cantek 2HP 115V Single Phase 4,400 lb. Capacity 4ft x 8ft Scissor Lift PH48-2 at Elite Metal Tools
Cantek 2HP 115V Single Phase 4,400 lb. Capacity 4ft x 8ft Scissor Lift PH48-2
  • Deck Size: 47” x 94”
  • Lowered Height: 14”
  • Raised Height: 71”
  • Travel: 58”
$8,995
As low as $292.33/mo
View Details
Cantek SRN-Series 230V Three Phase Heavy-Duty 53”x75” Widebelt Planer-Sander with Variable Feed Speed SR1300NDA at Elite Metal Tools
Cantek SRN-Series 230V Three Phase Heavy-Duty 53”x75” Widebelt Planer-Sander with Variable Feed Speed SR1300NDA
  • 1st main motor (planer): 40 HP 
  • Min part length: 16.9”
  • Feed speed (variable): 13 to 59 FPM
  • Pass line height: 37” 
$98,280
As low as $1,944.96/mo
View Details
Cantek SRN-Series 460V Three Phase Heavy-Duty 53”x75” Widebelt Planer-Sander with Variable Feed Speed SR1300NDA at Elite Metal Tools
Cantek SRN-Series 460V Three Phase Heavy-Duty 53”x75” Widebelt Planer-Sander with Variable Feed Speed SR1300NDA
  • 1st main motor (planer): 40 HP 
  • Min part length: 16.9”
  • Feed speed (variable): 13 to 59 FPM
  • Pass line height: 37” 
$98,280
As low as $1,944.96/mo
View Details
Cantek 25” x 24” Double Surface Planer GT635ARD-24 at Elite Metal Tools
Cantek 25” x 24” Double Surface Planer GT635ARD-24
  • 25″ x 24″ capacity
  • Cast-iron machine body and table for vibration free cutting
  • Top planing head motor: 25 HP
  • Feed speed (variable): 26-80 FPM
$54,600
As low as $1,080.53/mo
View Details
Cantek 10HP Three Phase 16” Tilt Arbor Table Saw TA16B at Elite Metal Tools
Cantek 10HP Three Phase 16” Tilt Arbor Table Saw TA16B
  • Max. depth of cut at 90°: 5 1/2″
  • Max. depth of cut at 45°: 3 7/8″
  • Table size: 48″x 38″
  • Table height: 34 1/4″
$6,510
As low as $211.57/mo
View Details
Cantek 230V Single Phase Bandsaw/Resaw Feeder AF-19N at Elite Metal Tools
Cantek 230V Single Phase Bandsaw/Resaw Feeder AF-19N
  • Number of rollers: 2 (7-7/8″ dia.)
  • Feed speeds: 10
  • Motor: 1/2 HP (230/1/60)
  • Max. roller stroke: 8″
$4,100.25
As low as $133.25/mo
View Details
Cantek 25” x 8” Double Surface Planer GT635ARD-8 at Elite Metal Tools
Cantek 25” x 8” Double Surface Planer GT635ARD-8
  • 25″ x 8″ capacity
  • Cast-iron machine body and table for vibration free cutting
  • Top planing head motor: 25 HP
  • Feed speed (variable): 26-80 FPM
$41,895
As low as $829.10/mo
View Details
Cantek 230V Single Phase 36” Wide Belt Sander with 60” Belt C371 at Elite Metal Tools
Cantek 230V Single Phase 36” Wide Belt Sander with 60” Belt C371
  • Abrasive belt size: 37” x 60” 
  • Main motor: 10HP 
  • Feed speed (variable): 13 to 52 FPM
  • Max thickness opening: 5”
$23,625
As low as $467.53/mo
View Details
Cantek 230V Three Phase 36” Wide Belt Sander with 60” Belt C371 at Elite Metal Tools
Cantek 230V Three Phase 36” Wide Belt Sander with 60” Belt C371
  • Abrasive belt size: 37” x 60” 
  • Main motor: 20HP 
  • Feed speed (variable): 13 to 52 FPM
  • Max thickness opening: 5”
$22,155
As low as $438.44/mo
View Details
Cantek 10 HP Three Phase 24” Heavy Duty Planer with Spiral Cutterhead P630HV at Elite Metal Tools
Cantek 10 HP Three Phase 24” Heavy Duty Planer with Spiral Cutterhead P630HV
  • Maximum planing width: 24-3/4"
  • Maximum planing thickness: 11-13/16"
  • Max. depth of cut: 5/16"
  • Table size: 27" x 34"
$19,530
As low as $386.49/mo
View Details
Cantek 7.5 HP Three Phase 24” Planer with Spiral Cutterhead P24HV at Elite Metal Tools
Cantek 7.5 HP Three Phase 24” Planer with Spiral Cutterhead P24HV
  • Max. width: 24"
  • Max. thickness: 8"
  • Feed speed: 20 & 30 FPM
  • Main motor: 7 ½ HP
$12,915
As low as $419.73/mo
View Details

First opening in 1991 and since then have become an internationally acclaimed brand and a pioneer of the global market. They are located in Antalya, Turkey. Cantek is a big supplier of solid wood and panel machinery. They have made a big expansion in their company in the past 31 years in the woodworking machinery industry. 

If you are interested in woodworking saws or anything else Cantek has to offer please contact us. Here at Elite Metal Tools we work our hardest to satisfy all questions and have low prices.