Cantek

  • Layout
Cantek 5 HP Single Phase 10’ Sliding Table Saw with Scoring D405M-10 at Elite Metal Tools
Cantek 5 HP Single Phase 10’ Sliding Table Saw with Scoring D405M-10
  • 5 hp three phase main motor with 1 hp scoring motor
  • Max rip cutting width: 51.2”
  • Sliding table dimension: 126″ x 14.9″
  • Blade tilting adjustment: 0°~45°
$13,335.00
As low as $433/mo
View Details
Cantek 5HP 230V 14” Pneumatic Cut-Off Saw with Foot Pedal Control (LH or RH) PCS14 at Elite Metal Tools
Cantek 5HP 230V 14” Pneumatic Cut-Off Saw with Foot Pedal Control (LH or RH) PCS14
  • Cutting Capacity (Thickness x Width): 1″ x 10″, 2″ x 9″, 3″ x 8″
  • Cycle Speed: 95 strokes/min
  • Cycle Operation: Air
  • Saw Blade Size: 14″
$6,300.00
As low as $204/mo
View Details
Cantek 5 HP Single Phase 10’ Sliding Table Saw with Scoring P305 at Elite Metal Tools
Cantek 5 HP Single Phase 10’ Sliding Table Saw with Scoring P305
  • 5 HP single phase main motor with 1 HP scoring motor
  • 51″ rip capacity
  • Sliding table dimensions: 10 ft. x 14”
  • Blade tilt: 0 – 45°
$10,500.00
As low as $341/mo
View Details
Cantek 7.5 HP Three Phase 10’ Sliding Table Saw with Scoring D405M-10 at Elite Metal Tools
Cantek 7.5 HP Three Phase 10’ Sliding Table Saw with Scoring D405M-10
  • 7.5 hp three phase main motor with 1 hp scoring motor
  • Max rip cutting width: 51.2”
  • Sliding table dimension: 126″ x 14.9″
  • Blade tilting adjustment: 0°~45°
$13,335.00
As low as $433/mo
View Details
Cantek 5 HP Single Phase 8’ Sliding Table Saw with Scoring D405M-8 at Elite Metal Tools
Cantek 5 HP Single Phase 8’ Sliding Table Saw with Scoring D405M-8
  • 5 hp single phase main motor with 1 hp scoring motor
  • Max rip cutting width: 51.2”
  • Sliding table dimension: 102.4″ x 14.9″
  • Blade tilting adjustment: 0°~45°
$12,705.00
As low as $412/mo
View Details
Cantek 10’ Sliding Table Saw with Programmable Rip Fence D405ANC at Elite Metal Tools
Cantek 10’ Sliding Table Saw with Programmable Rip Fence D405ANC
  • Programmable rip fence with maximum cutting width of 51”
  • Motorized blade rise/fall
  • Motorized blade tilting with electronic angle display on control panel
  • 7.5 HP main motor with 1HP scoring motor
$17,220.00
As low as $340/mo
View Details
Cantek 5 HP Single Phase 5’ Sliding Table Saw with Scoring P30 at Elite Metal Tools
Cantek 5 HP Single Phase 5’ Sliding Table Saw with Scoring P30
  • Sliding table dimension: 63” x 12.4”
  • 5 HP Single Phase main motor with ¾ HP scoring motor
  • Cutting width – ripping: 51” max
  • 0-45° Manual Tilting adjustment for main saw blade
$8,925.00
As low as $290/mo
View Details
Cantek 5HP 230V Single Phase 12” Tilt Arbor Table Saw TA12 at Elite Metal Tools
Cantek 5HP 230V Single Phase 12” Tilt Arbor Table Saw TA12
  • Max. depth of cut at 90°: 4″
  • Max. depth of cut at 45°: 2 3/4″
  • Table size: 48″x30″
  • Electrics: 230/1/60
$3,780.00
As low as $122/mo
View Details
Cantek 10’ Sliding Table Saw with Programmable Rip Fence D405ANC at Elite Metal Tools
Cantek 10’ Sliding Table Saw with Programmable Rip Fence D405ANC
  • Programmable rip fence with maximum cutting width of 51”
  • Motorized blade rise/fall
  • Motorized blade tilting with electronic angle display on control panel
  • 7.5 HP main motor with 1HP scoring motor
$17,220.00
As low as $340/mo
View Details
Cantek 7.5HP 20” Miter Cut-Off Saw PCM508 at Elite Metal Tools
Cantek 7.5HP 20” Miter Cut-Off Saw PCM508
  • Cutting Angles: +60° ~ 0° ~-60°
  • Cycle Speed: 30-45 cuts/min
  • Saw Blade Size: 20″
  • Saw Arbor Diameter: 1″
$17,850.00
As low as $353/mo
View Details
Cantek 10HP Three Phase 16” Tilt Arbor Table Saw TA16B at Elite Metal Tools
Cantek 10HP Three Phase 16” Tilt Arbor Table Saw TA16B
  • Max. depth of cut at 90°: 5 1/2″
  • Max. depth of cut at 45°: 3 7/8″
  • Table size: 48″x 38″
  • Table height: 34 1/4″
$5,880.00
As low as $191/mo
View Details
Cantek 15HP 230V 30” Pneumatic Cut-Off Saw with Foot Pedal Control (LH or RH) PCS30 at Elite Metal Tools
Cantek 15HP 230V 30” Pneumatic Cut-Off Saw with Foot Pedal Control (LH or RH) PCS30
  • Cutting Capacity (Thickness x Width): 2″x27″, 4″x24″, 6″x21″, 8″x16″, 10”x10”
  • Cycle Speed: 10-15 strokes/min
  • Cycle Operation: Pneumatic
  • Saw Blade Size: 30”
$18,795.00
As low as $371/mo
View Details
Cantek 15HP 230V 24” Pneumatic Cut-Off Saw with Foot Pedal Control (LH or RH) PCS24 at Elite Metal Tools
Cantek 15HP 230V 24” Pneumatic Cut-Off Saw with Foot Pedal Control (LH or RH) PCS24
  • Cutting Capacity (Thickness x Width): 2″x21″, 4″x19″, 6″x15″, 7″x8″
  • Cycle Speed: 40 strokes/min
  • Cycle Operation: Air / mechanical
  • Saw Blade Size: 24″ max. (20″ min.)
$13,860.00
As low as $450/mo
View Details
Cantek 10HP Three Phase 14” Tilt Arbor Table Saw TA1214 at Elite Metal Tools
Cantek 10HP Three Phase 14” Tilt Arbor Table Saw TA1214
  • Max. depth of cut at 90°: 5″
  • Max. depth of cut at 45°: 3 1/2″
  • Table size: 48″x 38″
  • Table height: 34 1/4″
$5,460.00
As low as $177/mo
View Details
Cantek 10HP 230V 18” Pneumatic Cut-Off Saw with Foot Pedal Control (LH or RH) PCS18 at Elite Metal Tools
Cantek 10HP 230V 18” Pneumatic Cut-Off Saw with Foot Pedal Control (LH or RH) PCS18
  • Cutting Capacity (Thickness x Width): 2″ x 12″, 3″ x 11″, 4″ x 10″
  • Cycle Speed: 45 strokes/min
  • Cycle Operation: Air
  • Saw Blade Size (Optional): 18″
$6,930.00
As low as $225/mo
View Details
Cantek 5 HP Three Phase 10’ Sliding Table Saw with Scoring P305 at Elite Metal Tools
Cantek 5 HP Three Phase 10’ Sliding Table Saw with Scoring P305
  • 5 HP three phase main motor with 1 HP scoring motor
  • 51″ rip capacity
  • Sliding table dimensions: 10 ft. x 14”
  • Blade tilt: 0 – 45°
$10,185.00
As low as $331/mo
View Details
Cantek 7.5 HP Three Phase 8’ Sliding Table Saw with Scoring D405M-8 at Elite Metal Tools
Cantek 7.5 HP Three Phase 8’ Sliding Table Saw with Scoring D405M-8
  • 7.5 hp three phase main motor with 1 hp scoring motor
  • Max rip cutting width: 51.2”
  • Sliding table dimension: 102.4″ x 14.9″
  • Blade tilting adjustment: 0°~45°
$12,600.00
As low as $409/mo
View Details
Cantek 10’ Sliding Table with Powered Rise and Fall D405A at Elite Metal Tools
Cantek 10’ Sliding Table with Powered Rise and Fall D405A
  • 7.5 HP main motor with 1HP scoring motor
  • Motorized blade rise/fall
  • Motorized blade tilting with electronic angle display on control panel
  • Sliding table dimension: 126” x 15 ½”
$14,910.00
As low as $484/mo
View Details
Cantek 10HP 24” Miter Cut-Off Saw PCM610 at Elite Metal Tools
Cantek 10HP 24” Miter Cut-Off Saw PCM610
  • Cutting Angles: +60° ~ 0° ~ -60°
  • Cycle Speed: 35-40 cuts/min
  • Saw Blade Size: 24″
  • Saw Arbor Diameter: 1″
$28,140.00
As low as $556/mo
View Details
Cantek 15HP 460V 24” Pneumatic Cut-Off Saw with Foot Pedal Control (LH or RH) PCS24 at Elite Metal Tools
Cantek 15HP 460V 24” Pneumatic Cut-Off Saw with Foot Pedal Control (LH or RH) PCS24
  • Cutting Capacity (Thickness x Width): 2″x21″, 4″x19″, 6″x15″, 7″x8″
  • Cycle Speed: 40 strokes/min
  • Cycle Operation: Air / mechanical
  • Saw Blade Size: 24″ max. (20″ min.)
$14,385.00
As low as $467/mo
View Details
Cantek 3 HP Single Phase 10” Tilt Arbor Table Saw TA10 at Elite Metal Tools
Cantek 3 HP Single Phase 10” Tilt Arbor Table Saw TA10
  • Table size: 36″x27″
  • Max. rip to right of blade: 50″
  • Max. depth of cut at 90°: 3″
  • Max. depth of cut at 45°: 2″
$2,940.00
As low as $95/mo
View Details
Cantek 5 HP Three Phase 5’ Sliding Table Saw with Scoring P30 at Elite Metal Tools
Cantek 5 HP Three Phase 5’ Sliding Table Saw with Scoring P30
  • Sliding table dimension: 63” x 12.4”
  • 5 HP Three Phase main motor with ¾ HP scoring motor
  • Cutting width – ripping: 51” max
  • 0-45° Manual Tilting adjustment for main saw blade
$8,925.00
As low as $290/mo
View Details
Cantek 7.5HP Three Phase 14” Tilt Arbor Table Saw TA14 at Elite Metal Tools
Cantek 7.5HP Three Phase 14” Tilt Arbor Table Saw TA14
  • Max. depth of cut at 90°: 5″
  • Max. depth of cut at 45°: 3 1/2″
  • Table size: 48″x 38″
  • Table height: 34 1/4″
$5,145.00
As low as $167/mo
View Details
Cantek 5 HP Three Phase 10” Tilt Arbor Table Saw TA10 at Elite Metal Tools
Cantek 5 HP Three Phase 10” Tilt Arbor Table Saw TA10
  • Table size: 36″x27″
  • Max. rip to right of blade: 50″
  • Max. depth of cut at 90°: 3″
  • Max. depth of cut at 45°: 2″
$3,045.00
As low as $98/mo
View Details

First opening in 1991 and since then have become an internationally acclaimed brand and a pioneer of the global market. They are located in Antalya, Turkey. Cantek is a big supplier of solid wood and panel machinery. They have made a big expansion in their company in the past 31 years in the woodworking machinery industry. 

If you are interested in woodworking saws or anything else Cantek has to offer please contact us. Here at Elite Metal Tools we work our hardest to satisfy all questions and have low prices.