Cantek

  • Layout
Cantek 10 HP 230V Single Blade Rip Saw 303S at Elite Metal Tools
Cantek 10 HP 230V Single Blade Rip Saw 303S
  • Saw blade diameter: 8 – 12″
  • Feed speeds: 3 (50, 65, 85 FPM)
  • Table size: 30″ x 50″
  • Table height: 31-7/8″
$15,750
As low as $311.69/mo
View Details
Cantek 5 HP Single Phase 10’ Sliding Table Saw with Scoring D405M-10 at Elite Metal Tools
Cantek 5 HP Single Phase 10’ Sliding Table Saw with Scoring D405M-10
  • 5 hp three phase main motor with 1 hp scoring motor
  • Max rip cutting width: 51.2”
  • Sliding table dimension: 126″ x 14.9″
  • Blade tilting adjustment: 0°~45°
$14,595
As low as $474.33/mo
View Details
Cantek 5 HP Single Phase 8’ Sliding Table Saw with Scoring D405M-8 at Elite Metal Tools
Cantek 5 HP Single Phase 8’ Sliding Table Saw with Scoring D405M-8
  • 5 hp single phase main motor with 1 hp scoring motor
  • Max rip cutting width: 51.2”
  • Sliding table dimension: 102.4″ x 14.9″
  • Blade tilting adjustment: 0°~45°
$13,965
As low as $453.86/mo
View Details
Cantek 10’ Sliding Table Saw with Programmable Rip Fence D405ANC at Elite Metal Tools
Cantek 10’ Sliding Table Saw with Programmable Rip Fence D405ANC
  • Programmable rip fence with maximum cutting width of 51”
  • Motorized blade rise/fall
  • Motorized blade tilting with electronic angle display on control panel
  • 7.5 HP main motor with 1HP scoring motor
$19,005
As low as $376.10/mo
View Details
Cantek 5 HP Single Phase 10’ Sliding Table Saw with Scoring P305 at Elite Metal Tools
Cantek 5 HP Single Phase 10’ Sliding Table Saw with Scoring P305
  • 5 HP single phase main motor with 1 HP scoring motor
  • 51″ rip capacity
  • Sliding table dimensions: 10 ft. x 14”
  • Blade tilt: 0 – 45°
$11,550
As low as $375.37/mo
View Details
Cantek 5 HP Single Phase 5’ Sliding Table Saw with Scoring P30 at Elite Metal Tools
Cantek 5 HP Single Phase 5’ Sliding Table Saw with Scoring P30
  • Sliding table dimension: 63” x 12.4”
  • 5 HP Single Phase main motor with ¾ HP scoring motor
  • Cutting width – ripping: 51” max
  • 0-45° Manual Tilting adjustment for main saw blade
$9,765
As low as $317.36/mo
View Details
Cantek 7.5 HP Three Phase 10’ Sliding Table Saw with Scoring D405M-10 at Elite Metal Tools
Cantek 7.5 HP Three Phase 10’ Sliding Table Saw with Scoring D405M-10
  • 7.5 hp three phase main motor with 1 hp scoring motor
  • Max rip cutting width: 51.2”
  • Sliding table dimension: 126″ x 14.9″
  • Blade tilting adjustment: 0°~45°
$14,595
As low as $474.33/mo
View Details
Cantek 2HP 115V Single Phase 4,400 lb. Capacity 4ft x 8ft Scissor Lift PH48-2 at Elite Metal Tools
Cantek 2HP 115V Single Phase 4,400 lb. Capacity 4ft x 8ft Scissor Lift PH48-2
  • Deck Size: 47” x 94”
  • Lowered Height: 14”
  • Raised Height: 71”
  • Travel: 58”
$8,820
As low as $286.65/mo
View Details
Cantek 10HP Three Phase 16” Tilt Arbor Table Saw TA16B at Elite Metal Tools
Cantek 10HP Three Phase 16” Tilt Arbor Table Saw TA16B
  • Max. depth of cut at 90°: 5 1/2″
  • Max. depth of cut at 45°: 3 7/8″
  • Table size: 48″x 38″
  • Table height: 34 1/4″
$6,510
As low as $211.57/mo
View Details
Cantek 12” 230V Glue Line Ripsaw C12RSH at Elite Metal Tools
Cantek 12” 230V Glue Line Ripsaw C12RSH
  • Feed speeds variable: 50 to 120 FPM
  • Maximum workpiece thickness: 3.35″
  • Minimum workpiece length: 8″
  • Table size: 39″ x 57″
$22,785
As low as $450.91/mo
View Details
Cantek 60 HP 230V Multi Ripsaw MRS-12 at Elite Metal Tools
Cantek 60 HP 230V Multi Ripsaw MRS-12
  • Saw Motor: 60 HP 230 volt
  • Feed Speeds: 25 – 100 FPM
  • Table Size: 30” x 60″
  • Table Height from floor: 33.5″
$50,190
As low as $993.26/mo
View Details
Cantek 10HP Three Phase 14” Tilt Arbor Table Saw TA1214 at Elite Metal Tools
Cantek 10HP Three Phase 14” Tilt Arbor Table Saw TA1214
  • Max. depth of cut at 90°: 5″
  • Max. depth of cut at 45°: 3 1/2″
  • Table size: 48″x 38″
  • Table height: 34 1/4″
$5,985
As low as $194.51/mo
View Details
Cantek 15HP 460V Three Phase Bottom Cutting Straight Line Ripsaw R16 at Elite Metal Tools
Cantek 15HP 460V Three Phase Bottom Cutting Straight Line Ripsaw R16
  • Maximum Sawblade Diameter: 14”
  • Maximum Cutting Thickness: 3”
  • Sawblade Bore: 2"
  • Number of Pressure Rolls: 8 rolls
$27,510
As low as $544.42/mo
View Details
Cantek 5HP 230V Single Phase 12” Tilt Arbor Table Saw TA12 at Elite Metal Tools
Cantek 5HP 230V Single Phase 12” Tilt Arbor Table Saw TA12
  • Max. depth of cut at 90°: 4″
  • Max. depth of cut at 45°: 2 3/4″
  • Table size: 48″x30″
  • Electrics: 230/1/60
$4,095
As low as $133.08/mo
View Details
Cantek 10’ Sliding Table Saw with Programmable Rip Fence D405ANC at Elite Metal Tools
Cantek 10’ Sliding Table Saw with Programmable Rip Fence D405ANC
  • Programmable rip fence with maximum cutting width of 51”
  • Motorized blade rise/fall
  • Motorized blade tilting with electronic angle display on control panel
  • 7.5 HP main motor with 1HP scoring motor
$19,005
As low as $376.10/mo
View Details
Cantek 2HP 115V Single Phase 4,400 lb. Capacity 3ft x 6ft Scissor Lift PH36-2 at Elite Metal Tools
Cantek 2HP 115V Single Phase 4,400 lb. Capacity 3ft x 6ft Scissor Lift PH36-2
  • Deck Size: 35” x 71”
  • Lowered Height: 12”
  • Raised Height: 59”
  • Travel: 47”
$7,245
As low as $235.46/mo
View Details
Cantek 7.5 HP Three Phase 8’ Sliding Table Saw with Scoring D405M-8 at Elite Metal Tools
Cantek 7.5 HP Three Phase 8’ Sliding Table Saw with Scoring D405M-8
  • 7.5 hp three phase main motor with 1 hp scoring motor
  • Max rip cutting width: 51.2”
  • Sliding table dimension: 102.4″ x 14.9″
  • Blade tilting adjustment: 0°~45°
$13,860
As low as $450.45/mo
View Details
Cantek 10’ Sliding Table with Powered Rise and Fall D405A at Elite Metal Tools
Cantek 10’ Sliding Table with Powered Rise and Fall D405A
  • 7.5 HP main motor with 1HP scoring motor
  • Motorized blade rise/fall
  • Motorized blade tilting with electronic angle display on control panel
  • Sliding table dimension: 126” x 15 ½”
$16,380
As low as $324.16/mo
View Details
Cantek 5 HP Three Phase 10’ Sliding Table Saw with Scoring P305 at Elite Metal Tools
Cantek 5 HP Three Phase 10’ Sliding Table Saw with Scoring P305
  • 5 HP three phase main motor with 1 HP scoring motor
  • 51″ rip capacity
  • Sliding table dimensions: 10 ft. x 14”
  • Blade tilt: 0 – 45°
$11,235
As low as $365.13/mo
View Details
Cantek 50 HP 230V 12" Multi Ripsaw MRS-300 at Elite Metal Tools
Cantek 50 HP 230V 12" Multi Ripsaw MRS-300
  • Maximum Cutting Width: 11.8” (300mm)
  • Saw Motor HP: 50 HP – Voltage 230/3/60
  • Feed Speeds: 25 – 100 FPM (7.5~30 m/min)
  • Table Size: 60″ x 30” (1530x760mm)
$41,685
As low as $824.94/mo
View Details
Cantek 3 HP Single Phase 10” Tilt Arbor Table Saw TA10 at Elite Metal Tools
Cantek 3 HP Single Phase 10” Tilt Arbor Table Saw TA10
  • Table size: 36″x27″
  • Max. rip to right of blade: 50″
  • Max. depth of cut at 90°: 3″
  • Max. depth of cut at 45°: 2″
$3,150
As low as $102.37/mo
View Details
Cantek 20HP 230V Bottom Cutting Straight Line Ripsaw with 10’ Guarantee Glue Line R18 (20HP) at Elite Metal Tools
Cantek 20HP 230V Bottom Cutting Straight Line Ripsaw with 10’ Guarantee Glue Line R18 (20HP)
  • Minimum Length: 6″
  • Maximum Sawblade Diameter: 18″
  • Sawblade Included with Machine: 14″
  • Sawblade Bore: 2″
$32,760
As low as $648.32/mo
View Details
Cantek 12” 460V Glue Line Ripsaw C12RSH at Elite Metal Tools
Cantek 12” 460V Glue Line Ripsaw C12RSH
  • Feed speeds variable: 50 to 120 FPM
  • Maximum workpiece thickness: 3.35″
  • Minimum workpiece length: 8″
  • Table size: 39″ x 57″
$22,785
As low as $450.91/mo
View Details
Cantek 5 HP Three Phase 5’ Sliding Table Saw with Scoring P30 at Elite Metal Tools
Cantek 5 HP Three Phase 5’ Sliding Table Saw with Scoring P30
  • Sliding table dimension: 63” x 12.4”
  • 5 HP Three Phase main motor with ¾ HP scoring motor
  • Cutting width – ripping: 51” max
  • 0-45° Manual Tilting adjustment for main saw blade
$9,765
As low as $317.36/mo
View Details

First opening in 1991 and since then have become an internationally acclaimed brand and a pioneer of the global market. They are located in Antalya, Turkey. Cantek is a big supplier of solid wood and panel machinery. They have made a big expansion in their company in the past 31 years in the woodworking machinery industry. 

If you are interested in woodworking saws or anything else Cantek has to offer please contact us. Here at Elite Metal Tools we work our hardest to satisfy all questions and have low prices.