Cantek

  • Saw blade diameter: 8 – 12″
  • Feed speeds: 3 (50, 65, 85 FPM)
  • Table size: 30″ x 50″
  • Table height: 31-7/8″
$14,910
As low as $484.57/mo
  • 5 hp three phase main motor with 1 hp scoring motor
  • Max rip cutting width: 51.2”
  • Sliding table dimension: 126″ x 14.9″
  • Blade tilting adjustment: 0°~45°
$13,965
As low as $453.86/mo
  • 5 hp single phase main motor with 1 hp scoring motor
  • Max rip cutting width: 51.2”
  • Sliding table dimension: 102.4″ x 14.9″
  • Blade tilting adjustment: 0°~45°
$13,335
As low as $433.38/mo
  • Programmable rip fence with maximum cutting width of 51”
  • Motorized blade rise/fall
  • Motorized blade tilting with electronic angle display on control panel
  • 7.5 HP main motor with 1HP scoring motor
$18,060
As low as $357.40/mo
  • 5 HP single phase main motor with 1 HP scoring motor
  • 51″ rip capacity
  • Sliding table dimensions: 10 ft. x 14”
  • Blade tilt: 0 – 45°
$11,025
As low as $358.31/mo
  • Sliding table dimension: 63” x 12.4”
  • 5 HP Single Phase main motor with ¾ HP scoring motor
  • Cutting width – ripping: 51” max
  • 0-45° Manual Tilting adjustment for main saw blade
$9,345
As low as $303.71/mo
  • 7.5 hp three phase main motor with 1 hp scoring motor
  • Max rip cutting width: 51.2”
  • Sliding table dimension: 126″ x 14.9″
  • Blade tilting adjustment: 0°~45°
$13,965
As low as $453.86/mo
  • Max. depth of cut at 90°: 5 1/2″
  • Max. depth of cut at 45°: 3 7/8″
  • Table size: 48″x 38″
  • Table height: 34 1/4″
$6,195
As low as $201.33/mo
  • Saw Motor: 60 HP 230 volt
  • Feed Speeds: 25 – 100 FPM
  • Table Size: 30” x 60″
  • Table Height from floor: 33.5″
$46,830
As low as $926.76/mo
  • Feed speeds variable: 50 to 120 FPM
  • Maximum workpiece thickness: 3.35″
  • Minimum workpiece length: 8″
  • Table size: 39″ x 57″
$21,420
As low as $423.90/mo
  • Max. depth of cut at 90°: 5″
  • Max. depth of cut at 45°: 3 1/2″
  • Table size: 48″x 38″
  • Table height: 34 1/4″
$5,670
As low as $184.27/mo
  • Maximum Sawblade Diameter: 14”
  • Maximum Cutting Thickness: 3”
  • Sawblade Bore: 2"
  • Number of Pressure Rolls: 8 rolls
$26,040
As low as $515.33/mo
  • Programmable rip fence with maximum cutting width of 51”
  • Motorized blade rise/fall
  • Motorized blade tilting with electronic angle display on control panel
  • 7.5 HP main motor with 1HP scoring motor
$18,060
As low as $357.40/mo
  • Max. depth of cut at 90°: 4″
  • Max. depth of cut at 45°: 2 3/4″
  • Table size: 48″x30″
  • Electrics: 230/1/60
$3,885
As low as $126.26/mo
  • 7.5 hp three phase main motor with 1 hp scoring motor
  • Max rip cutting width: 51.2”
  • Sliding table dimension: 102.4″ x 14.9″
  • Blade tilting adjustment: 0°~45°
$13,230
As low as $429.97/mo
  • 7.5 HP main motor with 1HP scoring motor
  • Motorized blade rise/fall
  • Motorized blade tilting with electronic angle display on control panel
  • Sliding table dimension: 126” x 15 ½”
$15,645
As low as $309.61/mo
  • 5 HP three phase main motor with 1 HP scoring motor
  • 51″ rip capacity
  • Sliding table dimensions: 10 ft. x 14”
  • Blade tilt: 0 – 45°
$10,710
As low as $348.07/mo
  • Maximum Cutting Width: 11.8” (300mm)
  • Saw Motor HP: 50 HP – Voltage 230/3/60
  • Feed Speeds: 25 – 100 FPM (7.5~30 m/min)
  • Table Size: 60″ x 30” (1530x760mm)
$39,060
As low as $772.99/mo
  • Table size: 36″x27″
  • Max. rip to right of blade: 50″
  • Max. depth of cut at 90°: 3″
  • Max. depth of cut at 45°: 2″
$3,045
As low as $98.96/mo
  • Sliding table dimension: 63” x 12.4”
  • 5 HP Three Phase main motor with ¾ HP scoring motor
  • Cutting width – ripping: 51” max
  • 0-45° Manual Tilting adjustment for main saw blade
$9,345
As low as $303.71/mo
  • Feed speeds variable: 50 to 120 FPM
  • Maximum workpiece thickness: 3.35″
  • Minimum workpiece length: 8″
  • Table size: 39″ x 57″
$21,420
As low as $423.90/mo
  • Table size: 36″x27″
  • Max. rip to right of blade: 50″
  • Max. depth of cut at 90°: 3″
  • Max. depth of cut at 45°: 2″
$3,045
As low as $98.96/mo
  • Minimum Length: 6″
  • Maximum Sawblade Diameter: 18″
  • Sawblade Included with Machine: 14″
  • Sawblade Bore: 2″
$31,185
As low as $617.15/mo
  • Saw Motor: 60 HP 460 volt
  • Feed Speeds: 25 – 100 FPM
  • Table Size: 30” x 60″
  • Table Height from floor: 33.5″
$46,830
As low as $926.76/mo

First opening in 1991 and since then have become an internationally acclaimed brand and a pioneer of the global market. They are located in Antalya, Turkey. Cantek is a big supplier of solid wood and panel machinery. They have made a big expansion in their company in the past 31 years in the woodworking machinery industry. 

If you are interested in woodworking saws or anything else Cantek has to offer please contact us. Here at Elite Metal Tools we work our hardest to satisfy all questions and have low prices.