Baileigh Industrial

• Variable Speed Bench Top Lathe
• Precision Ground And Hardened Ways
• 3 And 4 Chuck
• Steady And Follow Rests

• Spindle Bore: 1.1
• Speeds: 50-2250 rpm (variable)
• Spindle Stroke: 2"
• Tailstock Quill Travel: 2"

• 7.5 hp motor with 4 speeds: 3,000, 4,000, 5,000, and 6,000 rpm.
• Set the RPM by manually moving the belts to different gears.
• Digital readout (DRO) shows the blade speed to help with repeatability.
• Comes standard with a 12” blade, but accepts up to a huge 16” blade.

• 12" Blade
• 3600 RPM
• Maximum rip cut (right) 52"
• 220V, 1PH

• Coolant System With Splash Guard 
• Follow Rest 
• 8" Four Jaw Chuck / 6" Three Jaw Chuck 
• Steady Rest

• Actual Working Area 23.6” x 35.4” x 5.12”
• Table Size (Length) 53.5"
• Table Size (Width) 43.25"
• Spindle Air cooled spindle

3 HP
4300 RPM
220 V 1PH
5/8" Saw Harbo

• 220V Single Phase
• 5 Horse Power
• 5" Dust Collection Port
• 16/20 FPM

• 2111 CFM
• 220V Single Phase
• 3 hp
• 8"x4" Dust Collection Port

• 1800 RPM
• 3HP
• Feed Speed 20 - 79 FPM
• 220V, 1PH

• 6000 CFM
• 10HP
• 5 Ports
• 2 Drums - 63 Gallons Each

• 5000 Rpm
• 220V Single Phase
• 3 Horse Power
• 4" Dust Collection Port

• 220v 3 Phase
• Air Cooled Spindle
• Working Area 97" x 48"
• Tool Diameters ER32

• Chuck Diameter: 4"
• Tool Slide Travel: 1.378"
• Max. Swing Over Bed: 7"
• Distance Between Centers: 13.8"

• Actual Working Area: 96.5" x 50.5
• Spindle: Air Cooled
• Z Axis Stroke: 8"
• Maximum Moving Speed (Inches Per Minute): 394

• Table Size (Width) 18.5"
• Swing 20"
• Spindle MT4
• Drill Capacity 1.25"

• 2-Axis Digital Readout
• 6" Three Jaw Chuck and 8" Four Jack Chuck
• Face Plate
• Steady Rest And Follow Rest

• 72" Forming Width
• 9- Gauge Mild Steel Capacity
• 3 Driven Rolls
• Hydraulic Back Roll

• 6" Three Jaw Chuck
• 8" Four Jaw Chuck
• Face Plate
• Steady and Follow Rest

• Number of Outlets: 2 @ 4"
• Speeds: 1560 RPM
• Max Stock Width: 37"
• Maximum Stock Height: 5-1/4"

• Table Size: 16.5" x 18.5"
• Swing: 20"
• Spindle Speeds: 12-220 to 3200 rpm
• Distance from Spindle to Table: 26" 

• 4' Rolling Width
• Roll up to 3 gauge (1/4" mild sheet steel)
• Digital readout
• 3 HP

• 110/220V Single Phase (Prewired 110V)
• 1.5 Horse Power
• 2 Oulets
• 4" Dust Collection Port

• 110V
• .5 x 2 Horse Power
• 1790 x 2 CFM
• 484 lbs