Baileigh Industrial

• 3.5 HP Motor
• 3 Driven Rolls
• Pipe Capacity: Size: 2.5" (sch. 40) / Min. Dia.: 48"
• 220V Single Phase

• Pipe Capacity: 1.5" (sch. 40) / Min. Dia.: 28"
• Round Tube Capacity: 2" (0.078") / Min. Dia.: 27.55"
• Square Tube Capacity: 1.5" (0.078") / Min. Dia.: 39"
• Solid Round Capacity: 1.375" / Min. Dia.: 24"

• Hydraulic Adjustment Of Top Roll 
• Inverter Driven 
• Varible Speed
• Digital Readout

• Actual Working Area: 96.5" x 50.5
• Spindle: Air Cooled
• Z Axis Stroke: 8"
• Maximum Moving Speed (Inches Per Minute): 394

• 220v 3 Phase
• Air Cooled Spindle
• Working Area 97" x 48"
• Tool Diameters ER32

• Three Driven Rolls 
• Inverter Driven 
• Variable Speed 
• Vertical And Horizontal Bending 

• Table Size (Width) 18.5"
• Swing 20"
• Spindle MT4
• Drill Capacity 1.25"

• Overload Protected 
• Hydraulic Lateral Angle Guides 
• Three Driven Rolls 
• Many Optional Tooling Sets Available 

• Table Size: 16.5" x 18.5"
• Swing: 20"
• Spindle Speeds: 12-220 to 3200 rpm
• Distance from Spindle to Table: 26" 

• Driven Rolls 3
• Roll Adjustment Hydraulic
• Pipe Capacity Size: 8" (sch. 40) / Min. Dia.: 98"
• Square Tube Capacity Size: 5.875" (.375")

• Driven Rolls 2
• Roll Adjustment Manual
• Pipe Capacity Size: .5” (sch.40) / Min. Dia.: 14”
• Round Tube Capacity Size: 1" (.0625") Min. Dia.: 16"

• Three Driven Rolls 
• Foot Pedal Controlled 
• Hdraulic Drive 
• Vertical And Horizontal Bending 

• Hydraulic Adjustments 
• Vertical And Horizontal Bender 
• Foot Pedal Controlled 
• Digital Readout 

• Vertical And Horizontal Bending 
• Digital Readout 
• Integrated Stiffening Rods 
• Three Driven Rolls 

• Driven Rolls 2
• Roll Adjustment Manual
• Pipe Capacity Size: .5” (sch.40) / Min. Dia.: 14”
• Round Tube Capacity Size: 1" (.0625") Min. Dia.: 16"

• 110V
• 1 HP
• 15" Swing
• .625" Drill Capacity

• Maximum Load Capacity: 132 lbs.
• Spindle Speeds: Variable
• Drilling Capacity: 3/4" Mild Steel
• Chuck Capacity: 0.03" - 0.625" (B16)

• 41/4" Capacity
• Pneumatic centering vise, hydraulic blade descent
• Automatic shut-off and vise release
• 220V, 3PH

• 110V
• 0.75 Horse Power
• 11.8 Max Stock Width
• 45 Degree Table Tilt

• Miters left and right 
• Centering vise 
• Cuts non-ferrous metals 
• Blade turns at 3200 rpm

• 220V Single Phase
• 3 Horse Power
• 2 Outlets
• 4" Dust Collection Port

• Power 220V/3-Phase 
• Digital Readout 
• Three Driven Rolls 
• Foot Pedal Controlled 

The CS-C485SA is a 16-1/2" vertical column cold saw and is a semi automatic machine that uses a Yaskawa® inverter drive to control the saw blade speed up to 120 rpm's. This cold saw comes standard with an industrial grade coolant system, drive motor and hydraulic feeding system that will provide decades of profitable use to any demanding fabrication or machine shop.

• Motor Hp 1.5
• Filter Type Four Stage (Stainless steel mesh - Aluminum mesh - Pre-pleated filter - HEPA filter)
• Number of Filters 4
• Filter Size Stainless steel mesh(21.8" x 11.6")- Aluminum mesh(21.25" x 17.25" x 7/8") - Pre-pleated filter(23.3" x 23.3" x 1.5") - HEPA filter(24" x 24" x 11.5")
• Power 110V