Baileigh Industrial

• Combination Shear, Sheet Metal Brake, And Slip Roll
• 52" Forming Width
• 16-Gauge Mild Steel Capacity
• Segmented Fingers On Brake

• Combination Shear, Sheet Metal Brake and Slip Roll
• 52" Forming Width
• 20-Gauge Mild Steel Capacity
• Segmented Fingers On Brake

• High-Carbon, High-Chromium Blades
• Front and Back Gauges
• Front Support Arms With Squaring Bar
• Automatic and Single-Stroke Operations With Jog Mode

• Back Gauge Length: 24"
• Thickness (SS): 14 ga. (18 ga.)
• Strokes Per Minute: 35
• Front Gauge Length: 24"

• 52" x 10-Gauge Mild Steel Capacity
• Back and Side Gauges
• Hydraulic
• 220V / 1PH

• Back Gauge Length: 33"
• Thickness (SS): 16 ga. (20 ga.)
• Front Gauge Length: 20"
• Blade Angle: 1°

• Back Gauge Length: 24"
• Thickness (SS): 16 ga. (20 ga.)
• Working Height: 32"
• Front Gauge Length: 24"

• 120" x 10-Gauge Mild Steel Capacity
• Front and Back Gauges
• Hydraulic Operations
• 220V / 3-Phase Motor

• High-Carbon, High-Chromium Blades
• Front and Back Gauges
• Front Support Arms With Squaring Bar
• 26 Strokes Per Minute

• High-Carbon, High-Chromium Blades
• Front and Back Gauges
• Front Support Arms With Squaring Bar
• Automatic And Single Stroke Operations With Jog Mode

• Rolling Capacity: 20 ga. (0.036”)
• Shear Capacity: 20 ga. (0.036”)
• Bending Capacity: 20 ga. (0.036”)
• Finger Lengths: 1", 2-1/8", 3-1/8", 6", 8", 10-1/8"

• Rolling Capacity: 20 ga. (0.036”)
• Shear Capacity: 20 ga. (0.036”)
• Min. Rolling Dia.: 1.70”
• Bending Capacity: 20 ga. (0.036”)

• 60" x 14-Gauge Mild Steel Capacity
• Back and Side Gauges
• Hydraulic Operation
• 220V, 3-Phase

• Built For Years and Years of Production
• 7.5 HP Motor
• Jog, Single or Continuous Cutting Modes
• Side Gauges

• 10 Gauge Mild Steel Capacity
• 13 Powerful Hold Downs Clamps
• Multiple Cutting Edges Allowing for Longer Blade Life
• Can Be Operated In Jog, Single-Cycle, or Continuous Cycle Mode

• 52" x 1/4"-Mild Steel Capacity
• Front and Back Gauges
• Fast Blade Gap Adjustment
• 220 / 3-Phase

• 70" x 1/4" Mild Steel Capacity
• Front Material Gauges
• Fast Blade Gap Adjustment
• Shadow Line for Material Placement

• Miters left and right 
• Centering vise 
• Cuts non-ferrous metals 
• Blade turns at 3200 rpm

• 41/4" Capacity
• Pneumatic centering vise, hydraulic blade descent
• Automatic shut-off and vise release
• 220V, 3PH

• Back Gauge Length: 24"
• Thickness (SS): 16 ga. (20 ga.)
• Front Gauge Length: 24"
• Blade Angle: 1°

The CS-C485SA is a 16-1/2" vertical column cold saw and is a semi automatic machine that uses a Yaskawa® inverter drive to control the saw blade speed up to 120 rpm's. This cold saw comes standard with an industrial grade coolant system, drive motor and hydraulic feeding system that will provide decades of profitable use to any demanding fabrication or machine shop.

• 28 Strokes Per Minute
• 8 Gauge Mild Steel Shearing Capacity
• Built For Heavy Duty Production
• 10 HP Motor

• 52" x 1/4" Mild Steel Capacity
• NC Back Gauge
• ELGO® Controller
• Front Material Guides

• 120" x 1/4" Mild Steel Capacity
• Front Material Guides
• Fast Blade Gap Adjustment
• Shadow Line For Material Placement