Baileigh Industrial

• Max. Drill Capacity: 2-1/2" (No.45 steel) & 2-7/8" (HT200 cast iron)
• Max. Tapping Capacity: 1-3/4" (No.45 steel) & 2" (HT200 cast iron)
• Distance from Spindle to Column Center: 13-3/4" to 63"
• Diameter of Column: 13.7"

• Variable-speed inverter-driven head
• 3-speed power down feed
• Auto reverse tapping feature
• Digital RPM readout

• 2" maximum drilling capacity
• Heavy duty construction
• Power down feed
• Large 63" column

• 1.57" maximum drilling capacity
• Heavy duty construction
• Power down feed
• 39.3" reach

• Spindle Speeds: Inverter Driven Variable
• Max. Drill Capacity: 1
• Tapping Capacity: 5/8"
• Drill Capacity Cast Iron: 1-1/16"

• 1.5HP Motor 
• 5/8" Tapping Capacity 
• 1" Drill Capacity 
• 5.3" Spindle Travel 

• 2.95" Quill Diameter 
• Spindle Speed 85-2000rpm 
• 2HP Motor 
• 1.5" Drill Capacity 

• Spindle Speed 150-3000rpm
• Spindle Travel 5.3" 
• Drill Capacity Steel 1" 
• Quill Diameter 2.44" 

• 41/4" Capacity
• Pneumatic centering vise, hydraulic blade descent
• Automatic shut-off and vise release
• 220V, 3PH

• Miters left and right 
• Centering vise 
• Cuts non-ferrous metals 
• Blade turns at 3200 rpm

• 2 hp motor runs on 220-volt 3-phase power.
• 26-3/4” swing to tackle large pieces of material
• Drills a maximum capacity of 1.57” with a tapping capacity of up to 1”
• Massive column and cast steel base reduce flexing even when you’re drilling at full capacity

The CS-C485SA is a 16-1/2" vertical column cold saw and is a semi automatic machine that uses a Yaskawa® inverter drive to control the saw blade speed up to 120 rpm's. This cold saw comes standard with an industrial grade coolant system, drive motor and hydraulic feeding system that will provide decades of profitable use to any demanding fabrication or machine shop.

• 1/8HP Coolant Motor 
• 1.5" Drill Capacity 
• 85-4000rpm Spindle Speed
• Tapping Capacity 3/4" 

• 3.5HP Motor 
• 1.5" Drill Capacity 
• 108-1800rpm Spindle Speed
• 7.48" Spindle Travel 

• Spindle Taper MT3
• Table Slot .625"
• Tapping Capacity 1/2"
• Main Motor 2 hp

• Spindle Travel: 5.9"
• Quill Diameter: 2.44”
• Tapping Capacity: 5/8"
• Drill Capacity: 1.25"

• 11" Blade
• Semi-Automatic operation - manual feed also available
• Self centering vice
• 2.75" Tube Capacity 

• Accepts Up To 17" Blade
• Semi-Automatic Operation
• Dual Miter Swivel Head
• Tool Gap Compensation Device

• Drill Capacity Steel: 1"
• Spindle Travel: 3"
• Base Size: 23" x 16"
• Rpm: 250, 700, 1150, 1900, & 2900

• Spindle Speeds: 5
• Spindle Taper: B16
• Rpm: 250, 700, 1150, 1900, & 2900
• Drill Capacity Steel: 5/8"

• Shear Capacity: 20 Gauge
• Perfect For Small Jobs
• 8" Bed
• Includes Back Gauge