Baileigh Industrial

• 7.5 hp motor with 4 speeds: 3,000, 4,000, 5,000, and 6,000 rpm.
• Set the RPM by manually moving the belts to different gears.
• Digital readout (DRO) shows the blade speed to help with repeatability.
• Comes standard with a 12” blade, but accepts up to a huge 16” blade.

• 12" Blade
• 3600 RPM
• Maximum rip cut (right) 52"
• 220V, 1PH

• Actual Working Area 23.6” x 35.4” x 5.12”
• Table Size (Length) 53.5"
• Table Size (Width) 43.25"
• Spindle Air cooled spindle

3 HP
4300 RPM
220 V 1PH
5/8" Saw Harbo

• 2111 CFM
• 220V Single Phase
• 3 hp
• 8"x4" Dust Collection Port

• 220V Single Phase
• 5 Horse Power
• 5" Dust Collection Port
• 16/20 FPM

• 1800 RPM
• 3HP
• Feed Speed 20 - 79 FPM
• 220V, 1PH

• 5000 Rpm
• 220V Single Phase
• 3 Horse Power
• 4" Dust Collection Port

• 6000 CFM
• 10HP
• 5 Ports
• 2 Drums - 63 Gallons Each

• 220v 3 Phase
• Air Cooled Spindle
• Working Area 97" x 48"
• Tool Diameters ER32

• Actual Working Area: 96.5" x 50.5
• Spindle: Air Cooled
• Z Axis Stroke: 8"
• Maximum Moving Speed (Inches Per Minute): 394

• Table Size (Width) 18.5"
• Swing 20"
• Spindle MT4
• Drill Capacity 1.25"

• Number of Outlets: 2 @ 4"
• Speeds: 1560 RPM
• Max Stock Width: 37"
• Maximum Stock Height: 5-1/4"

• Table Size: 16.5" x 18.5"
• Swing: 20"
• Spindle Speeds: 12-220 to 3200 rpm
• Distance from Spindle to Table: 26" 

• 110/220V Single Phase (Prewired 110V)
• 1.5 Horse Power
• 2 Oulets
• 4" Dust Collection Port

• 110V
• .5 x 2 Horse Power
• 1790 x 2 CFM
• 484 lbs

• 110V
• 1 Horse Power
• 1720 RPM
• 12" Swing

• 12-14" Blade
• 3000 - 5000 RPM
• 15' x 125" sliding table
• 220V, 3PH

• RPM 4800
• Fence Size 4" x 29"
• Maximum Rabbeting Capacity 1/2"
• Cutter Head Diameter 2-1/2"

• 110/220V 1 PH (Prewired 110V)
• 1.75 Horse Power
• Maximum Rip Cut (Right) 36"
• 4000 RPM

• Fence Size 43" x 6"
• Fence Tilt 45°
• Cutter Head Diameter 3"
• Max Stock Width 12"

• Actual Working Area: 20" x 30"
• 110v Motor
• Powerful 200 watt DC Brushless Motor
• Up to 20,000 rpm variable spindle speed

• 220V Three Phase
• 7.5 Horse Power
• 5700 Rpm
• 16 to 50 FPM

• Maximum Depth of Cut (Resaw): 1/8"
• Cutter Head Diameter: 3-1/4"
• Max Stock Width: 20"
• Maximum Stock Height: 8"