Acra Machinery

  • Quill Travel: 5"
  • Over Ram Travel: 12 1/4"
  • Cross Travel (Y Axis): 12 1/2"
  • Spindle RPM: 65~4,200 RPM
  • Cross Travel (Y Axis): 15 1/2"
  • Spindle Speed: Inf. Vari.
  • Quill Diameter: 4"
  • Voltage: 220V 1PH/3PH
  • Table Size: 87" X 20"
  • X, Y, Z Axis Travel: 59" X 24" X 27 1/2"
  • Spindle Vertical: #50 Taper
  • Spindle RPM Vertical: 45 ~ 1500
  • Table size: 9" x 50"
  • Spindle Nose: R-8
  • Spindle Speeds: 60 - 4,500 RPM
  • Ram Travel: 12
  • Voltage: 220V Or 440V
  • Cross Travel (Y Axis): 12 1/2"
  • Vertical Knee Travel (Z Axis): 16"
  • Spindle Motor: R-8 or #30 Taper
  • Table Size: 10” X 56”
  • X, Y, Z Axis Travel: 36” X 16 ½” X 5” 
  • Vertical/Horizontal Spindle: #40 NST
  • Voltage: 220 / 440V/ 3PH
  • Main Motor: 1 1/2 HP
  • Table 22" x 19 1/2"
  • Spindle Stroke: 5 1/8"
  • Spindle RPM: 60~1500 RPM
  • Table Size: 9” X 42” 
  • X, Y, Z Axis Travel: 30” X 12” X 23”
  • Motor: 3 H.P.
  • Spindle Nose: R-8
  • Drilling Steel: 2 9/16"
  • Drilling Cast Iron: 2 3/4"
  • Spindle Taper: MT #5
  • Spindle Travel: 44 7/8"
  • Table Size: 10” x 50”
  • X, Y, Z Axis Travel: 39” X 16” X 5”
  • Motor: 5 H.P.
  • Spindle RPM: 60 ~ 4,500 RPM
  • Drilling Capacity Steel: 1 1/2"
  • Drilling Capacity Cast Iron: 2"
  • Spindle Stroke: 7 7/8"
  • Spindle Speed (# Steps): (6) 88~1500RPM
  • Drilling Capacity Steel: 2"
  • Drilling Capacity Cast Iron: 2 3/8"
  • Spindle Feeds: 0.02~0.006 IPR
  • Spindle Diameter: 3 1/16"
  • Spindle Stroke: 9 7/8"
  • Spindle Feeds: 0.02~0.006 IPR
  • Horizontal Travel Of Headstock: 36"
  • Column Diameter: 11 7/8"
  • Drilling Steel: 2 9/16"
  • Drilling Cast Iron: 2 3/4"
  • Spindle Diameter: 2 1/2"
  • Spindle RPM: 35-1890
  • Drilling Steel: 3 1/8"
  • Drilling Cast Iron: 3 15/16"
  • Spindle Stroke: 450
  • Spindle RPM: 16-1250
  • Tapping Capacity Steel: 1 9/16"
  • Spindle Stroke: 9 7/8"
  • Spindle Speed (# Steps): (12) 44~1500 RPM
  • Voltage: 220V / 3 PH (2 Speed)
  • Drilling Steel: 2 1/8"
  • Drilling Cast Iron: 2 1/2"
  • Spindle Taper: MT #5
  • Spindle Travel: 9 7/8"

Acra machinery was founded in 1965, they have over 30 years of experience in manufacturing high quality manual and CNC machine tools such as Bandsaw, CNC Panel Bending Centre, Corner Notcher, Iron Worker, Laser Cutter, and Plasma Cutter. They also offer an extensive range of sheet metal machinery services. 

If you are interested in Sheet Metal Machinery services or any of Acra Machinerys’ high quality products please contact us. Elite metal tools will gladly assist you on any questions and provide you with impressive service.