SCM Group L’Invincibile 220V Three Phase 1¼” Tilting Spindle Shaper with 15” Eye-S Touch Screen Control TI 7

Features

• Electrospindle and SCM exclusive movement system: the electrospindle eliminates the routine maintenance required by conventional belt driven systems. The unique movement mechanism of the spindle (SCM patent) allows to independently change the tool height, even when tilted. The movements are controlled by screws with recirculating ball-bearings and linear guides, which guarantee a total absence of vibration and wear
• H-E version: HSK 63 rapid tool changer & 10HP electrospindle
• Rapid tool changeover: flexible and safe with a time saving of 75% in the machine set up compared to traditional systems. Maximum coupling precision with the double air jet system that keeps contact surfaces clean
• Tool detection system: setting up speedily and safely. This system eliminates any manual operation for setting up the required work allowing the operator to automatically input all the work data
• Eye-S console: the pleasure of controlling all machine functions from the control panel. The new control panel, with its attractive design, allows easy and intuitive machine programming, combining the 15” color touch-screen display and the Maestro active user interface
• Safety/Protections
  • Spindle protection for operations
  • Electronic brake ensuring stop, even in case of voltage drop
  • Safety sensors for changing tool operation, rotating stop control, tool taper locking/unlocking control
  • Safety microswitch on motor access door
  • Emergency pushbuttons
  • Main power switch can be locked in the off position with a padlock
  • Overload switch protection
  • 24V auxiliary low voltage control
  • “CSA” rated electrical components 

Standard Equipment

• Upper mobile control panel “Eye-S”
  • 15” touch-screen display
  • Control of the 6 working axes with manual, semi-automatic, and automatic modes
  • Storage capacity up to 1000 programs with relevant picture
  • Storage capacity up to 1000 tool with relevant picture
  • USB port
  • Pre-set for network connection
  • Tool peripheral speed management
  • Operator’s help for the more recurrent machining
• Automatic tool detecting system complete with mobile electromagnetic readout to identify the tool installed on the machine. With reference to the detected tool, the control can provide:
  • Saved programs associated to the detected tool
  • Max detected tool speed
  • Max strokes of every axis to avoid eventual collisions
  • Coordinates for the detected tool and define an origin (new zero point for the machine) on three different points of the tool profile chosen by the operator
• “FLEX” fence with automatic adjustment managed by electronic control: move the entire fence with reference to the tool diameter. Adjust the infeed fence in reference to the requested removal. The FLEX system allows to exclude of the fence from worktable. Includes aluminum profiling fence with connecting bars
• Electric presetting for feeder support
• Reverse spindle rotation
• “FAST” section table with automatic adjustment managed from control
• Automatic star-delta start
• H-E version with:
  • 10HP – 7.5kW electrospindle
  • HSK 63B rapid tool changer
  • Inverter for electronic programming of the shaft rotating speed from 900 to 12000 rpm
  • No.1 tool-holder shaft with HSK 63B taper, complete with electronic device (transponder) for the tool detection system
  • Air blower system to maintain cleaned coupling contact surface
• SCM exclusive system for the electrospindle movement
  • Vertical shaft movement on two linear precision guides through preloaded recirculating ball bearing pads
  • Tilting from -45.5° to +45.5° with “dove-tail” arch-formed cast-iron fence
  • Movement through recirculating ball screw (SCM patent pending)
• Autotransformer for 220V - 400V
• (1) HSK 63B 1¼” spindle
• Toolbox: wrenches, allen wrenches, user manual, spare parts catalog 

Specifications

• Worktable dims: 47.19” x 29.5”
• Motor power: 10HP – 7.5kW
• Spindle tilting: ± 45.50°
• Working length of spindle: 5.5”
• Spindle base projection from table with interch spindle: 2.12”
• Max tool diam retractable under worktable: 11.75” x 2.94”
• Exhaust outlets diameter
  • Spindle hood: 4.69”
  • Machine base: 5.87”
  • Machine base: 3.94”
• Nominal extraction air consumption: 1500 CFM
• Air exhaust speed: 66 ft/s
• Pneumatic operating pressure: 6 bar
• Electrical Requirements: 220V Three Phase 60Hz
• Machine Dims: 69” x 57” x 85”
• Approx Weight: 2,840 lbs

Optional Add-Ons

• “LL” version for profiling
• Carriage on fix table for small tenoning operations
• Manual feeder support (horizontal/vertical movement)
• FEED 4i Feeder
• N.1 tool-holder shaft with HSK 63B taper
• HSK 63B right tool taper, complete with ring, without collet
• HSK 63B left tool taper, complete with ring, without collet
• Mobile trolley for tool-holder shaft with HSK 63B taper
• 15HP – 11kW electrospindle
• Feeder support with automatic adjustments
• PRO-10 “TL” version for tenoning-profiling
• Presetting for AIGNER fences
• Barcode reader 

**This machine requires a mandatory installation and training from the manufacturer. This comes as an additional charge that is NOT included in the website price. This additional charge includes the installation and full training on how to operate and maintain the machine. Please contact one of our sales representatives for more details**