Ebac Industrial Orion 900W Mobile Commercial Restoration Dehumidifier 10270GR-US

Description

The EIPL Orion Professional Dehumidifier is the ideal unit for commercial work. Its compact size permits one man operation, yet has the capacity to handle several room-size areas at a time. Best of all its affordably priced within the budget of most restoration specialists. The EIPL Orion Dehumidifier is a rugged, yet mobile, piece of equipment that will operate under extreme conditions and pull large amounts of moisture from the air. The Orion incorporates an “Air to Air” Heat Exchange which provides a secondary level of pre-cooling. The high capacity backward curved fan will maximize air delivery over long distances. Whenever there is a need for fast dependable, energy-efficient drying, EIPL can provide the answer. The high efficiency Rotary compressor ensures the maximum extraction with the lowest running costs.

Application

• Flood & Restoration
• Roof Leaks
• Basements / Cellars
• Rental Yards
• Vehicle Storage
• Hotels
• Stores
• Laboratories
• Offices

How the Orion Works

EIPL dehumidifiers are effective solutions to environmental control problems. The Orion dehumidifier, with its 2 stage cooling process and temperature sensitive defrost control, ensures optimum performance throughout the unit’s full operating temperature range. Moisture is removed from the air through an efficient refrigeration process. The fan draws the moist air through and “Air to Air” heat exchanger, where the incoming air is pre-cooled. The air is then drawn through the evaporator coil which further cools the air below its dew point. Moisture forms on the evaporator coil and is collected in the condensate tray. The cooled air then passes through the hot condenser coil where it is reheated using the same energy removed during the cooling phase, plus the additional heat generated by the compressor. The air is, therefore, discharged from the dehumidifier at a slightly higher temperature with a lower absolute humidity than that which entered. Continuous circulation of air through the dehumidifier gradually reduces the relative humidity within the area

Features

• High Capacity.
• High efficiency, Low Amp Draw Rotary Compressor.
• 2 stage air cooling with “Air to Air” heat exchange.
• High Static Backward Curved Fan.
• Extra long power cord complete with AGFI Plug.
• Temperature Sensitive Defrost control for optimum performance.
• Effective, reverse cycle defrosting feature which automatically melts away frost buildup providing effective operation at low ambient temperatures.
• Rugged, epoxy powder-coated steel chassis and housing.
• Washable Air Filter.
• Integral Condensate Pump with Purge Feature.
• On / Off Control
• Fitted Mains GFI Plug
• Rugged Wheels
• 25’ Length Power Cord
• Quite Operation
• Low Amp Draw
• Integral Condensate Pump
• Pump Purge Switch
• Quick Release Hose Coupling
• 25’ Length of PVC Drain Hose
• Hours Run Meter
• Power Cord Wraps
• Optional Duct attachment

Specifications

• Height: 44” (736mm)
• Width: 24” (508mm)
• Depth: 22” (381mm)
• Weight: 165 lbs (75kg)
• Voltage: 115V
• Phase: 1
• Frequency: 60 Hz
• Current: 8A
• Power: 900W
• Airflow - High Speed: 538cfm (914m3/hr)
• Airflow – Low Speed: 437cfm (743m3/hr)
• Noise Level: 57 dba
• Refrigerant: R407c
• Effective Volume: 10,594 cu.ft (300m3)
• Typical Extraction: 105 ppd
• Min Operating Temp: 33°F (1°C)
• Max Operating Temp: 105°F (40°C)

Additional Accessories

• Part #1027018: Duct Attachment - Dual 155mm dia
• Part #1027019: Duct Attachment - Single 8"dia