Ebac Industrial DD1200 460V 11800W High Capacity High Efficiency Desiccant Dehumidifier 10541GR-US

Description

The DD1200 is the largest desiccant dehumidifier within the EIPL range. The unit incorporates a high capacity resistive heater ensuring maximum drying is immediately reached and constantly maintained while the unit is running. The DD1200 incorporates two EC fans with variable speed allowing the unit to be easily installed and commissioned in a wide variety of installations. An electronic thermostat allows the user to select the desired drying level ie, high efficiency drying, deep drying, or high extraction. Facility for an external humidistat allows remote control of the drying cycle All models incorporate a high efficiency patented PPS Rotor. This design incorporates an 82% active Silica Gel to ensure optimum performance over the equipment’s wide operating range of environments. All desiccant rotors supplied by EIPL are washable and designed for high performance / long life.

Application

• Offices
• Shops
• Restaurants
• Warehouses
• Basements
• Factories
• De-Flooding
• Pharmaceutical
• Defense Industry
• Confectionary
• Laboratories
• Medical
• Food Industry
• Agriculture
• Cold Stores
• Hospitals
• Hotels
• Stadiums
• Ships

How the DD1200 Works

Dehumidification is possible using two possible principles, Condensation with refrigeration style dehumidifiers and Adsorption with desiccant dehumidifiers. Desiccant dehumidifiers perform exceptionally well when used in cooler climates, or when a low dew-point, deep drying or low humidity levels are required. Since desiccant dehumidifiers do not produce water, they will work effectively down to sub zero temperatures. Their operation is simplistic yet extremely effective and reliable. Air (Process Air) is drawn into the dehumidifier, where is passes over a wheel impregnated with Silica Gel. As the air passes over this wheel, any moisture present in the air, is absorbed into the Silica Gel wheel before leaving the dehumidifier as warm dry air. The Silica Gel wheel is continually, slowly rotating, typically at three revolutions per hour. As the wheel rotates a small portion passes through the regeneration segment. During this phase a second air stream (Regeneration Air) is heated to a high temperature before passing over the wheel. Any moisture present in the wheel is released into this air stream, this hot wet air is then exhausted outside the area being dried.

Features

• On/Off Control
• Adjustable Thermostat
• Electronic Controls
• Manual / Automatic Mode Selection
• Remote Humidity Sensor Facility
• Hours Run Meter
• EC High Efficiency Fans
• Variable Fan Speeds
• High Capacity PTC Heaters
• Process / Regen Air Filter
• Rubber Anti-Vibration Feet
• Dual Air Inlet Design
• Free Standing
• Status Indicators
• Self Contained
• High Temperature Safety Cut-outs

Specifications

• Height: 56”
• Width: 28”
• Depth: 23”
• Weight: 200 lbs
• Voltage: 460V
• Current: 15A
• Phase: 3
• Frequency: 60 Hz
• Power: 11800W
• Process Airflow Max – Dry Air: 883 cfm
• Process Airflow Nominal – Dry Air: 705 cfm
• Regen Airflow Nominal – Wet Air: 195 cfm
• Process Air Outlet Dia: 8”
• Regen Air Outlet Dia: 6”
• Rotor Wheel Speed: 13.6 rph
• Rotor Size dia X depth: 13.8” X 7.9”
• High Extraction Setting @ 27°C 60%: 562 ppd
• High Efficiency Setting @ 27°C 60%: 402 ppd
• Deep Drying Settings @ 27°C 60%: 508 ppd
• Typical Dry Air Off – High Extraction Setting: 9%
• Typical Dry Air Off – High Efficiency Setting: 12%
• Typical Dry Air Off – Deep Drying Settings: 5%
• Min Operating Temp: -4°F
• Max Operating Temp: 104°F

Additional Accessories

• Part#3035157: Mechanical Humidistat - Internal Sensor
• Part #3035160: Electronic Humidistat - Internal Sensor
• Part #3035162: Electronic Humidistat - External Sensor