Description
The EIPL CD100E range are versatile workhorses, designed to eliminate high humidity problems in harsh environments. Warehouses, storage rooms, electrical and communications switching stations, locker rooms, basements, pumping stations, offshore oil rigs and active and laid-up marine vessels have all found this rugged range of units to be more than adequate for the tasks. Its unique “Reverse Cycle” defrosting feature, the CD100 range of units will function smoothly in temperatures down to 33°F without frost build-up. Designed to survive under adverse conditions and to deliver the goods, this unit will effectively remove more than ninety pints of airborne water vapor per day under standard conditions (80°F, 60%RH), and will exceed 20 gallons per day under extreme conditions found in problem environments. The impressive CD100 range can be easily moved from site to site, or can be permanently mounted and ducted to suit a variety of applications.
Application
- Warehouse
- Basements
- Factories
- Storage Areas
- Laboratories
- Oil Rigs
- Pimping Stations
- Stadiums
How the CD100E Works
EIPL dehumidifiers are effective solutions to environmental control problems. The CD100 range of units are high capacity dehumidifiers, made to operate at high efficiencies by removing moisture from the air through the refrigeration process. The fan draws the moist air through the cold evaporator coil, which cools the air below its dew point. Moisture forms on the evaporator coil and is collected in the condensate tray before draining away through the condensate tube. The cooled air then passes through the hot condenser coil where it is reheated using the same energy removed during the cooling phase, plus the additional heat generated by the compressor. The air is, therefore, discharged from the dehumidifier at a slightly higher temperature with a lower absolute humidity than that which entered. Continuous circulation of air through the dehumidifier gradually reduces the relative humidity within the area. Because the CD100 range of units are equipped with an internal humidistat, they automatically switch on and off to save energy and expense by maintaining the desired level of humidity with intermittent operation.
The additional features of the CD100E make the unit the ideal choice for installations where remote monitoring is required. The alarm humidistat can be adjusted and preset during the installation process and will provide means of identifying a high humidity condition. This unit is also supplied complete with a wall mount bracket and installation kit. The compact physical size and high performance, makes the CD100 family the ideal choice.
Features
- A rugged epoxy-coated, steel chassis.
- A “floating” compressor for vibration and mobility protection.
- An adjustable humidistat to control the level of dryness desired.
- System lamps to tell the operating status of the unit at a glance.
- EIPL’s unique “Reverse Cycle” defrosting system, for effective operation in low ambient temperatures.
- Standard 115V power requirements for operation in any location.
- On/Off Control (Via The Humidistat)
- Electronic Defrost Control
- Compressor Type: Reciprocating
- Fitted Mains Plug
- Free Standing
- Wall Mounting Bracket
- Hours Run Meter
- High Level Cut-out Switch
- Voltage Free Remote Alarm Connector
- Power On Indicator
- Concealed Humidistat (Alarm & Control)
- Adjustable Alarm Humidistat
- Gravity Drain (1/2” O/D)
Specifications
- Height: 16” (406mm)
- Width: 36” (914mm)
- Depth: 20” (508mm)
- Weight: 135 lbs (61kg)
- Voltage: 110V
- Phase: 1
- Frequency: 60 Hz
- Current: 16A
- Power: 1090W
- Airflow: 700 CFM (1190m3/hr)
- Noise Level: 66 dba
- Refrigerant: R407c
- Effective Volume: 10,594 cu.ft (300m3)
- Typical Extraction: 97 ppd
- Min Operating Temp: 33°F (1°C)
- Max Operating Temp: 95°F (35°C)
