Advanced Radiant Systems RS 120V 9ft 45,000 BTU Residential Garage Infrared Heater RS2-45-U20

Description

Advanced Radiant Systems’ Residential Range (RS) is exactly what it sounds like; a residential grade, unitary infrared heater. The RS is designed to optimize performance as well as aesthetics. The compact, preassembled, unitary design and custom mounting brackets make for a simple and minimally invasive installation. With lower output capacities, comfortable designs are easily maintained at lower hanging heights. For the best results in any residential application, the RS Range has no equal.

Unpack, Hang, Connect

• Preassembled construction means simplified installation
• Balanced flue construction
  • One exhaust penetration
  • Maximum safety
• Low cost to install

Features

• Direct spark ignition
• Self-diagnostic ignition module
• Aluminized (HT) radiant tube
• Thermostat and gas flex connector included
• 50% less cost to operate vs. forced air
• Quick snow melting and dryer floors
• Approval Standards
  • The RS heater has been specifically designed for residential garage and workshop applications and approved to CSA’s stringent residential requirements.
• Balanced Flue Construction
  • The flue pipe for the RS heater is installed concentrically inside the combustion air inlet pipe. This construction:
    • Preheats the combustion air, making the RS heater the most efficient heater of its class.
    • Limits wall penetrations to one, 4” hole, making installation simple and economical.
    • Exposes inlet air and outlet gases to the same pressure conditions resulting in unparalleled safety and trouble-free operation.

Standard Equipment

• Preassembled burner and heat exchanger
• Ceiling suspension hardware
• Gas flex connector
• Thermostat
• 8ft Venting Kit

Included Accessories

• Polished Aluminum Reflectors
• Chain Sets
• Ball Valve
• Flex Connectors
• Vent Adapters
• Thermostat

Specifications

• Fire Rate (BTU/HR): 45,000
• Heat Exchanger Length: 9 ft
• Reflector Configurations
  • Minimum Clearance to Combustibles
    • 0° Angle
      • Top: 2”
      • Side 1: 18”
      • Side 2: 18”
      • Below: 36”
    • 45° Angle
      • Top: 3”
      • Side 1: 3”
      • Side 2: 48”
      • Below: 48”
• Gas Supply
  • Inlet Pressure
    • Natural Gas
      • Minimum: 5.0” W.C.
      • Maximum: 14.0” W.C.
    • Propane Gas
      • Minimum: 11.5” W.C.
      • Maximum: 14.0” W.C.
  • Manifold Pressure
    • Natural Gas: 3.5” W.C.
    • Propane Gas: 10.5” W.C.
  • Inlet Connection’
    • Natural Gas or Propane Gas: 1/2” NPT
• Electric Supply: 120 V AC, 60 HZ, 1 Amp: 36” cord, grounded 3 prong plug
• Flue and Outside Air Connection: 2” plastic flue adapter provided at the heater
• Weight: 109 lbs.
• Dimensions (L x W x H): 113” x 24” x 40”

Options

• Outdoor/decorative grille kits
• Vertical vent adapter