Radial Arm Drills

  • Drilling Capacity Steel: 1 1/2"
  • Drilling Capacity Cast Iron: 2"
  • Spindle Stroke: 7 7/8"
  • Spindle Speed (# Steps): (6) 88~1500RPM
$18,720.90
As low as $370.48/mo
  • Spindle taper: MT4
  • Spindle stroke: 9.05”
  • Quill diameter: 3.15”
  • Spindle speeds (12): 44-1500 rpm 
$25,065
As low as $496.03/mo
  • Spindle Stroke: 9 7/8"
  • Spindle Feeds: 0.02~0.006 IPR
  • Horizontal Travel Of Headstock: 36"
  • Column Diameter: 11 7/8"
$35,192.30
As low as $696.45/mo
  • Spindle taper: MT4
  • Spindle stroke: 8.66”
  • Quill diameter: 2.95”
  • Spindle speeds (6): 88, 154, 282, 455, 796, 1500 rpm 
$18,599
As low as $368.07/mo
  • Diameter to Column: 17”
  • Head Travel: 61”
  • Column to Spindle: 78”
  • Motor: 220V, 7.5 HP
$112,860
As low as $2,233.49/mo
  • Diameter to Column: 17”
  • Head Travel: 61”
  • Column to Spindle: 78”
  • Motor: 440V, 7.5 HP
$112,860
As low as $2,233.49/mo
  • Drilling Capacity Steel: 2"
  • Drilling Capacity Cast Iron: 2 3/8"
  • Spindle Feeds: 0.02~0.006 IPR
  • Spindle Diameter: 3 1/16"
$28,311.80
As low as $560.29/mo
  • Drilling depth (max.): 16”
  • Drilling capacity : 3.15”
  • Speed range: 30 rpm – 1400 rpm
  • Motor rating main drive : 10.1 Hp
$113,554.91
As low as $2,247.25/mo
  • Spindle taper: 5MT
  • Spindle stroke: 14.6”
  • Quill diameter: 3.94”
  • Spindle speeds (12): 36-1890 rpm 
$84,670
As low as $1,675.61/mo
  • Drilling capacity : 1.57”
  • Table set up area: 47” x 20”
  • Number of T-slots: 3 positions
  • T-slots, width: 0.7”
$57,929.72
As low as $1,146.42/mo
  • Drilling Steel: 3 1/8"
  • Drilling Cast Iron: 3 15/16"
  • Spindle Stroke: 450
  • Spindle RPM: 16-1250
$177,666.50
As low as $3,516.02/mo
  • Spindle taper: MT4
  • Spindle stroke: 9.84”
  • Quill diameter: 3.15”
  • Spindle speeds (12): 44-1500 rpm 
$32,560
As low as $644.36/mo
  • Drilling capacity: 1.57”
  • Drilling depth (max): 10”
  • Arm stroke (vertical): 25”
  • Motor rating main drive: 3HP
$37,661.94
As low as $745.32/mo
  • Drilling Steel: 2 9/16"
  • Drilling Cast Iron: 2 3/4"
  • Spindle Diameter: 2 1/2"
  • Spindle RPM: 35-1890
$117,333.70
As low as $2,322.03/mo
  • Drilling Depth (max): 16”
  • Drilling Capacity: 3.15”
  • Speed Range: 30-1,400 rpm
  • Motor Rating Main Drive: 10.1 HP
$130,932.69
As low as $2,591.15/mo
  • Tapping Capacity Steel: 1 9/16"
  • Spindle Stroke: 9 7/8"
  • Spindle Speed (# Steps): (12) 44~1500 RPM
  • Voltage: 220V / 3 PH (2 Speed)
$38,043.50
As low as $752.88/mo
  • Spindle taper: 5MT
  • Spindle stroke: 14.6”
  • Quill diameter: 3.94”
  • Spindle speeds (12): 36-1890 rpm 
$90,425
As low as $1,789.51/mo
  • Friction type disc clutch absorbs impact force caused by vertical movement of spindle, and protects all transmission units inside gear box. With quick spindle return, the clutch will help speed-up the tapping operation
  • Special automatic tool eject device is supplied to allow you to change tools quickly. (No drifter is required) Special arm elevating device is provided to prevent arm from falling down abruptly after years of usage
    Coolant system
  • Equipped with hydraulic separate clamping unit. Vertical movement of arm is coordinated by an IC timer. With a single touch on push button switch, you can have the arm unclamped then move vertically, or stop then clamp automatically. Very easy to operate, and tools will always stay at the same point after tool shifting
  • CSA Electrics Standard
$166,335
As low as $3,291.76/mo
  • Spindle taper: 5MT
  • Spindle stroke: 14.6”
  • Quill diameter: 3.94”
  • Spindle speeds (12): 35-1890 rpm 
$108,980
As low as $2,156.71/mo