Marvel 3 HP 230V Three Phase Horizontal Mitering Band Saw S330/3HV

Specifications and Features

• Capacity at 90°: 12” H x 18” W Rectangle, 13” Round.
• Capacity at 45°: 11” H x 12” W Rectangle, 13” Round.
• Capacity at 60°: 11” H x 8” W Rectangle, 9.5” Round.
• Blade: 13’ 6” L x 1” W x .035” T (4115 x 27 x 0.9 mm)
• Blade Tension: Manual tension (30,000 psi) provides consistent square cutting accuracy.
• Speed Range: Blade speed is variable through a precision balanced step pulley and heavy-duty worm gear transmission.  Blade speeds are 105, 175, 270 and 375 feet per minute (32, 53, 82, and 114 meters per minute).  The broad speed range allows for optimum cutting of a large variety of materials.
• Hydraulic Down Feed: Infinitely variable feed rate is hydraulically controlled for fast, accurate cutting.  Settings are made at the operator’s control station.
• Hydraulic Frame Return: The saw frame is raised hydraulically using a push button mounted on the operator’s control panel.
• Motors: Blade Drive: 3 H.P. (1.5kW).  Hydraulic Pump: 1/2 H.P. (0.375kW) Coolant Pump Motor: 1/8 H.P. (0.09 kW).  
• Voltage: 230-2-60
• Blade Guides: Carbide Blade Guides provides reduced vibration, heat and blade stress providing longer blade life and accuracies of + .002 per inch (.051/mm) of cut material.
• Chip Brush: Powered from the drive wheel of the saw, the brush changes speed with the blade to assure that chips are being removed from each gullet, improving cutting performance and blade life.
• Vise Jaw: Hydraulic rack and pawl vise design clamps and holds the work piece securely.  The vise is operated by a selector switch located on the operator’s control panel.  Maximum vise opening is 18” (460 mm) and jaw height is 7” (177mm).
• Swivel: The saw frame swivels a full 60 degrees to the rear and 45 degrees to the front for optimum miter cutting capability.  The pivot shaft has sealed bearings for maintenance free operation, while a pointer and angle scale (-60° TO + 45° ) make setup fast and easy.  Stops are provided at -60 and +45 degrees.
• Operators Control Panel: Operation of the machine is safe and convenient from the swing arm pedestal mounted on the machine base.  Control Voltage is 110V.
• Other Standard Features
  • 16” (406mm) Diameter Cast Iron Blade Wheels
  • 30-1/2” (775mm) Work Height 
  • Built in Coolant System
  • 6 gal (23L) Coolant Tank 
  • Guide Arm with Dove Tail Slide
• Crated Machine Weight: 2300 lbs (1043kg)
• Machine Floor Dimensions (with miter): 86.5” W x  82.5” L x 53.25” H (2197 x 2096 x 1353mm H)

Options

• Free Standing Roller Table: 5’ long. Table is constructed from 3” x 4.1 lb./ft.  Channel with five 2.5” diameter ball bearing rollers on 12” Centers and two track stands.
• Variable Vise Pressure: Hydraulic clamping pressure to the work holding jaws can be adjusted as required to hold solid or thin wall material.