Baileigh Industrial

• Maximum Capacity: 60 ton
• Working Speed: 0.25" / sec.
• Working Width: 41.25
• Cylinder Stoke: 11.8"

• Power 220V/3-Phase 
• Digital Readout 
• Three Driven Rolls 
• Foot Pedal Controlled 

• Adjustable counterweight apron assist
• Adjustable beam
• 6" box depth
• 2-piece hardened finger assortment: 6 - 3", 6 - 4", 10 - 5", 11 - 6"

• Punch Height: 6"
• Working Speed: 0.51" / sec.
• Stroke Accuracy: +/– 0.002"
• Stroke Length: 12"

• 3.5HP Motor 
• 1.5" Drill Capacity 
• 108-1800rpm Spindle Speed
• 7.48" Spindle Travel 

• Blade Length 8"
• Max. Capacity Mild Steel 9ga. 
• 4HP Motor 
• 15 Strokes Per Minute 

• Forming Width: 36"
• Upper Roll Dia.: 2"
• Minimum Forming Dia.: 3"
• Wire Grooves: Yes

• High-Carbon, High-Chromium Blade and Hold Downs
• Front and Back Gauges
• Support Arms
• 26 Strokes Per Minute

• Motor Hp 1.5
• Filter Type Four Stage (Stainless steel mesh - Aluminum mesh - Pre-pleated filter - HEPA filter)
• Number of Filters 4
• Filter Size Stainless steel mesh(21.8" x 11.6")- Aluminum mesh(21.25" x 17.25" x 7/8") - Pre-pleated filter(23.3" x 23.3" x 1.5") - HEPA filter(24" x 24" x 11.5")
• Power 110V

The CS-C485SA is a 16-1/2" vertical column cold saw and is a semi automatic machine that uses a Yaskawa® inverter drive to control the saw blade speed up to 120 rpm's. This cold saw comes standard with an industrial grade coolant system, drive motor and hydraulic feeding system that will provide decades of profitable use to any demanding fabrication or machine shop.

• Maximum Load Capacity: 132 lbs.
• Spindle Speeds: 5
• Drilling Capacity: 3/4" Mild Steel
• Swing: 16"

• Spindle Taper MT3
• Table Slot .625"
• Tapping Capacity 1/2"
• Main Motor 2 hp

• Mild Steel Pipe Schedule 80: 4"
• Mild Steel Round Tube Wall: 5" x 0.083"
• Degree of Bend (Max): 17212
• Minimum CLR: 6"

• Replaceable Bronze Bushings At All Pivot Points 
• 180 Degree Bends, Without Repining The Die 
• Quick Change Hook Sleeve Inserts, No U-Straps 
• Anti-Sping Back Mechanism Included 

• Dual swivel head - 0-60º, 45ºL
• 220V, 1PH
• 2HP
• 10" Round Capacity

• 224 Tons Of Bending Pressure
• Available In Lengths Of 10' or 13'
• Can Store Up to 40 Programs with 25 Bends
• Accuracy of + - .01mm

• Roll Adjustment Hydraulic
• Pipe Capacity Size: 6" (sch. 40) / Min. Dia.: 98"
• Square Tube Capacity Size: 4.7" (.315")
• Solid Round Capacity Size: 4" / Min. Dia. 40"

• 18-Gauge Mild Steel Capacity
• 28" Throat Depth
• Flip Out Tool Holder
• Includes 6 Radius Anvils

• 120" x 1/4" Mild Steel Capacity
• Front Material Guides
• Fast Blade Gap Adjustment
• Shadow Line For Material Placement

• 3000 Rpm
• 220V Single Phase
• 3 Horse Power
• 4" Dust Collection Port

• Speed Control: Inverter
• Speed Range: 40 to 230 rpm
• Shank Hole: 1.25”
• Angle Adjustment: 0 – 60°

• Runs on 110 volt single-phase power, compatible with practically any fabrication site.
• Platen, slack, & contact wheel grinding accommodate a wide variety of grinding jobs.
• 2 fixed wheels diameters.
• Includes an adjustable work rest to match up perfectly with the different contact areas.

• Movable Cylinder: Yes
• Ram Size: 3"
• Working Width: 31"
• Power: Manual

• Electric Back Gauge With Manual Micrometer Adjustment Standard
• Extra-Wide Guideways For Exceptional Rigidity
• Adjustable 2-Step Downward Travel For Higher Productivity
• Oversize Hydraulic Tank With High-Performance Pump Smooths And Stabilizes Oil Flow