Shop Fox 3HP 230V Single Phase 15” Fixed-Table Planer with Helical Cutterhead W1874

Description

The W1874 15" Fixed Table Planer W/Helical Cutterhead features a powerful 3 HP motor and 5200 RPM, 4-row helical cutterhead. The fixed table height design allows for permanent infeed/outfeed roller setups for greater efficiency in production settings. Carbide inserts with 4 cutting edges make for ultra-smooth finishes in figured wood and last up to 10 times longer than conventional knives. The 2-speed gearbox allows you to choose between 16 and 28 FPM for a smooth finish or high production feed rate. Sturdy four-column supports with twin gas struts on either side make for easy headstock height adjustments.

Features

• Large Top‐Mounted Handwheel
• Cabinet‐Style Stand
• Internally Mounted 3HP Motor
• Poly‐V Belt Drive
• Magnetic Switch
• Four Heavy‐Duty Support Columns
• Anti‐Kickback Fingers
• Drive Gears Run in Oil Bath
• Cast‐Iron Extension Table Wings
• Includes Knife‐Setting Jig
• Elevation Scale with Both Inch and Metric
• Powder‐Coated Finish

Specifications

• Product Dimensions
  • Weight: 302 lbs.
  • Width (side‐to‐side) x Depth (front‐to‐back) x Height: 25 x 49 x 47‐1/2 in.
  • Footprint (Length x Width): 21 x 18‐1/2 in.
• Electrical
  • Power Requirement: 230V, Single‐Phase, 60 Hz
  • Full‐Load Current Rating: 12A
  • Minimum Circuit Size: 20A
  • Connection Type: Cord & Plug
  • Power Cord Included: Yes
  • Power Cord Length: 10 ft.
  • Power Cord Gauge: 12 AWG
  • Plug Included: Yes
  • Included Plug Type: 6‐20
  • Switch Type: Magnetic Switch w/Thermal Overload Protection
• Main Motor
  • Horsepower: 3 HP
  • Phase: Single‐Phase
  • Amps: 12A
  • Speed: 3450 RPM
  • Type: TEFC Capacitor‐Start Induction
  • Power Transfer: V‐Belt Drive
  • Bearings: Shielded & Permanently Lubricated
  • Centrifugal Switch/Contacts Type: External
• Planer Size: 15 in.
• Max. Cut Width: 15 in.
• Min. Stock Length: 6 in.
• Min. Stock Thickness: 3/16 in.
• Max. Stock Thickness: 6 in.
• Number of Cuts Per Inch: 108, 62
• Number of Cuts Per Minute: 20,800
• Cutterhead Speed: 5200 RPM
• Planing Feed Rate: 16, 28 FPM
• Max. Cut Depth Planing Full Width: 1/8 in.
• Max. Cut Depth Planing 6‐Inch Wide Board: 3/16 in.
• Cutterhead
  • Cutterhead Type: Helical
  • Cutterhead Diameter: 2‐5/8 in.
  • Number of Cutter Rows: 4
  • Number of Indexable Cutters: 48
  • Cutter Insert Type: Indexable Carbide
  • Cutter Insert Size Length: 15mm
  • Cutter Insert Size Width: 15mm
  • Cutter Insert Size Thickness: 2.5mm
• Table
  • Table/Headstock Movement: 6 in.
  • Table Bed Size Length: 21 in.
  • Table Bed Size Width: 15 in.
  • Floor‐to‐Table Height: 30‐3/4 in.
  • Table Wings Size Length: 14 in.
  • Table Wings Size Width: 15‐1/2 in.
• Construction
  • Table: Precision‐Ground Cast Iron
  • Body: Cast Iron
  • Stand: Steel
  • Cutterhead Assembly: Steel
  • Infeed Roller: Serrated Aluminum
  • Outfeed Roller: Rubber
  • Paint Type/Finish: Powder Coated
• Measurement Scale: Inch & Metric
• Number of Dust Ports: 1
• Dust Port Size: 4 in.
• Mobile Base: D4666