Heating & Cooling

  • Effective Volume: 7,062.93 cu.ft
  • Typical Extraction: 62 ppd
  • Airflow: 360 CFM
  • Power Supply: 900W, 60 Hz, 110V Single Phase

  • High Fire Rate (BTU/HR): 60,000
  • Low Fire Rate (BTU/HR): 45,000
  • Heat Exchanger Length: 30 ft
  • Electric Supply: 120 V AC, 60 HZ, 1 Amp: 36” cord, grounded 3 prong plug
$2,862.00
$2,290.00

  • Motor: 110V Single Phase
  • Gauge Capacity: 26-18 Ga
  • Material Width Capacity: 60”
  • All Gear Drive

  • 60,000 btu/h cooling capacity
  • 41,600 btu/h heating capacity
  • Runs on 460V 20-amp 3PH circuit
  • Variable frequency drive airflow control
$22,995.00
$17,246.25

  • Motor: 440V Three Phase
  • Max Width: 72”
  • TDFC Width: 44”-56”-68”
  • Slip and Drive Width: 48”-60”-72”

  • 60,000 BTU/H – 5 Ton capacity air-cooled
  • Runs on 1PH 230V 60-amp circuit
  • Internal high lift condensate pumps and a 5- gallon reservoir tank
  • Three fan speeds
$13,995.00
$10,496.25

  • Effective Volume: 8,369 cu.ft
  • Typical Extraction: 95 ppd
  • Airflow: 294 CFM
  • Power Supply: 800W, 60 Hz, 115V Single Phase

  • 29,500 BTU/H – 2.5 Ton capacity water-cooled
  • Runs on 230V 20-amp 1PH circuit
  • Internal high lift condensate pumps and a 5- gallon reservoir tank
  • Wide Operating range of 60ºF-110ºF
$7,195.00
$5,396.25

  • Gauge Range: 18-26 Ga
  • Motor: 7.5HP 440V Three Phase
  • Line Speed: 75 FPM
  • Passline Height: 34”

  • Fire Rate (BTU/HR): 100,000
  • Heat Exchanger Length: 20 ft
  • Electric Supply: 120 V AC, 60 HZ, 1 Amp: 36” cord, grounded 3 prong plug
  • Flue and Outside Air Connection: 4” O.D. connection for flue adapter provided at the heater
$2,484.00
$1,987.00

  • High Fire Rate (BTU/HR): 175,000
  • Low Fire Rate (BTU/HR): 130,000
  • Heat Exchanger Length: 60 ft
  • Electric Supply: 120 V AC, 60 HZ, 1 Amp: 36” cord, grounded 3 prong plug
$4,456.00
$3,564.00

  • Motor: 110V Single Phase
  • Gauge Capacity: 26-18 Ga
  • Material Width Capacity: 72”
  • All Gear Drive

  • Diffusion filter disperses exhausted air
  • Disperses exhausted air
  • Filter guards install and remove easily without tools for quick access to filters
  • Four eye bolts allow suspension from shop ceiling
  • Indicator lights up after 200 hours to remind user to replace filters

  • Power Supply (Volts): 115 V / Single Phase
  • Air Flow (CFM): 1000/875/750 - 3 Speed / Quad Directional
  • ULPA/HEPA Filter: 99.97% @ > .3 Microns
  • UVC Light Wave Length: UVC 30 Watts / Max 85 Watts x 2
$3,195.00
$2,275.00

  • Two (2) 5” x 16” flexible chutes
  • Air housing with 5” duct collars and clamps
  • Necessary hardware to install the KDC to the unit
$250.00
$229.00

  • Two (2) 6” x 18” flexible chutes
  • Air housing with 6” duct collars and clamps
  • Necessary hardware to instill the KDC to the unit
$295.00
$259.00

  • Two (2) 8” x 21” flexible chutes
  • Air housing with 8” duct collars and clamps
  • Necessary hardware to install the KDC to the unit
$375.00
$319.00

  • Two (2) 10” x 24” flexible chutes
  • Air housing with 10” duct collars and clamps
  • Necessary hardware to install the KDC to the unit
$395.00
$329.00

  • Two (2) 12” x 36” flexible chutes
  • Air housing with 12” duct collars and clamps
  • Necessary hardware to install the KDC to the unit
$595.00
$459.00

  • Effective Volume: 10,594.4 cu.ft
  • Typical Extraction: 71 ppd
  • Airflow: 650 CFM
  • Power Supply: 1500W, 60 Hz, 110V Single Phase
$3,500.00
$3,325.00

  • 3-Speed Motor
  • Delivers Up to 2,400 CFM
  • Multiple Air Flow Position Settings
  • Ability to Daisy Chain Multiple Units
$445.00

  • Motor: 220V Three Phase
  • Max Width: 72”
  • TDFC Width: 44”-56”-68”
  • Slip and Drive Width: 48”-60”-72”

  • Length: 12 ft
  • Fire Rate (BTU/HR): 60,000
  • CSA Approval: Outdoor Only
  • Gas: Natural Gas and Propane Gas
$3,838.00
$3,070.00

  • Length: 17 ft
  • Fire Rate (BTU/HR): 100,000
  • CSA Approval: Outdoor Only
  • Gas: Natural Gas and Propane Gas
$5,008.00
$4,006.00