Shop Fox 2HP 115V Single Phase 10” Hybrid Table Saw with Riving Knife W1888

Description

A hybrid table saw with innovative features. The W1888 10" Hybrid Table Saw from Shop Fox combines features of a cabinet-style table saw and a job site table saw. Like a cabinet saw, it has a precision-ground cast-iron table, a cabinet-mounted cast-iron trunnion, and a Poly-V drive belt for reduced noise/vibration. It is compact with a smaller footprint and has a price that’s significantly lower than a cabinet saw. The W1888 efficiently collects sawdust in two capacities: off top through the dust port on the blade guard and below through the internal dust shroud. These merge just before the 4" dust port. The easy-glide, two position fence system quickly converts for narrow ripping. The 2 HP dual voltage motor is prewired for standard household power and will rip all day long.

This combination of features will beat all others in its class. Like all Shop Fox table saws, the W1888 comes with a 2-year warranty which covers parts and assures the unit is free from factory defects. (Consumables are not covered by the warranty.) The W1888 manual was written by Shop Fox's U.S. based Technical Documentation Department and is packed with useful information. The complete and easy-to-read manual makes it easier to assemble and maintain your saw. The Woodstock Customer Service and Technical Support Teams are U.S. based. Parts for the saw may be available online and shipped from the Woodstock parts warehouse in Springfield, MO.

Features

• Fully Enclosed Quick‐Release Blade Guard and Spreader
• Quick‐Release Riving Knife
• Hinged Motor Cover
• 4" Dust Port
• Heavy Cast Handwheels
• T‐Slot Miter Gauge
• Poly‐V Drive Belt for Reduced Noise/Vibration
• Precision‐Ground Cast‐Iron Table
• Cabinet‐Mounted Cast‐Iron Trunnions
• Durable Powder‐Coated Finish
• Deluxe 2‐Position Aluminum Rip Fence
• Easy‐Glide Fence System with Micro‐Adjustment
• Standard & Dado Table Inserts
• Built‐In Dust Port on Blade Guard
• Included 10" x 40T Carbide‐Tipped Blade

Specifications

• Product Dimensions
  • Weight: 403 lbs.
  • Width (side‐to‐side) x Depth (front‐to‐back) x Height: 66 x 40 x 48 in.
  • Footprint (Length x Width): 19‐1/2 x 20‐1/2 in.
• Electrical
  • Power Requirement: 115V or 230V, Single‐Phase, 60 Hz
  • Prewired Voltage: 115V
  • Full‐Load Current Rating: 16A at 115V, 8A at 230V
  • Minimum Circuit Size: 20A at 115V, 15A at 230V
  • Connection Type: Cord & Plug
  • Power Cord Included: Yes
  • Power Cord Length: 6 ft.
  • Power Cord Gauge: 14 AWG
  • Plug Included: Yes
  • Included Plug Type: 5‐20 for 115V
  • Recommended Plug Type: 6‐15 for 230V
  • Switch Type: Push Button w/Large Shut‐Off Paddle & Removable Key
  • Voltage Conversion Kit: X1888224X
• Main Motor
  • Horsepower: 2 HP
  • Phase: Single‐Phase
  • Amps: 16A/8A
  • Speed: 3450 RPM
  • Type: TEFC Capacitor‐Start/Run Induction
  • Power Transfer: Belt
  • Bearings: Shielded & Permanently Lubricated
  • Centrifugal Switch/Contacts Type: External
• Table Saw Type: Hybrid
• Maximum Blade Diameter: 10 in.
• Arbor Size: 5/8 in.
• Arbor Speed: 4000 RPM
• Maximum Width of Dado: 13/16 in.
• Blade Tilt Direction: Left
• Max Blade Tilt: 45 deg.
• Maximum Depth of Cut At 90 Degrees: 3‐1/8 in.
• Maximum Depth of Cut At 45 Degrees: 2‐1/8 in.
• Max Rip Right of Blade w/Included Fence & Rails: 31‐1/2 in.
• Max Rip Left of Blade w/Included Fence & Rails: 11‐3/8 in.
• Blade
  • Included Blade Information: 10 in. x 40T
  • Riving Knife/Spreader Thickness: 0.100 in.
  • Required Blade Body Thickness: 0.063 ‐ 0.094 in.
  • Required Blade Kerf Thickness: 0.102 ‐ 0.126 in.
  • Rim Speed at Max Blade Diameter: 10,500 FPM
• Table
  • Floor to Table Height: 34‐1/4 in.
  • Table Size with Extension Wings Width: 40‐1/8 in.
  • Table Size with Extension Wings Depth: 27 in.
  • Distance Front of Table to Center of Blade: 16‐1/4 in.
  • Distance Front of Table to Blade At Maximum Cut: 11‐1/2 in.
  • Main Table Size Thickness: 1‐1/2 in.
• Fence
  • Fence Type: Camlock T‐Shape w/High‐Low Profile Face
  • Fence Size Length: 34‐5/8 in.
  • Fence Size Width: 4‐5/8 in.
  • Fence Size Height: 3 in.
  • Fence Rail Type: Square Steel Tubing/Angle Iron
  • Fence Rail Length: 63 in.
  • Fence Rail Width: 3 in.
  • Fence Rail Height: 1‐3/4 in.
• Miter Gauge
  • Miter Gauge Slot Type: T‐Slot
  • Miter Gauge Slot Size Width: 3/4 in.
  • Miter Gauge Slot Size Height: 3/8 in.
• Construction
  • Table: Precision‐Ground Cast Iron
  • Wings: Precision‐Ground Cast Iron
  • Cabinet: Pre‐Formed Steel
  • Trunnions: Cast Iron
  • Fence Assembly: Steel w/Aluminum Fence
  • Rails: Steel
  • Miter Gauge Construction: Cast Iron
  • Guard: Clear Plastic
  • Body/Cabinet Paint Type/Finish: Powder Coat
  • Arbor Bearings: Sealed & Permanently Lubricated
• Number of Dust Ports: 2
• Dust Port Size: 1‐1/2, 4 in.
• Compatible Mobile Base: D4666