SCM Group Multi-Blade Gang Rip Saw Class M 3 S

FREE SHIPPING

Manufacturer Part: EMT ID:
class m 3 s
10594

  • Maximum depth of cut 4 3/4”
  • Maximum working width 11 7/8”
  • Main motor 42 HP
  • Feed motor 2 HP
Details below

Description

Monoblock Base
Monoblock technology is used in this base which means it is made of a solid welded
base that is t hen normalized to ensure permanent tolerances. By using monoblock
technology, consistency in machine quality is further insured. All machine mechanisms
are mounted, aligned, and referenced to the base. With bolted frames, the opportunities
for components to loosen and misalign are greatly increased.

Solid Piece Cast Iron Table
For maximum tolerance, and reliability, a single piece cast feed table is used. This when
mounted into the monoblock base creates a permanent reference point for the alignment
of the saw. Also this massive table ensures that any vibrations in the machining process
are absorbed away from the workpiece.

Cast Spindle Housing
Simple but effective, the M3 spindle is mounted in a massive cast housing with four
bearings to ensure maximum rigidity. The spindle housing is an eccentric as well, making
it a simple machine. This allows for worry free blade diameter positioning for easy,
accurate setup every time.

Cast Linked Feed Track
The M3 uses a substantial cast feed track with individual links. These links are precision
milled to ensure maximum operational tolerances, and can also be replaced individually.
This sometimes eliminates the need for replacing an entire track.

Self-Centering Saw Blade Sleeve
Advanced Machining is used in the M3 saw blade sleeve to ensure proper saw blade
group positioning. This sleeve has been machined with a conical taper that properly
centers the unit each time it is fitted into place. This helps make for easier changeover of
the blades during setup.

Easy Blade Change
All M3 gang rip saws now include an additional saw sleeve further simplifying setup
between runs. An easy set up stand mounted on the machine is also standard

Automatic Feed Track Lubrication
Automatic lubrication ensures operation under severe working conditions. This track
lube system operates consistently once with every cycle of the feed chain, minimizing
guide way ware. Additionally a rear feed track dust hood is included to remove dust
which can ware guides and clog the oiler.

Anti-Kick Back Protection
Due to the natural mechanics of a rip saw, safety must be a major concern. This is probably the number one reason for
considering the M3 gang rip. Over its years in service, SCM Group has continually worked to make this machine one of the
safest saws on the market. We have put an impressive group of 4 sets of anti-kick back fingers in order to accomplish that
goal.

Short Stock Shoes
The short stock shoes which come standard allow the machine to work with parts as low
as 390mm (15.5”) long.

Extended Infeed Fence
A long fence at the infeed of the saw enables easier handling of long workpieces for straighter cuts

Safety Lockout On Access Door
A safety switch is mounted in the locking handle to ensure the machine will not run with the door open. This unit is threaded
allowing enough time for cutting blades to stop after operation before access door opens.

Variable Feed System
The feed chain is powered by a 2 Hp variable belt drive unit with serviceable gear box as opposed to a sealed variator
carried by competitive mode

Features

  • Four rows of anti-kickback fingers
  • Lockout safety switch on hood
  • Automatic chain lubrication
  • Variable speed feed unit with gearbox
  • Amp meter
  • Two (2) saw cartridge sleeves with spacers
  • Blades not included due to varying machine applications
  • Long infeed fence
  • Shaving hood
  • Monoblock base
  • Cast feed table and feed chain
  • “CSA” rated electrical components including cables

Specifications

  • Maximum depth of cut 4 3/4”
  • Maximum working width 11 7/8”
  • Main motor 42 HP
  • Feed motor 2 HP
  • Feed track width 11 7/8”
  • Feed speeds 30 – 150 FPM
  • Throat depth 8 3/4” (220mm)
  • Minimum board length 15.5” (390mm)
  • Saw blade diameter 200 – 350mm
  • Saw cartridge w/two keys 20 x 5mm, 70mm keys
  • Arbor 50mm
  • Dust outlet 200mm
  • Dust outlet on chain 120mm
  • Crated dimensions 71” x 65” x 58”
  • Net weight 3,787 lbs
  • Power requirements 230V
  • Dust extraction requirements 1336 CFM
Manufacturer
SKU
class m 3 s
Shipping Method
LTL Freight
Weight
3,787 lb
There are currently no reviews for this product.
Be the first to review this product.
Looking for parts? Let us know what you need in the form, or give us a call at 281-241-9504
SCM Group Multi-Blade Gang Rip Saw Class M 3 S
  • SCM Group Multi-Blade Gang Rip Saw Class M 3 S at Elite Metal Tools
Request Sale Price
Find out why Elite Metal Tools is the #1 SCM online distributor. Fast quote turn around, FREE SHIPPING, and much more.

Request Financing?

What is the Elite Advantage?

Free Shipping at Elite Metal Tools

Free Shipping

The Elite Metal Tools Promise!
Price Matching at Elite Metal Tools

Price Matching

The best prices on the web.
Customer Service at Elite Metal Tools

Customer Service

Our customers matter.
Knowledgeable Staff at Elite Metal Tools

Knowledgeable Staff

In our business, information is king.
Product Selection at Elite Metal Tools

Product Selection

Your one-stop-shop.