SCM Group Minimax 230V Three Phase Full Corner Rounding Interchangeable Glue Pot Edgebander ME 40ETR

Description

The Minimax ME 40ETR is a 3-phase automatic edgebander with great flexibility for both thin and thick edges, intended to bridge the gap between a traditional small to midsize edgebander for woodworkers. One of the key features is the pre-mill. There is no competition in the U.S. market for such a small, versatile machine, with pre-mill that is so economical! This machine is meant to be used with melamine edges, PVC, and ABS up to 3mm and wooden strips up to 5mm. SCM Group has the right machine for every application. This amazing machine boasts capacities usually only found on much larger units. This edgebander includes high frequency motors, a dual cutterhead pre-milling unit, an interchangeable glue pot, precise trimming units, and three finishing systems all in a relatively small footprint that is affordably priced.

• CONTROL SYSTEM
  • The control system for the Minimax ME 40ETR is a simple and intuitive use of the error-free machining and is ensured by the control positioned on the front of the edgebander which allows an easy selection of all of the main functions. These functions include the operating unit switching on/off and the PLC unit which guides the operator during maintenance, cleaning, diagnostic operations and much more.
• TRACK FEED SYSTEM
  • The Minimax ME 40ETR track feed movement system is designed for a perfect finish that eliminates transfer marks onto the work piece. 9 meter/min panel feed speed with track movement for increased productivity. Monitoring of the panel position is done by an encoder for total work cycle control.
• HIGH FREQUENCY MOTORS
  • Thanks to the high frequency motors of the end cutting unit and of the in-line trimming unit, the reliability of the Minimax ME 40ETR is unmatched. The maximum in precision, an optimal finishing level to an applied edge is always attained. With the absence of belts or other conventional driving systems, SCM has engineered less vibration into the unit, increasing reliability and high precision over the life of the machine.
• DUAL DIAMOND CUTTERHEAD PRE-MILLING UNIT
  • The Minimax ME 40ETR Pre-mill unit utilizes two 80mm diameter diamond tools with opposing rotation and timed intervention that, through the removal operation corrects any panel imperfections caused by the saw cutting process and panel storage. This allows for a clean edge and a good lineal finish during the pre-mill process. Pre-milling comes with an independent exhaust and air blower for cleaning of the panel during the process. You can carry out vertical adjustments of the tools for use even into the final sharpening phase. Allowing four levels of removal (0.5, 1, 1.5, and 2mm)
• INTERCHANGEABLE GLUE POT UNIT
  • The Minimax ME 40ETR edgebander features an interchangeable glue pot that allows the operator easier access to the glue pot. The glue pot is Teflon coated to allow for easy clean up and easy glue replacement with a quick heat-up system. The system applies the glue to the panel with a vertical glue spreading roller, and the temperature is adjustable via the PLC control. This machine also has a device to automatically recover any unused glue.
• TOP AND BOTTOM TRIM UNIT
  • The Minimax ME 40ETR has a very high edge quality finishing with the rotating copy wheels. The high frequency motors generate high cutter rotating speed, reducing to a minimum any marks left from trimming and guaranteeing the absence of vibrations. These cutters are designed for straight or radius trimming of any type of edge. The edge thickness is easily set by means of two numerical readouts.
• FULL CORNER ROUNDING END-CUTTING UNIT
  • During the process of removal of the front and rear exceeding edge; this two stage unit cuts and rounds the edge in a single pass at the end of the panel. Driven directly from the control panel it is possible to work with only the end cutting function for thin tape, and 3mm thick banding or wood. This is the first unit in its class to have this advanced engineering, this small of a footprint and overall capabilities at a price point that allows the small to medium-sized shop to compete
• EDGE AND GLUE SCRAPE UNITS, AND BUFFING UNIT
  • The Minimax ME 40ETR features scraping and buffing stations as standard for finishing of 3mm PVC/ABS edges. The scraping system assures an excellent finish, eliminating any excess glue on the panel or edge joint and keeping it free of chatter marks, thanks to the heavy duty structure. The precise horizontal and vertical copying wheels have chrome plated surfaces and assure accurate positioning of the knives. The buffing station includes high frequency motors for cleaning and polishing the edge. This unit is tilted and vertically adjustable to optimize the polishing and cleanliness of the work piece.

Machine Configuration

• PLC Control System.
• Panel Edge Trimming Unit for straight or full-corner rounding on thick or thin PVC, ABS, Melamine, Laminate or Wood.
• Interchangeable gluing unit with auto-sensory cooling to avoid burning of glue.
• Glue spreading roller with electrical resistance inside provides a uniform glue spread at maximum working temperature.
• End Cutting Unit with high frequency motor for best finishing.
• End Trim Unit with front and vertical copying wheels and high frequency motors to generate high cutter rotating speeds.
• Cutters are designed for straight or full-corner rounding with numerical readout setup.
• Radius Scrape for use on PVC/ABS edges with user-friendly exclusion of the device when not in use.
• Glue Scraping unit for removal of excess glue on the panel edge/joint.
• Brushing Unit for removal of excess glue on the panel edge/joint.
• Brushing Unit tilted vertically with adjustable motors.

General Characteristics

• Safety enclosure
• Control panel on machine infeed side
• Main frame made of bended and welded steel plates to ensure a high rigidity structure
• Top steel presser with two rows of rubber coated wheels mounted on bearings and enclosure that covers the wheels
• Manual adjustment of top beam with automatic positioning of the operating units according to selected panel thickness
• Numeric indicator of the selected panel thickness
• Feed track coated with high friction rubber fixed on a 3/4 industrial chain. Two sliding pad guideways, one round and one flat, to ensure straightness of movement and resistance to side loads. Manual track lubrication.
• Panel support roller which can be extended on the entire length of the machine
• Specific exhaust outlets for glue pot, pre-milling unit, and trimming unit
• PLC and 4” graphic display with large and luminous characters
• Selection of working language
• Keyboard with “soft touch” pushbuttons and led light
• Adjustment and indication of the glue pot temperature encoder positioned on the panel feed track pinion
• Padlockable main switch and overload protection
• Emergency pushbutton

Specifications

• Worktable dimensions: 136.4” x 28” (3465mm x 710mm)
• Min / max thickness of rolled edges: 0.4 - 3mm
• Max thickness of edges in strips: Up to 5mm
• Min. – max. panel height: 0.315” – 1.96” (8mm - 50mm)
• Min panel length/width: 7.48”/4.33” (190mm / 110mm)
• Feed motor power: 0.73 Hp (0.55 kW)
• Feed speed: 29.5 fpm (9 m/min)
• Operating temperature: 68 - 374°F (20 - 190°C)
• PREMILLING UNIT
  • Motor power: 3 Hp (2.2 kW)
  • Diamond cutter: Ø 80mm Z2 H=56
  • Blade rotation speed: 7,200 rpm
  • Stock removal: 0.5 / 1 / 1.5 / 2 mm
• GLUE POT UNIT
  • Motor power: 0.33 Hp (0.25 kW)
  • Glue capacity: 1.76 lbs. (0.8 kg)
• END CUTTING UNIT WITH RADIUS FUNCTION
  • Motor power: 0.25 Hp (0.19 kW)
  • End cutting blade: Ø 125mm Z12
  • Blade rotational speed: 12,000 rpm
• TRIMMING UNIT
  • Upper/lower motor power: 2x 0.47 Hp (0.35 kW)
  • Widia cutters: Ø 55.3 mm Z3
  • Cutters rotational speed: 12,000 rpm
  • Vertical/horizontal copying devices: Rotating/rotating
• BRUSHING UNIT
  • Motor power (each): 0.18 Hp (0.14 kW)
  • Rotation speed: 2,800 rpm
  • Electrical: 3-phase, 230v
  • Pneumatic operating pressure: 6.5 bar
  • Exhaust Outlet pre-milling unit diameter (x2): 2.36” (60mm)
  • Exhaust Outlet glue pot unit diameter: 3.15” (80mm)
  • Exhaust Outlet Diameter (x2): 2.36” (120mm)

*This machine requires a mandatory installation and training from the manufacturer. This comes as an additional charge that is NOT included in the website price. This additional charge includes the installation and full training on how to operate and maintain the machine. Please contact one of our sales representatives for more details.