Manufacturer Part: EMT ID:
st 4e

  • Maximum blade diameter w/ scoring blade in place 12.4” (315mm)
  • Scoring blade diameter 100mm X 20mm
  • Maximum depth of cut 3.75”
  • Blade Speed Main (Scoring) RPM 4000 (8000)
Details below


The Minimax ST 4E is a perfect compromise for customers who want to save space, but don’t need the jointer and planer
functions. This machine has many of the same components as a CU300 Classic combination machine sliding table saw,
with the shaper capabilities of a T55 W Elite, a machine that has proven itself in American shops countrywide. The Minimax
ST 4E boasts an 8.5’ sliding table and has features normally found on much more expensive machines, for a fraction of the
cost, standard! See for yourself why the Minimax ST 4E combination machine is the perfect solution for people who want
quality equipment in a smaller footprint.

The Minimax ST 4E has a large blade group with scoring as standard. Easily mount a
12” blade with scoring! The main blade and scoring blade raise and lower independently
of each other. The Minimax ST 4E Slider has hardened steel guideways with ball
bearings for a smooth action, the same design on our larger professional equipment!

The Minimax ST 4E has 50” ripping capacity and incorporates a heavy knuckle, to which the extruded aluminum rip fence is
attached. This knuckle features a cam locking device, and micro-metric adjustment!

The Minimax ST 4E comes standard with scoring. This allows you to not
only accurately cut panels, but you can cleanly cut them too. This is
important when cutting particle board, melamine, laminated panels, or
anything else to which you want to apply some type of edgebanding. If you
are cutting solid wood, simply drop it below the table surface independently
of the main blade. A 12” main blade capacity is featured without having to
remove the scoring blade. The scoring is belt-driven from the main motor.

The Minimax ST 4E comes with a separate mitre gauge. This way, for mitre cuts, the
operator can keep the main crosscut fence at 90° and use the separate mitre gauge to
do the angled cuts, saving time when mitering small panels.

The Minimax ST 4E comes with a heavy outrigger which mounts to the sliding table for
processing large pieces. It attaches to a telescoping support arm. The outrigger is easily
removed to free up space, and the support arm folds into the machine. Two flip stops come
standard, along with a telescoping crosscut fence. Although the machine comes with a
separate mitre gauge, you can easily use the scale on the outrigger for larger mitre cuts,
and the fence will go right back into the same position, so it is accurate and repeatable.

The Minimax ST 4E comes with a 4-speed tilting shaper as standard equipment. The
spindle is 1.25” diameter, and is interchangeable to allow for spindles of different sizes. A
router spindle can be supplied as an option. You can easily use the Shaper in conjunction
with the slider for a more versatile machine. Reversing is also standard.

The Minimax ST 4E comes with a separate hood for the shaper. This feature easily
dismounts to use the sliding table saw. This features micrometric adjustments to the
infeed and outfeed fences.

Two independent 6.5HP (3-phase X 230v) motors
Independently adjustable scoring blade
Rectified steel round sliding bar, 45mm diameter
8.5’ Sliding table with outrigger and swing-arm
Overhead Blade Protection @ 900mm cutting width with 80mm exhaust outlet
Interchangeable 1.25” shaper spindle & Micro-adjustable shaper fence
Spare 1.25” spindle
Spare spindle for router bits
Electric pre-setting and flip-over support for powerfeeder (powerfeeder is not included)
Tenoning Table with Hood
Tilting Shaper
Miter fence and eccentric hold-down clamp


  • Maximum blade diameter w/ scoring blade in place 12.4” (315mm)
  • Scoring blade diameter 100mm X 20mm
  • Maximum depth of cut 3.75”
  • Blade Speed Main (Scoring) RPM 4000 (8000)
  • Rip capacity 50”
  • Cast-Iron Shaper Table (without Slider included) 17” x 44”
  • Spindle size 1.25”
  • Capacity, under-the-nut 3.5”
  • Tilt 0 – 45 degrees
  • Spindle speeds (rpm) 1700 / 4000 / 7000 / 9000
  • Maximum tooling diameter: Shaping / Tenoning 8.25” / 10.5625”
  • Electrical 230 Volts
  • Minimum dust extraction volume 600 cfm
  • Weight 1,100 lbs
st 4e
Shipping Method
LTL Freight
Shipping Weight
There are currently no reviews for this product.
Be the first to review this product.
Minimax Sliding Table Saw st 4e
  • Minimax Sliding Table Saw st 4e at Elite Metal Tools